Brophy D-Ring Tie Down Anchor - Bolt-On - 4-7/8" Wide - Recessed Mount - 1,600 lbs
Product Specs:
Tie Down Anchors
Trailer Tie-Down Anchors
Truck Tie-Down Anchors
Tie-Down Cleats and Rings
Recessed Mount
1600 lbs
D-Ring
Brophy
This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring and is zinc-plated for corrosion resistance.
Video of Brophy D-Ring Tie Down Anchor - Bolt-On - 4-7/8" Wide - Recessed Mount - 1,600 lbs
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Brophy D-Ring Tie Down Anchor - Bolt-On - 4-7/8" Wide - Recessed Mount - 1,600 lbs - RR05
Average Customer Rating: 4.9 out of 5 stars (408 Customer Reviews)
This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring and is zinc-plated for corrosion resistance.by: Double B04/22/2020
Great product and everything was included in the package. Even bolts.
This is definitely the way to go if you ware strapping down a med sized load. My application was ATV's and a UTV. I decided to strap over the tires so I used these and welded hooks for my application. See my pictures for details.
If you are looking for the right tiedown, this is it in spades.
by: James 09/30/2022
Good, solid, sunken tie down that works very well for my application. BP05 backing plate is what I picked up as well.
by: Christopher 09/18/2022
one year later and it hasnt broken. I have 4 of them holding my car on a 18 foot flatbed car hauler
by: Michael04/28/2022
While I had to wait for supply delay issues, they are worth it. My new ATC trailer came with 4 tie-downs and backing plates exactly like these. I have used the trailer with a car and look forward to adding these 8 additional tie-downs for motorcycles. They are of great quality and function properly.
by: Davis 09/17/2021
Very solid design and were pretty easy to install. Worked very well securing my motorcycle to the trailer.
by: Joseph 09/22/2020
Just one thing to improve and it is to sell tie downs as a package with bolts and nuts and a back plate
Comments
Great only problem the hardware should include steel plates for under trailer floor
Joseph - 09/23/2021by: Matt07/29/2013
This is an excellent product that I would but again. I started the project of installing D-rings in my utility trailer with d-rings purchased from Home Depot. The HD D-rings were the exact same product but with circular mounting holes (instead of the etrailer d-rings with square holes). The HD d-rings were a mistake. Hex bolts are really the only standard fastener that works with the circular holes. While hex bolts work they have sharp corners that catch on anything slide over them (like the heavy antique furniture I had to move for the gf). The hex bolts are also a 2 person job to install as with most installations you can't reach both the bolt and nut at the same time (2ft high sides to the trailer prevented an easy reach). The square holes allow installation with carriage bolts which were readily available at any home center in galv and SS. These have rounded heads that minimize catching/hang-ups when sliding materials over them. They also eliminate the need to hold the bolt head from rotation which keeps install to a 1 person job. Again, excellent product. I wish I didn't waste my time and $ buying the HD version the first go-around.
by: Dave. 02/10/2015
Tie downs were exactly as described. Fulfilled my needs for what I was using them for.
by: Jim K05/04/2020
Floor mounted D-rings have proven to be very useful. My only suggestion is to purchase twice as many as you THINK you'll need. You'll definitely find them to be convenient and weather proof.
Comments
Super!
JimK - 05/05/2021by: Richard02/05/2019
Good I would say....mounted in the wooden floor 3 1/4 in. hole + modifying to the "D" shape takes time though. 10 each were mounted to the floor perimeter 6x12 foot floor (deck), two 8 grade bolts catch the trailer metal frame, two other bolts with washers only mount to the wood deck. When secure load, most pressure is basically horizontal, I am comfortable with a load secured.
by: Ronald 07/25/2021
After 15 years my old floor anchors were rusting out! I redecked my trailer and installed these new flush mount anchors! Very well made and heavy duty!
by: Dan S.07/22/2017
These were received quickly. The quality is excellent. I use these as tie-downs on a new ATV trailer I purchased. Very happy with them.
Comments
All good! Thanks for asking.
Dan S - 07/23/2018by: Travis11/10/2018
The recessed trailer tie-downs are a great product. I have used them numerous times since I added them during a trailer overhaul project. Still work great!
by: Gary03/19/2022
My only complaint is that it didn't come with the bolts, but that's on me for failing to see it when I bought it. No complaint about the product at all.
by: James02/20/2019
Great tie downs for things like lawn equipment, ATV's, etc. Hole saw a hole big enough for it to fit flush and bolt on.
by: duane03/11/2013
Just as described. Ordered because you was only one that had backing plates. Checked all local stores first.
Comments
No problems and they work great. Thanks again.
