The Tuson Heavy Duty Truck Module Kit is used to convert the data network of your heavy-duty truck to a network that is compatible with the DirecLink brake controller (335DL-100 or 335DL-200NE). For trucks with a 9-pin Deutsch connector.

The Tuson Heavy Duty Truck Module Kit is used to convert the data network of your heavy-duty truck to a network that is compatible with the DirecLink brake controller (335DL-100 or 335DL-200NE). For trucks with a 9-pin Deutsch connector.

Wheel speed sensor cable is designed for your Tuson ABS setup (335ABS-DLNE-1000 or 335ABS-DLNE-1600). Connects 1 speed sensor (sold separately) to the ABS module. Includes (1) 30' long cable.

This sensor activation tool makes it fast and easy to ID pair your Tuson Towable Tire Pressure Monitoring System's sensors to the TPMS display/receiver. The tool will quickly detect if the sensor is operating normally or not.

The Tuson Heavy Duty Truck Module Kit is used to convert the data network of your heavy-duty truck to a network that is compatible with the DirecLink brake controller (335DL-100 or 335DL-200NE). For trucks with a 6-pin Deutsch connector.

The Tuson Heavy Duty Truck Module Kit is used to convert the data network of your heavy-duty truck to a network that is compatible with the DirecLink brake controller (335DL-100 or 335DL-200NE). For trucks with a 16-pin Deutsch connector.

Replaces the sensor for your Tuson RV Brakes TPMS. Includes 1 sensor.

Replaces the interchangeable valve stem for your Tuson RV Brakes TPMS. Includes 1 valve stem.

This kit is designed to attach a Tuson Tire Pressure Monitoring System sensor on a wheel with a rim diameter from 18" to 24". Kit includes a stainless steel cradle to hold the sensor in place and a steel band to attach to the tire rim.

Wheel speed sensor cable is designed for your Tuson ABS setup (335ABS-DLNE-1000 or 335ABS-DLNE-1600). Connects 1 speed sensor (sold separately) to the ABS module. Includes (1) 23' long cable.

Spring-loaded mounts hold your Tuson ABS wheel sensors (335R955335 or 335R955341 - sold separately) in place on your trailer with Kodiak disc brakes. Designed for use with your Tuson towable ABS setup (335ABS-DLNE-1600). Includes 4 mounts.

Wheel speed sensor cable is designed for your Tuson ABS setup (335ABS-DLNE-1000 or 335ABS-DLNE-1600). Connects 1 speed sensor (sold separately) to the ABS module. Includes (1) 6' long cable.

This kit is designed to attach a Tuson Tire Pressure Monitoring System sensor on a wheel with a rim diameter from 12" to 17-1/2". Kit includes a stainless steel cradle to hold the sensor in place and a steel band to attach to the tire rim.

Replacement LED module is designed for use with your Tuson electronic sway control system.

Wheel speed sensor kit works with your Tuson towable ABS setup (335ABS-DLNE-1600). Right-angle design is for use with Kodiak disc trailer brakes. Includes 4 speed sensors with 1' long leads and female connectors.

Cable brings power to your Tuson TPMS display screen to make it portable. Simply install a 9V battery (not included) inside the power cable box, and then turn on the repeater.

Replaces the valve stem for your Tuson RV Brakes tire pressure sensor. Designed for use with 0.625" diameter valve stem holes in a steel or aluminum wheel. Includes 1 valve stem.

Wheel speed sensor kit works with your Tuson towable ABS setup (335ABS-DLNE-1600). Right-angle design is for use with Kodiak disc trailer brakes. Includes 4 speed sensors with 5-3/4' long leads and female connectors.

Flexible mount allows you to mount your DirecLink brake controller to your windshield or lower dashboard for easy viewing and positioning. Fits all DirecLink brake controller models. Suctions for easy install.

Pedestal mount allows you to mount your DirecLink brake controller to your windshield or dashboard for easy viewing and stability. Fits all DirecLink brake controller models. Suctions for easy install.

Wheel speed sensor cable is designed for your Tuson ABS setup (335ABS-DLNE-1000 or 335ABS-DLNE-1600). Connects 1 speed sensor (sold separately) to the ABS module. Includes (1) 16' long cable.

Wheel speed sensor cable is designed for your Tuson ABS setup (335ABS-DLNE-1000 or 335ABS-DLNE-1600). Connects 1 speed sensor (sold separately) to the ABS module. Includes (1) 10' long cable.

Replaces the valve stem for your Tuson RV Brakes tire pressure sensor. Designed for use with 0.453" diameter valve stem holes in a steel or aluminum wheel. Includes 1 valve stem.

Wheel speed sensor kit works with your Tuson towable ABS setup (335ABS-DLNE-1000 or 335ABS-DLNE-1600). Straight design is for use with Dexter drum or disc trailer brakes. Includes 4 speed sensors with 5-3/4' long leads and female connectors.