Product Specs:
Lubricants Sealants Adhesives
Sealant
Multi-Purpose Sealant
1.22 oz
Loctite
This purple thread sealant is specially formulated not to contaminate fluids or gases when used to seal threaded components and pipe fittings on pressurized pneumatic and hydraulic systems. Prevents leakage of air, oil and automotive fluids.
Average Customer Rating: 4.7 out of 5 stars (3 Customer Reviews)
This purple thread sealant is specially formulated not to contaminate fluids or gases when used to seal threaded components and pipe fittings on pressurized pneumatic and hydraulic systems. Prevents leakage of air, oil and automotive fluids.
It worked great no leaks I used it on my hydraulic valves on my backhoe
Great transaction
Very satisfied the loctite work as expected
Customers compare LT37482 to these similar products
VS
Product Specs:
Lubricants Sealants Adhesives
Sealant
Nut and Bolt Sealant
1.22 oz
Loctite
This general-purpose, blue threadlocker locks and seals a variety of threaded assemblies, preventing unwanted loosening of nuts and bolts and thwarting corrosion of treated parts. Medium-strength formula isn't permanent, easing disassembly.
Video of Loctite Threadlocker 242 - Medium Strength - 1/4" to 3/4" Nuts/Bolts - 1.22-Fl Oz Bottle
Average Customer Rating: 4.8 out of 5 stars (122 Customer Reviews)
This general-purpose, blue threadlocker locks and seals a variety of threaded assemblies, preventing unwanted loosening of nuts and bolts and thwarting corrosion of treated parts. Medium-strength formula isn't permanent, easing disassembly.Locks the threads so the screw doesn't back off. Its holding down a tongue pivot bolt and a anti-rattle bolt currently. Only time will tell if it stays put per long run. Put it was exactly as desired.
1st time to use it and worth it
Great website, great prices, and appreciate the fast shipping. Thank you very much
Review from a similar Threadlocker in Lubricants Sealants Adhesives
This is a really solid base plate. Installation for the Pontiac Vibe was is definitely more involved that installing the alternative (Road Master). The Road Master base plate just bolts through existing bumper holes and an engine mount. This base plate is bolted directly to the frame just behind the bumper, with four 3/8" grade 5 bolts in holes you have to drill after clamping the base plate in place. I found it easy to get the required height (3/4" below bumper) but simply using a 1x3 piece of lumber. You also have drill a 1.25"hole in the frame to gain access to the inside of the frame. Tricky part of this install is getting the nuts, which are welded to a 1" plate and a ~14" steel rods, into place to be line up with the holes. It is a little hard to see. I also recommend making sure the bolts actually thread easily on to the nuts before putting the nuts in the the frame. I had the misfortune of one of the either cross threading or jamming, and I ended up having to cut the bolt head off with a sawsall using a metal blade. The bolt had not gone very far into the nut before it jammed so I was just able to get the sawsall blade behind the head, and cut it off, holding the head with a pair of vice grips. If that hadn't worked I would have had to take the car to a shop with oxy-acetaline torch to have it cut off. I was able to fish the cut of bolt out for the frame with a bent coat hanger. The first photo is of the base plate after I cut off the bolt.
Blue Ox support was GREAT! I sent them and email explaining that I needed new nuts and bolts, and they sent the needed parts (at no charge!). I just had to put my install on hold for several days.
The second problem I had was in attaching the electrical harness recepticle to the tubes on the to bar. One of the self tapping screws twisted off as I was tighting it. I ended up cutting of 1/2" of the tubes (with the sawsall) and then tapping the tubes with 1/4x20 threads, and regaining the length cut off with the bolt. My recommendation to blue ox, is that they tap these tubes with to 1/4x20, and provide regular bolts to attach the recepticle. The second picture showes the result.
When I showed the 3rd and 4th pictures to my mechanic, he was impressed and said, "That looks really solid!" The last picture shows the front of the car after I have started to assemble it (with the styrofoam padding on the bumper, and the draw bars in place.
The solidity of the Blue Ox engineering and the FABULOUS customer support has totally turned my into a Blue Ox fan. I'm glad my RV dealer suggested that I go with Blue Ox instead of the slightly cheaper solution, that would have been much less solid.
