bing tracking image

Trailer License Plate Mount Bracket, Heavy Duty Zinc Steel

Code: LP15SB

385 reviews

Our Price: $6.85


Product Specs:

Accessories and Parts

License Plates and Frames

Mounting Hardware



Video of Trailer License Plate Mount Bracket, Heavy Duty Zinc Steel

Customer Satisfaction Score:

Customer Reviews

Trailer License Plate Mount Bracket, Heavy Duty Zinc Steel - LP15SB

Average Customer Rating:  4.9 out of 5 stars   (385 Customer Reviews)

by: Paul11/14/2022

The materials are sturdy however, I'm a bit worried how well the horizontal bar holding the license plate onto the mounting bracket is attached. I wouldn't trust that it will hold up to much use but can be corrected by adding a couple of bolts and nuts just in case the attachment point doesn't hold up.

by: RVman08/07/2014

Are you kidding? This metal license plate mount is rock solid and under $2. The holes are set up perfectly to fit the mounting bolts on my driver side trailer light and the position of the license plate when mounted allows it to be lit by the clear lens on the bottom of the trailer light when the running lights are on. Also, the bracket allows the mounted license plate (and frame) to just clear the rail of the flat bed trailer itself. Yeah, it's a perfect fit. Thanks, trailer!!

by: Matthew05/18/2018

Sturdy material, but not completely universal. On my Carson trailer, I had to flip the bracket backwards since the indentation on the bracket come down far enough to allow for the trailer light box. Also, the hole line up tonattach to the light box was just off enough I had to force the bracket on. However, once I installed it, it was solid and so don’t fear it will come off on its own.

by: Richard04/29/2019

I think you will find these photos show a unique installation of your metal trailer license plate holder.
My Yamaha golf cart is street legal which requires a license plate. You will see in close up photo that the holder is used up side down for a custom fit.
Couldn't be happier. The plastic holder was not stiff enough so your holder is perfect.

by: Robert05/31/2022

I purchased two tag license frames, one for my boat trailer and the other for my trash/hauling trailer. Both trailers had plastic license holder frames and one broke on rough surface.

by: Robert 04/23/2021

The product was exactly as pictured and described. I am extremely pleased and recommend retailer products to anyone.

It works great. Absolutely no issues at all. I would highly recommend etrailer products to anyone.
Robert - 04/25/2022

by: Mark G04/17/2014

Old bracket was plastic and easily broke off. I Ordered a metal one from etrailer at a great price. I painted mine with some extra plasti dip I had laying around and riveted it where the old one was and it's better than new!

by: Robert 07/13/2022

Excellent product description with relevant questions and answers from prior customers!

by: Jerry Andalon 05/22/2017

Great well made product just as advertised. No more lost license plates due to cheap plastic brackets. This metal bracket looks like it's going to last a a life time!

by: Mike R.07/13/2013

Great product at a great price. Took five minutes to install.

Mike, where did you get your old black plastic bracket that broke? I had the exact same one and I liked it and it worked for me. I cant find a suitable replacement and would like another one just like this. Thanks!
-- comment by: Troy - 08/11/2014

by: Mike R.03/13/2017

This part was perfect for my liscense plate for my trailer . Thanks

Not to good plate came undone and flew off my trailer . Had to buy another liscense plate .
Mike R - 03/13/2018

by: Greg03/14/2022

Very happy with my order once received. Only downside was it took a long time using USPS. etrailer responded quickly. USPS did not.

by: Kenneth 11/21/2021

Both brackets arrived in great condition. There was an issue with the items being backordered from the manufacturer, however I was notified on their status weekly by Carol at eTrailer. Would recommend these items and eTrailer to any purchaser. Shout out to Carol for keeping me in the loop!

by: Craig 07/03/2022

Much better than the plastic one that came with the lights on the trailer.

by: William 07/17/2022

Excellent quality, easy online ordering and blistering fast delivery once again. Thanks

by: Frank 10/19/2022

Awesome fit!

by: Fred 09/11/2022

nice product and it was on sale

by: kenny04/22/2014

better than the cheap plastic bracket that came with trailer.

by: John03/10/2022

Fit perfect on the 7,000 lb utility tra iler.

by: Mark 01/11/2022

Everything that I have ordered from y'all has been perfect! Be ordering again I'm sure-I have quite a few trailers and such. Thanks again, Mark from Spicewood,Texas

by: Todd09/08/2022

Great price and fit nicely.

by: Jerry 09/09/2022

Fast. Great quality.

by: David S.03/29/2017

I received the license plate bracket 2,days early ,which I like. now all I have to do is repaint the wheel fenders and I can mount the bracket then I will be ready to go. I went with the metel unit because I have found that most BOX STORE plastic holders do not hold up and break. more to follow when I get done.

