It worked as expected but he male round plug bottomed out in my tractor and would not engage the latch on the lid to hold it in. Had to sip tie it in place. I have other 7 pin round plugs which work fine but this one seems longer than the others.1415553

Product exactly as advertised. John Deere tractor to hay wagon. Plug and play1477852

by: Elmer Platz08/19/2019

I received this item in a plastic bag, for a few moments i wondered if it was a knock-off. I had done my home work and was sure that this item would be compatible with the socket on my John Deere 2013 5085M at the time I ordered it, not so. The 'holding ridge' at the plug-in end was not in the right position when fully inserted into the plug on the tractor. I sent multiple pictures to Pollack Technical Support but they were unable to assist me. I finally modified the item myself (something I really hate to do) so that it would fit the plug-in and be 'grasped' by the cover/holder on the tractor side. As I anticipated, the thickness of the plastic was inadequate to make the adaptation 'sweet', so I had to cover the resulting hole with silicone caulk.691246

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Assembled with plastic sleeve to cover wiring. Sleeve has continuous slit and taped poorly at end with electrical tape. Priced reasonably.1427566

by: Charles06/01/2018

This is a great solution for adapting RV blade connector to 6 pole connector. I give it 5 stars. I use this for work purposes, and have found one issue that I DON'T believe to be manufacturer defect. In my industry we use different trucks and trailers daily, if not hourly. Some trailer electric brakes will lock up when adapter is connected. I have found the red wire in the adapter to be the problem. My solution was to splice in a switch so that when the intermittent problem arises I can flip the switch and be on my way. 515426

Thanks for the information Charles, I did want to let you know that there are two differnet wiring configurations for these 6-way connectors. Sometimes the red wire that you noted as the brake connector point can also be pinned as the 12V power wire. This would then activate the brakes, as you noticed. Your solution while it worked for your application is not something that we generally recommend for our customer in case they forget to flip the switch and are then towing without brakes on their trailer. For that instance we recommend repinning the connector and changing the 12V and Brake pins to correspond to the correct functions.

-- Rachael H - 06/23/2018

40117

Trailer Wiring Diagrams

Well I was hoping that the product was gonna take my 7 pin round 3 wire system on my truck and turn it into a 7 blade round 2 wire system for my trailer. But it doesn't Convert my system from a 3 wire to a 2 wire. But it does go from a 7 pin round to a 7 blade round.. So Ive ordered the converter to fix my problem.1058570

It is always a pleasure to shop at etrailer. Items are easy to locate on the website and delivered as promised. Thank you!1312579

by: Brad 04/27/2021

My trailer connector works great. Because I live a ways from town it was great to order it online and have it shipped. It arrived quickly. One note: When I was in town I did see the same connector at NAPA for the same price. All things considered, I'm happy with my purchase and would order from etrailer again.1023283

This adapter saved me a ton of headaches and time! I have a 1986 GMC K3500 that I tow with. I had an out of town event and a borrowed trailer I would be using. This adapter allowed me to just plug and go using my existing wiring set up. It performed flawlessly! I especially liked the built in tabs that lock in using the existing spring loaded cover to secure the plug in place. No worrying about the plug loosening up during the trip. The story would not be complete if I did not also mention the great customer service that helped me get this adapter when I needed it!229297

Got it just when it said it would be here. The 7 into 7 plug that was ordered is already on the truck an trailer. Thanks Guys.388070

Click to Enlarge

It’s a great product but not for my intended reason. It just adapts round pin to flat pin. I was looking for an adapter from commercial truck to RV trailer. Additional wiring is required to convert commercial to RV, gooseneck, etc. 854654

This item is high quality but the real "value" here is the outstanding customer service that etrailer provided. The 7 pin round plug provided didn't fit my 7 pin round socket and they went out of the way to research the difference in my socket and their plug. Great company.67136

by: Edgar 07/13/2022

Harness worked well !!! 1326685

by: Tim R.07/12/2020

seemed to be a good product , the only problem was going from 7 pin round semi connector to 7 pin rv style the trailer brake circuit did not line up , some rewiring was required so it would work with the brake controller ( if i would have i checked your website i would have known it sooner , no problem figured it out ) used truck and trailer alot since , no problems so far836989

We are so glad we found etrailer.com! We have never ordered an incorrect part because their info - and large bank of Q&As - has always told us everything we needed to know. I wanted to share our experience with the Pollack 7-way blade to 7-way round connector, part PK12-724. When researching for the correct part, we found a question from a buyer who had the same/similar vehicle, a 1993 Ford F-150 with a factory tow package. He was told to buy the PK12-724 but to cut the red and blue wires and cross-connect them. (This was info we we so glad to have!)

We did so, and most everything worked except the trailer back-up lights came on whenever the lights were turned on. We mentioned it at the RV place when we were there, and they checked it for us. Turns out that not only did we have that issue, but our trailer battery was not charging when hooked up and truck running. So on the blade end of the connector, they moved some of the wires around (see included illustration), and voila, everything now works correctly! I hope this is helpful to others. I believe the truck information is the most important info for this fix, but FYI our Trailer is a 1994 Komfort 27.441427

Have a '79 Dodge with the older style 7 round pin Pollack connector and bought a new camp trailer with the 7 pin spade connector...needed an adaptor. Their PK12-724 was the perfect fit! Well built, and works perfectly! Etrailer.com has fast order processing too. Very satisfied with the product, price & service!
547209

Product was exactly as described, and fit the unique need to convert the 7 pole to 7 blade trailer light system. This saved rewiring the vehicle and/or trailer.166479

by: WM01/10/2017

The adapter harness eliminated time & grief to replace/re-wire the commercial style plug on a farm tractor, allowing use of tail, turn, and brake lights on trailers with blade type connector. Works great.331319

The 14 inch extension 7 prong pigtail arrived very quickly as described. This is going to work perfect as I need the power cord from the trailer to the truck to be less than a foot longer to make the connection. Thanks for the really quick delivery on the perfect fix!! It appears to be very well built.
Marco371284

This converter plug and light tester is exactly what we needed for demands of the studio industry that we work in. Allows us to quickly check the trailer light system of our trucks and get them working.
Thanks for a great product.110939

This is awesome!! You can't buy the raw parts for what you can buy this adapter for. With my semi truck I can easily supply trailer lights to RV travel trailers and utility trailers. I wish I had know this product existed. I'll be buying several more!145047

Excellent quality adapter- now can use my 1992 F 350 to pull trailer with 7 blade without rewiring Ford factory receiver 7 pole Extremely pleased. Now both my Ford F 350 can pull cattle trailer.- nice to have back up available.190666

by: Gary L.09/01/2016

This particular adaptor was not available locally and we needed one on very short notice. The staff at etrailer made sure the product was shipped overnight so we could depart as planned the following day. While many promise good service it would appear etrailer actually has product in stock and works at getting it delivered on time, a combination that is not so common these days.

Thanks289800

All of our trucks come wired with round pole trailer plug and some of our trailers take 7 spade style this adapter solves our problem and is cheaper than buying the parts and making them our selves.847483

Works I need this to go from my John Deere tractor to my dump trailer1066956