Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX).

Replacement handle shaft fits etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity. Durable, zinc finish resists corrosion. Designed for TJD-12000 Series jacks.

Replaces the sidewind handle from your etrailer or Ram swivel marine jack. Grooved handle grip allows for comfortable, easy cranking. Designed for MJ-1000BBX Series jacks.

Replaces the handle from your etrailer or Ram gooseneck coupler. Designed for use with GCPN Series, GCSQ Series, and GCSQTW Series couplers.

Replace the crank from your etrailer or Ram landing gear set (RVLG-8HDL). In case of power or mechanical failure, this crank handle will let you manually retract or extend the fifth-wheel landing gear legs.

Replaces the sidewind handle from your etrailer or Ram square, direct-weld, sidewind jack with a 3K- 7K capacity. Handle allows you to manually crank the jack. Handle arm has a corrosion-resistant, zinc finish. Designed for TJD-7000S Series jacks.

This steel rod lets you easily fine-tune your stabilizer jack's height. Insert the handle into one of the stabilizer's drop leg holes to crank the stabilizer into place.

Replaces the crank from your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity. Handle allows you to manually crank the jack. Mounting hardware included. Designed for TJD-12000 Series jacks.

Replaces the corrosion-resistant, zinc-finished topwind handle from your etrailer or Ram 2,000-lb or 5,000-lb jack. Handle lets you to manually crank the jack. Designed for TJA-2000, TJA-2001, TJA-2002, TJA-2006, and TJA-5000 Series jacks.

Replaces the topwind handle with claw knob from your etrailer or Ram jack. Fits TJA-5000T and TJB, TJP, and TJDP Series jacks.

Replaces the topwind handle from your etrailer or Ram square, direct-weld jack with a 3K - 7K capacity. Handle allows you to manually crank the jack. Handle arm has a corrosion-resistant, clear zinc finish and can be folded away for easy storage.

Replaces the crank handle on your etrailer or Ram scissor jacks (TJSCHD-24). Handle allows you to manually crank the jacks.

Replaces the sidewind handle from your etrailer or Ram swivel marine jack. Handle allows you to manually crank the jack. Handle arm has a corrosion-resistant, zinc finish. Designed for MJ-1000 Series jacks.

Replacement handle clip fits etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity. Designed for TJD-12000 Series jacks.

Replaces the topwind handle with claw knob from your etrailer gooseneck coupler (GCSQTW-30008).

Replaces the sidewind handle from your etrailer or Ram 2,000-lb A-frame jack (TJA-2000S or TJA-5000S-B). Handle allows you to manually crank the jack. Handle arm has a corrosion-resistant, zinc finish.

Replaces the sidewind handle from your etrailer or Ram swivel marine jack with a 1,500-lb capacity. Handle allows you to manually crank the jack. Handle arm has a corrosion-resistant, zinc finish. Designed for MJ-1500 Series jacks.

Replaces the red claw handle for Ram topwind jacks and 30,000 lb adjustable gooseneck couplers. Comfortable claw knob has a clear zinc bar handle and is easily folded away for storage.

Replaces the claw handle from your etrailer or Ram topwind jack or your 30,000-lb adjustable gooseneck coupler. Comfortable claw knob has a clear zinc bar handle and is easily folded away for storage.

Replaces the black handle grip from your etrailer or Ram sidewind jack. Grooved grip allows for comfortable, easy cranking.