-- comment by: Duane - 03/12/2014by: Scott S.05/16/2017
Customer service is and has been fantastic from etrailer. Each and every order has been shipped and handled with speed and acuuracy. Can't ask for any better from a company in a world of poor performers (the competition).
by: William N.04/15/2014
D-Ring tie downs are of high quality and along with the RR05 backplate, it will safely hold whatever you want to secure. Shipment is fast.
by: Donald04/16/2018
I was expecting to get bolts, nuts and backing plates with these. What I got did not include those items.
Comments
The product description indicates that the # BP05
Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor
$12.23 backing plate and hardware arent included. The reason we dont sell everything together as a kit is that the exact hardware needed and the need for the backer plate will depend entirely on the surface where the D-ring is mounted. A substantial metal surface wouldnt necessarily need a backer plate. The hardware needed can vary between a wood and a metal surface.
-- Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor
$12.23 backing plate and hardware arent included. The reason we dont sell everything together as a kit is that the exact hardware needed and the need for the backer plate will depend entirely on the surface where the D-ring is mounted. A substantial metal surface wouldnt necessarily need a backer plate. The hardware needed can vary between a wood and a metal surface.
Mike L - 04/17/2018
Helpful Linkby: Jacob 12/08/2021
Easy to install and they hold up very well in the mix weather conditions we see in the mid west.
by: Kyle 04/17/2015
Rock solid, chose to weld them on and there definitely not going anywhere. Originally bought 2 and once I saw the quality I ordered 4 more. as usual etrailer was quick and easy....fast shipping
by: Don K.10/01/2017
These showed up and after looking them over seem to be the same as what my local big box store was selling, these were a better price, now to cut holes and base plates.
by: Al Davis04/27/2017
Just what the steel doctor ordered! These tiedowns only supplement my stakebed, but wow what a great addition.
by: JT03/03/2017
Re-did floor on 40ft trailer. Do animal recuse also exotics. These will work great added a few more to tie down tiger cages. Thank you for the help and also the upgrade on shipping.
25
408
Show More Reviews
Do you have a question about this Tie Down Anchor?
VS
Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs
Product Specs:
Tie Down Anchors
Trailer Tie-Down Anchors
Truck Tie-Down Anchors
Tie-Down Cleats and Rings
Surface Mount - Bolt-On
1600 lbs
D-Ring
Brophy
Zinc-plated, corrosion resistant steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring. Includes backing plate and mounting hardware.
Video of Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs - RR5K
Average Customer Rating: 4.9 out of 5 stars (408 Customer Reviews)
Zinc-plated, corrosion resistant steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring. Includes backing plate and mounting hardware.by: Neil P.10/15/2018
I ordered 6 recessed D-rings Monday evening about 8 Pm. They arrived Wednesday morning 10. I live in Northern Wisconsin, That's awesome timing and its just standard shipping with UPS. The installation was good, just make sure you watch the video- It helps! It was easier after the first one - I used a 3 1/4 hole saw, went down to 3 3/4 in. deep. Then chisel it out to the 3/4 mark.
Helpful Hint ---- I used about 1 1/2 hole saw (take the drill out of course) then you use the hole saw in a circular motion to clean up the 3 1/4 hole down to 3/4 deep.
The 4 carriage bolt holes make sure these are straight.
But you can exceed the 3/8 drill size to give you some wiggle room. Which you will need to get the D-Ring straight.
I will use etrailer.com again and again! Very very excellent product and service!
Neil P.
Wisconsin
10-15-2018
Comments
Awesome, Still Strong,And still holding perfect tie downs.
Neil P - 10/16/2019by: Jason02/28/2022
Added these to the snowmobile trailer so that we could use it to tie down other items. Work great and we’re easy to install. Bought and sprayed a undercoating to protect my investment further.
by: Paul 08/25/2022
Although I have tie down hooks on the raised sides of my trailer, I purchased 6 of the Brophy D-Ring Tie Down Anchors and mounted them to the wood deck of my 5 x 8 utility trailer; 3 ea. along each side. I used a router to recess the plate portion and a drill to cut out for the cup part in order for the unit to sit down flush with the wood deck to prevent catching the blade of my flat shovel on the metal plate. By drilling the mounting bolt holes through and through, it was an easy matter to line up the backing plate on the bottom side of the wood deck. Note: There is a water drain hole in the bottom of the Tie Down 'cup.' Be sure to drill a corresponding hole through the wood deck so the water has someplace to drain. I am noticing just a bit of rusting, but the ring still lifts and drops with no problem.
by: Davey09/29/2022
Excellent item and perfect match for factory installed rings. Shipping was fast and customer service as always was outstanding.
by: Towerdude04/02/2018
Seems quality built. Installed 8 on my 16ft trailer. Had to kinda get the hang of drilling. Would recommend cutting your 3 1/2 hole, then put the top tie down in, then drill one bolt hole and put the plate on the backside, tightening down one bolt and nut. Try and even it out between top piece and bottom piece, then drill another hole for another bolt and nut. I tried drilling them all first and it didn't work as well.
