5th Wheel Hitch Rails - Semi-Custom, Demco

...based on which pin box you have. The other option is an automatic slider hitch like the Demco Hijacker part # DM8550034. This will automatically slide back as you make tight turns allowing you...

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

Hey John, you actually are not supposed to mix and match rails with bracket kits. So if you are sure you have a set of B and W universal rails (they should be gray) then you could use just the bracket kit part #BWRVR2506. If you know the brand of the…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

It sounds like you could have a set of standard fifth wheel rails that most manufacturers use for their fifth wheel hitches to install into. The different manufacturers all make their own brand of rail kit, but they all have basically the same…

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

The two parts you mentioned (#RP87FR and #RP39FR) that fit your 2021 Ford F-350 Super Duty will both allow the ability to pull a gooseneck trailer with a gooseneck ball or use a 5th wheel hitch in the puck system. The only difference between them is…

Both the Jensen JWM6A and the current model, part #JWM62A are classified as double-DIN head units, which will both use the same sized rough openings in a vehicle dash. The old #JWM6A and the current model #JWM62A both use the same pigtail, as you can…

...an auto sliding model, you can't go wrong with the Demco Hijacker Autoslide, part # DM8550024 for an 18K capacity or # DM8550038 for a 21K capacity hitch. As you begin a turn, the head of the hitch...

Hey David, great questions! The Under-Bed Rail and Installation Kit #RP67KR comes with both the 30183 and 30924 parts of the hitch system and are the same as the Ford OEM puck system. All you need is this kit and you'll have the 4 pucks and…

...taking as many safety precautions as possible. For safety and peace of mind, we will always recommend a sliding hitch for truck beds between 8 ft and 6 ft long. A hitch like the Demco Hijacker...