I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…
Hey Charles, Yep, the Demco Autoslide 5th Wheel Trailer Hitch for Chevy/GMC - Single Jaw - Underbed #DM36SV is a kit that includes the Underbed Rail and Installation Kit #DM8551004 and the Demco Autoslide 5th Wheel Trailer Hitch #DM8550022. The…
Hey Duane, The Hellwig kit you referenced was designed for trucks and would not work for your trailer but we can still help. What you'd want instead is the SumoSprings kit part #TSS-106-40 which is for lighter duty trailers with underslung…
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hey Corry, you would basically want to mock up the Terran Industries Tandem-Axle Hanger Kit #TX85VJ with the 26-5/8 inch springs that you have and have the springs temporarily mounted in the hanger and the equalizers to get the correct dimensions to…
Hey Marc, it's the lower of the two holes in the Demco EZ Latch Coupler part #DM16080-95 that gets used for the hitch lock. We have that with part number #IR66FR which was specifically designed for this coupler.
The etrailer A-Frame Trailer Coupler w/ Round Jack Hole #CA-5280-RB uses the standard a-frame angle of 50 degrees. The length from the rear of the coupler to where the coupler meets its narrowest point is approximately 9" long. I have include…
Hey Rylan, I checked with Demco for you, and the Demco A-Frame Cast Head Coupler #DM37ZR will need Grade 5 hex bolts for installation. We don't have these but they can be found at any local hardware store.
Hi Kieran! I can definitely get you measurements for the Lock N Roll Articulating Flat Mount Trailer Coupler - Trailer Side - 10,000 lbs #LR77FR. The whole plate measures 3-1/4" x 9" and when measuring center to center, I got 2-1/8"…
Hello David, thanks for reaching out. It is possible to switch your trailer over to a lunette ring/pintle hitch system. Basically you will need to replace your current A-frame coupler with a channel coupler like part #LR76VR. This will allow you to…
Yes, you will be able to replace your stock coupler with the Demco 50-Degree A-Frame Trailer Coupler #DM13205-95 as long as you have a standard a-frame trailer. I attached a picture below of the dimensions below so you can see if it would work for…
Hey Jon, welcome back! Those are indeed for safety chains. The chain anchor holes are 1/2" in diameter on the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole item #DM13205-95. To attach a set of safety chains like the item #BPH94MR to them…
Received order, shipping and service was very fast. Thanks
Kurt
St. Louis, MO
Thumb Latch A-Frame Trailer Couplers: Secure and Easy
Thumb latch A-frame trailer couplers offer a secure and user-friendly hitching experience. Perfect for enthusiasts who value ease of use and reliability, these couplers ensure a snug fit and hassle-free operation, making your towing adventures smooth and enjoyable.
A thumb latch simplifies the hitching process by allowing quick and secure locking. It's designed for easy operation, ensuring a tight fit without the need for additional tools. This makes it ideal for those who frequently hitch and unhitch their trailers.
Thumb latch couplers provide a reliable and straightforward mechanism for securing your trailer. They are known for their durability and ease of use, making them a favorite among trailer enthusiasts who appreciate a no-fuss, secure connection.
Yes, thumb latch couplers are built to handle heavy-duty towing. They offer robust construction and a secure locking mechanism, ensuring your trailer stays firmly attached even under demanding conditions, making them suitable for a variety of towing needs.
Installing a thumb latch coupler is generally straightforward. Many find it fits well with their existing setup, and the process is often quick, allowing you to get back on the road with minimal hassle. It's a great choice for those who value efficiency.
A thumb latch coupler can impact tailgate clearance, especially with certain vehicle setups. It's important to consider the coupler's position and your vehicle's tailgate design to ensure there's enough clearance for smooth operation and access.
Filters
