ATV Ramps - Reese

For most golf carts you want to go with a 1,000 lb capacity loading ramp. I would however recommend the Erickson Arched Ramps part #EM07486 as they have a 3,000 lb capacity, an aluminum construction which will make them lightweight, and straps that…

Hey Jeremiah, The Flint Hill Goods Arched Ramp Set #FHG83ZR can be used with a max height of 25". If you need something that works with more height then you'll need the Arched Loading Ramp Set #288-07432-2 which can work with a 35" max…

Hey Jason, The individual ramps from the Flint Hill Goods Arched Ramp Set #FHG83ZR weigh in at 14.5 lbs so combined you're looking at 29 lbs.

Hello James, I am at a loss why Draw-Tite #75882 classified theirs as a class 4, it can handle the same weight as the Curt #C13207. The most concealed hitch would be the Curt #C13295, but it has the lowest towing weight so I am crossing that one off…

We have ramps that will work perfectly for loading your 1690lb UTV into the bed of your truck. I recommend the Arched Loading Ramp Set #288-07432-2 which is 90" long x 18" wide and has a combined weight capacity of 3000lbs. The included…

Hey Dan, thanks for reaching out. So I do have a solution that I want to run by you, but sadly, we do not offer a class 1 cargo carrier that has a built-in ramp. We do have a class 1 cargo carrier though, the Curt 19x47 Curt Cargo Carrier #C18110.…

Hey Taylor, The 3,000 lb weight rating of the Flint Hill Goods Arched Ramp Set #FHG83ZR is for both ramp combined. Each ramp has an individual weight rating of 1,500 lbs so combined it's 3,000 lbs altogether.

The replacement motor you need for your Tiffin part #8730 is the Lippert Replacement Gear Motor Assembly #LC383745 .

The correct replacement for your Power Gear 522176/8730 is #LC383745.

Hey Roger! Sorry but we don't have anything like that for any of our ramps like the steel item #FHG63ZR or aluminum item #FHG23ZR. I recommend getting a piece of matching material and fabricating a bar that will connect the two. What kind of…

The MORryde X-Factor Crossmember part #MR33WR is designed for standard suspension so that is the one you will need to use. If your leaf spring hanger brackets are wider than 3" then you will need to drill per the instructions which I have…

...Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1116 and then use an adapter # 16310 to mount your Patriot. For your specific model there is also the option to install the Reese Under-Bed Gooseneck...