The bracket I have found is the best think since apple pie. Using the trailer both local and highway the bracket does not move and holds the plate very secure .all my plate brackets are going to be metel from now on.
David S - 03/29/2018

by: Gary 07/10/2022

Just fine.
What I expected

by: JohnD06/15/2019

Looks ok. Will know more about the quality of this License plate bracket on my jetski trailer after it has been dunked in the water many tmes.

This bracket was very well made, it fit correctly and has held up as expected. Good product and good CS.
John D - 06/16/2020

Show More Reviews

Customers compare LP15SB to these similar products

Do you have a question about this Accessories and Part?


License Plate Mounting Plate - Black

Code: CR79150

20 reviews

Our Price: $9.36


Product Specs:

Accessories and Parts

License Plates and Frames

Mounting Hardware



The Cruiser license plate mounting plate is ideal for contoured bumpers, trailers or novelty plates or to fill a recess in the plate area on the rear of your vehicle. Screws included.

Video of License Plate Mounting Plate - Black

Customer Reviews

License Plate Mounting Plate - Black - CR79150

Average Customer Rating:  4.9 out of 5 stars   (20 Customer Reviews)

The Cruiser license plate mounting plate is ideal for contoured bumpers, trailers or novelty plates or to fill a recess in the plate area on the rear of your vehicle. Screws included.

by: Marty 07/14/2022

Helen did a great job finding exactly what I was looking for without the best description on my end. Helen was easy to work with and a true professional! Will definitely order again through Helen!

by: Erica P.02/14/2016

The product was great, Exactly what I wanted, or needed for sure. I'd suggest that since this being the first time I placed a license plate bracket on my car, that an additional installation hint be noted on the directions. My suggestion would be for front installation to a vehicle. I would note that the bracket should not only be centered in the front of the vehicle, but as well centered in the front of the bumper. This way it would not be placed too high or too low on the front bumper itself. As well, not too many drilled holes would not be present, (as in my case).

by: David05/12/2019

I had purchased one these backer plates before which has damaged in an accident. I found another backer plate on the internet and when I received it I didn't bother even trying it on the car. I finally found the product offered by "etrailer" and ordered two. Not only is this a vastly superior product, it's less expensive and the customer service by is exceptional. I highly this company and this particular product.

by: Dearius08/27/2019

This was my first time purchasing an item from etrailer, and I am extremely impressed with the constant updates the company provided regarding shipping details, the fast shipping, and the quality of the product. I will be sure to tell others about my wonderful experience with etrailer!

Thanks again!

by: jim08/21/2015

it was just what I needed, it held my front plate that I had on all my cars for years, but this one didn,t have a bracket, so thanks it does now, jim

by: Brian D.08/11/2014

Good value for the money. Does include screws to mount license plate to the adapter - does not include screws to mount the whole assembly to the bumper.

by: Rich M.06/06/2015

product delivered as promised, the bracket was good quality and was easy to install on the curved front bumper of my corvette. The price was great compared to the 49 to 119 dollars from the dealers

by: Dan S05/22/2017

Bought to mount my license plate on my trailer. Works just as I would expect it to.

by: Bob J09/12/2015

I wanted something I could put a plate on the front of our new Chevy Trax without drilling the bumper. I used some pipe insulating foam to make the bumper evened out and used wire ties to hold it in place . This really worked well and the product arrived promptly and undamaged .

by: Bob08/03/2015

perfect for autos with no front plate bracket. I used it on the front of my new Tacoma. Now I'm going to order another for the front of our other car.

by: Marty M06/03/2016

Easy to mount and protects plate from b reakage.

by: Bob08/14/2015

this is my second order. I was so pleased with my first one I ordered more.

by: Steve07/27/2018

Excellent service when I ordered the part and I am very pleased with the product.

by: luis02/09/2015

I used it for a Land Rover and it fits perfectly.
Thank you

by: Dana Corkern02/11/2015

Great items and fast shipping! What more could you ask for???

by: 03/22/2021

by: William P04/14/2019

Product as described and a quick ship.

by: Dennis F07/10/2015

very nice very quick shipping

by: MeaganL12/23/2016

Great product, super fast shipping! :)

by: lanny03/17/2015

fast delivery


Customers compare CR79150 to these similar products

Do you have a question about this Accessories and Part?