Replaces the fuse for your etrailer or Ram electric A-frame jack (EJ-3520-BBX or EJ-3520-WBX).

This fuse holder lets you permanently mount a 300-, 350-, or 400-amp ANL fuse for a Bulldog Winch off-road winch near the battery of your Jeep or truck. Fits 0- to 4-gauge wires.

This fuse circuit tap kit allows you to add an accessory fuse to your fuse box without having to splice into your vehicle wiring. The fuse tap plugs into your fuse box and provides ports for your original fuse and the accessory system fuse.

Replaces the fuse in your Go Power inverter fuse block. 200-amp fuse installs to existing fuse block between your batteries and inverter.

200-Amp DC-rated, Class T inverter fuse protects your equipment during power use. Slow blow functionality utilizes a time-delay feature to withstand surge current. Polycarbonate block houses the fuse. Easy installation with included hardware.

Dual fuse tap lets you to add a fuse slot onto a mini ATM fuse to protect a your vehicle's electrical system. Main slot holds the original 10A fuse while the added slot holds a 5A fuse (sold separately). Plugs directly into fuse box. Single wire.

This 400-amp fuse breaks the circuit on your electric winch if the motor gets too hot. Use in conjunction with Bulldog Winch fuse holder to mount in-line between your winch and your vehicle's battery.

This 400-amp fuse breaks the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck. Fits 0- to 4-gauge wires.

110-Amp DC-rated, Class T inverter fuse protects your equipment during power use. Slow blow functionality utilizes a time-delay feature to withstand surge current. Polycarbonate block houses the fuse. Easy installation with included hardware.

These 200-amp fuses break the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your ATV or UTV. Fits 4- to 8-gauge wires.

This 15 amp ATC fuse is recommended for applications where over-current protection is required.

This fuse holder lets you permanently mount a 200- or 250-amp AFS fuse for a Bulldog Winch ATV/UTV winch near the battery of your ATV or UTV. Fits 4- to 8-gauge wires.

This 300-amp fuse breaks the flow of current to your recovery winch if the winch motor gets too hot. Use in conjunction with Bulldog Winch fuse holder to mount in-line between your winch motor and your vehicle's battery.

This 350-amp fuse breaks the circuit on your electric winch if the motor gets too hot. Use in conjunction with Bulldog Winch fuse holder to mount in-line between your winch and your vehicle's battery.

This 350-amp fuse breaks the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck. Fits 0- to 4-gauge wires.

These 100-amp fuses break the circuit on your electric winch if the motor gets too hot. Use in conjunction with Bulldog Winch fuse holder to mount in-line between your winch and your vehicle's battery.

Replaces a damaged 30-amp Slow Blow fuse for Ultra-Fab Power Twin II electric stabilizers with dual motors, models UF39-941705 and UF39-941707. Includes 1 fuse.

This 300-amp fuse breaks the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your Jeep or truck. Fits 0- to 4-gauge wires.

These 250-amp fuses break the flow of current from your vehicle's battery to your winch motor if the motor overheats. Included fuse holder lets you permanently mount the fuse near the battery of your ATV or UTV. Fits 4- to 8-gauge wires.

These 200-amp fuses break the circuit on your electric winch if the motor gets too hot. Use in conjunction with Bulldog Winch fuse holder to mount in-line between your winch and your vehicle's battery.

Replaces the fuse in your Go Power inverter fuse block. 300-amp fuse installs to existing fuse block between your batteries and inverter.