Review from a similar Threadlocker in Lubricants Sealants Adhesives
For the installation the instructions were good, but watching some videos made it much easier to take apart a brand new car. All went well. Installed on a 2020 Chevy Equinox 2.0
Review from a similar Threadlocker in Lubricants Sealants Adhesives
I will never go back to liquid threadlockers. This should be the industry standard. No mess, no waste, much more control, no spilling, and countless more benefits. I use it for small screws, so it makes it much easier to apply a more reasonable amount so I don't end up stripping the torx heads when I remove them from having to put too much torque on it to remove them. My only complaint about this product is that I didn't find it sooner!
Jens R - 12/03/2020Review from a similar Threadlocker in Lubricants Sealants Adhesives
Loctite is always a good thing!
Review from a similar Threadlocker in Lubricants Sealants Adhesives
Was easy to install and stabilized the RV significantly.
Review from a similar Threadlocker in Lubricants Sealants Adhesives
I ordered multiple Roadmaster products from etrailer.com to rebuild a used Roadmaster Sterling towbar and prepare my car for its first time towing behind the motorhome. The etrailer people are great to work with, the prices are good, delivery is quick, and free shipping for all of my orders. The technical support at both etrailer and Roadmaster is the best.
Review from a similar Threadlocker in Lubricants Sealants Adhesives
This stuff works! Used it to install my trailer hitch bolts.
Jeffrey - 04/08/2020Review from a similar Threadlocker in Lubricants Sealants Adhesives
I have used the LocTite products for many years. They make several grades of thread locking fluids, each appropriate for specific uses. Their products do exactly what they say they will; and will secure threaded parts from vibration or lock them together permanently. Your toughest choice will be in determining which product is most appropriate for your use. My recommendation is to start with the lowest strength and work you way up as needed. Just remember that without special tools, permanent means permanent with this product. The lower grades are very strong in preventing vibratory loosening.
Review from a similar Threadlocker in Lubricants Sealants Adhesives
Bought this product after watching the video how to install base plates on 2014 Honda CR-V. If you read the instructions talks about checking the bolts periodically for torque, now I don't know how many people are going to spend 4 hours pulling off the front bumper to this. So for peace of mind use this product so bolts won't come loose.
Review from a similar Threadlocker in Lubricants Sealants Adhesives
Reinstalling clutch, equipment manufacturer specifies using LOCTITE 262 on clutch reinstall. Unable to locate 262 except in large quantities in my area. Etrailer had the small quantity 262 and responded to my order immediately. Completed clutch reinstall and equipment is running fine. Thanks Etrailer
Review from a similar Threadlocker in Lubricants Sealants Adhesives
Bolts have not fallen off yet... lol They are all still tight.
Review from a similar Threadlocker in Lubricants Sealants Adhesives
Locktite makes very good products, and this is another one. Used for fasteners that are already assembled/torqued and it wicks into place. E-Trailer completed the order process and delivered the product as expected, so well-done to them.
Review from a similar Threadlocker in Lubricants Sealants Adhesives
Loctite 243 (blue) worked great on my Harley Road King Custom primary asse3mbly. Great service and fast shipping. Would recommend etrailer to anyone. Will buy from in the future.
Review from a similar Threadlocker in Lubricants Sealants Adhesives
Product was exactly as advertised, and as I wanted. Delivered as stated. etrailer is a great company to work with. This is the second vehicle I have outfitted, and they have had great videos and directions with their products.
Review from a similar Threadlocker in Lubricants Sealants Adhesives
Product worked great. Used it on a sun visor that would no longer stay up. Worked perfectly, would recommend for anyone.
Review from a similar Threadlocker in Lubricants Sealants Adhesives
Needed Loctite 262 to assemble my Harley Road King primary. Great service and fast shipping. Will buy from etrailer in the future.
Review from a similar Threadlocker in Lubricants Sealants Adhesives
Good product.
Review from a similar Threadlocker in Lubricants Sealants Adhesives
I am so glad I came across etrailer.com, They have what I need in stock, and show you how to use and or install the product.
They have great prices and fast shipping, What else could you ask for!
Review from a similar Threadlocker in Lubricants Sealants Adhesives
Stuff works great.
Review from a similar Threadlocker in Lubricants Sealants Adhesives
great! I have a set of these and ran out of the blue. Couldn't find it locally except in the size that holds only half as much. I was happy to find it here on etrailer. Great job etrailer.
Review from a similar Threadlocker in Lubricants Sealants Adhesives
Product worked as advertised. Can't ask for more than that. etrailer.com was very good at expediting my order. Thanks
Review from a similar Threadlocker in Lubricants Sealants Adhesives
Excellent product used it several times on some small nuts and bolts.
Customers compare LT37477 to these similar products