The tie downs will strap ATV's onto a trailer.
by: Robert12/12/2022
I have been looking for a very good windshield protector, this one guards against snow and ice. It is extremely easy to install. I wish had this a long time ago. I purchased two, one for my car and one for my pickup. These work great. As always I have never had an issue with any of my purchases from etrailer. I am a completely satisfied customer, thanks etrailer.
by: Al07/11/2022
The backing plates make it easy to get this solidly mounted in my enclosed car trailer.
by: Rich03/15/2022
After one year, these tie downs are working to the greatest standard. Purchased them to hold down a side by side for traveling. No bending or flex. Used with the backing plates on a wood deck trailer. Highly recommended. Great service from etrailer! Thanks.
by: Brian05/31/2016
First time using etrailer.com. I used these tie down rings on my flatbed dirtbike trailer. Great product! Comes with all the necessary hardware to install. etrailer's videos and technical write ups make for an easy install. Fast shipping. Thank you etrailer!
by: Bruce B03/14/2015
Bought 4 of these recessed tie-downs with backing plates to secure my Ural Gear Up while transporting on my trailer. Very pleased with the price and quality. These tie-down points are heavy duty, and the installation video on the etrailer.com website was very helpful. I will shop trailer.com again!
by: Kris08/02/2019
Shipped in a timely manner, as always with you guys. The only reason I gave 4 stars instead of 5 is because these D-rings did not come with any installation instructions, to state that the holes were not square. I had to turn one of the backing plates 90* because of an interference with a bulkhead in my toy hauler. The holes are so close to being square it was hard to pick up on it. Once I discovered that they were not, I trimmed the backing plate to fit, and turned it back 90*, and holes lined up and finished the install. Overall, good product.
by: Perfect. 04/17/2017
These anchors are excellent come with all hardware and are easy to bolt up thanks to the the carriage bolts. You will need a 3.5 inch hole saw. I got a cheap [store] hole saw and installed these in 3/4 plywood. These are very heavy duty.
by: Jay M02/04/2014
These are great tie downs and easy to install if you have the slightest mechanical ability.
by: Bob G. - etrailer.com Employee12/05/2013
I have had 4 of these on my utility trailer for almost a year and they work great. I have tied down everything from a 4 wheeler to a small utility tractor with a loader on it and they hold great. The backing plate makes all the difference when mounting in wood.
I have also carried several loads of compost and there is no corrosion on the tie down ring or the housing.
by: Larry04/06/2015
Hold downs came last week and I installed the yesterday. The only problem was that the mount holes aren't square. The bottom plate only fits one way, and of coarse it wouldn't fit where I had it. Cut the plate and everything is fine. I mounted them in the corners of my race trailer to hold everything in place going down the road.
by: Cary 07/18/2022
Etrailer never disappoints. I received the order within a couple of days
by: Steve T06/17/2019
This is an awesome product !!! They were easy to install & work very well.I love the fact that they are recessed on my trailer bed so they don’t create a trip hazard & they look good.I would definitely recommend them to anyone that wants a quality,safe product.
by: Andy H.06/19/2017
These tie downs worked great for my side x side tie down. Excellent quality and corrosion protection. Would highly recommend them to everyone. Great delivery service and in a timely manner. Thank you!! Andy
by: Michael V.06/08/2017
I am very satisfied with this product. It was easy to install especially with the installation video on Youtube. It has worked great so far.
by: Michael 11/10/2022
Fast delivery, thanks
by: Thomas04/14/2022
Heavy duty and very functional. Very pl eased!
by: Jeff L. 10/14/2017
Wow! A great product delivered with great service. I bought these tie down anchors to replace the four original anchors in my enclosed trailer. The originals were soft steel or aluminum, and within a year had bent or stretched at key stress points, becoming unreliable. The pictures don't do these anchors justice. They are high quality, stout, heavy steel anchors with an equally heavy backing plate with quality hardware. Installation was easy following eTrailer's video. And, they shipped immediately. I couldn't be more pleased with the product and the experience.
Comments
A year and many tie-downs later, my anchors are as stout, secure, and as reliable as ever. These are a quality product.
Jeff L - 10/14/2018by: Christopher08/26/2021
These D rings are Shiney like the day I bought them a year later. They are sturdy and hold the tension of the tie downs just fine. Great product!
by: Mike R.05/29/2014
Perfect for my needs, shipped fast and quality products.
25
408
Show More Reviews
Do you have a question about this Tie Down Anchor?