Menu Icon


Hopkins Endurance 7-Way Trailer Connector Socket - Vehicle End - Ergonomic Design




Code: HM48480


82 reviews

Our Price: $12.20


Quantity: 


Product Specs:

Wiring

Trailer Connectors

Vehicle End Connector


Plug Only

7 Blade

Hopkins


This heavy-duty trailer connector socket has an outlet for a 7-way plug. A weatherproof, insulated lid covers the terminals. The cover is also easy to open and extra-durable.

Video of Hopkins Endurance 7-Way Trailer Connector Socket - Vehicle End - Ergonomic Design


Customer Reviews

Hopkins Endurance 7-Way Trailer Connector Socket - Vehicle End - Ergonomic Design - HM48480

Average Customer Rating:  4.8 out of 5 stars   (82 Customer Reviews)

This heavy-duty trailer connector socket has an outlet for a 7-way plug. A weatherproof, insulated lid covers the terminals. The cover is also easy to open and extra-durable.

- HM48480

by: Mike B09/14/2017


I bought this socket for my 2006 Volvo Xc90 to wire in the 4-Pole harness I also purchased from etrailer. Already had a few 7 Blade to 4-Pole adapters from my previous vehicle, and wanted the option of adding a trailer brake wire for a small camper later on so that was the main reason for the purchase. It also went very well with the Hidden Hitch I had already installed, bracket mounted right up to the existing tabs on the hitch. Super quick and easy install, as all of my etrailer purchases have been. Looks great on the truck, and functions great with the 180 Degree cover. 432535



- HM48480

by: Brian M10/08/2013


etrailer gave excellent service. Shipping was prompt. Email followup was excellent. I needed a part to hook up to a Silverado 3500 with the wires to the bed already there (taped up at the front of the bed on the driver side) and didn't want to tap into the existing plug on the bumper. The L Shaped bracket is easily detachable so that the plug can be screwed directly into the sheet metal of the truck bed once a hole is cut. However 2 things....the unit comes with nuts and bolts so get ready for a trip to Home Depot to get some sheet metal screws of some sort for most installs in the bed. Second, the holes that the screws must go in are hex shaped which is great for the bolts that come with the unit but not for sheet metal screws so be sure and get screws with a small enough head to countersink into the holes or with a big enough base so as not to sink into the hex shaped holes. 103078



- HM48480

by: Kent Drummond07/24/2016


I purchased this 7 blade connector to replace part 47435 (6 pole round to 7 blade (trailer)), which was allowing the whole cable assembly to droop close to the ground, and was fatiguing after four years of use. This new unit was easy to wire and install, however I wish to point out that the molded markings for the various wires (RT, LT, TM, GD, BR, etc.) are exactly backwards from the way the device is supposed to be wired. This was evident when I finished the installation and observed the turn signals were reversed, and nothing else worked (as a result of blown fuses). Once I corrected the wiring, everything works fine. Use the wiring diagram which comes with the instructions and not the molded pin markings on the device. 275789


Comments

Thanks for the follow up. Thats impressive :- The two products are holding up fine. With respect to the Hopkins Endurance 7-Way Trailer Connector Socket - Vehicle End - Ergonomic Design, its working just fine, although the bracket is a little bent from being dragged on the ground when the back bumper on my KIA gets a little too close. Ive had to reinforce the mounting, because the fiberglass bumper isnt strong enough to take the hits. My problem, not yours. I will note, however, that the blades in the connector dont grip the slots in the trailer portion very well, so if I dont have the trailer part totally ed where the little latch in the top of the gate holds, the connecter easily falls out. As for the six pin to seven blade adaptor, everything is fine.

Kent D - 01/06/2018

32680

- HM48480

by: Charlie M.05/15/2014


very easy to install. Nice heavy duty piece. using on a stacker trailer we have at the shop that uses a pig tail with female 7 way plugs on both ends. works well for us. great service and fast shipping! Thanks! 130812


Comments

STILL WORKING GREAT!

Charlie M - 05/15/2015

11709

- HM48480

by: Larry12/06/2011


I installed this receptacle in the side, top rail of my truck to supply power to my 5th wheel trailer. The connectors at the rear are very sturdy, I was able to tighten the connections very tight without fear of them stripping out. Looks like a factory installation! 27853



- HM48480

by: Vic01/16/2013


Good quality with seal on cover. Wiring installation was a little tight with the housing. It did mount perfectly with my Draw-tite hitch. 63295



- HM48480

by: Peter V04/20/2015


Great product, shipped promptly. The video on etrailer.com made installation a breeze. Even comes with non-corroding grease for terminal connections. I got stuck as an amateur wire-installer and had to call etrailer.com for some technical advice (didnt have a purple wire or orange wire as all wiring diagrams online showed....) the tech support was super knowledgeable and got me running in no time! 186563



- HM48480

by: Josh W04/22/2017


Very easy to install. Good quality, looks like it will hold up over time. I ran my 4 pin right next to it for a clean look. And as always great customer service. 371062


Comments

Josh W., Hopkins is pleased that the HM48480 Connector met your needs and you had a great experience with etrailer customer service.

Hopkins C from - 04/26/2017

23363

- HM48480

by: Steve in Central PA07/11/2013


Easy to wire in. Seems that it will be pretty durable. Instructions were good and included a wiring diagram. Only improvement I can offer is that the wiring stamps (ie. LT, RT, GND, AUX, etc) were not readable once you loosened the wire clamps. It would have been much more convenient if the stamps were visible once I loosened the clamps to put the wires in. 88907



- HM48480

by: Paul R10/03/2016


Product delivered very quickly even here in Alaska. Had the same item installed on my truck and it had a broken cover plate so needed to replace it. Also found the original was not installed very well and let water into area where wires were terminated. Fixed that problem with the better weather sealing. Thanks for great service and a good product. 303023



- HM48480

by: Robert12/29/2017


This is just what you need to fix a completely trashed factory receptacle, in our case, on a Toyota Tacoma. I had to flatten the mounting bracket because I couldn't remove the stock bracket (rusted bolt), but that was easy as long as you have a drill to open up the holes for the receptacle to attach to the bracket. 463593



- HM48480

by: Jason01/30/2013


Controller is very nice and installed easily. All mounting hardware was as stated and went in with no hitches. Very informed salesman and great to deal with. I would recommend them or do business with them in the future. Also shipping was very quick. 64633



- HM48480

by: Mike S.07/15/2013


Great value. Toyota wanted $235 for the replacement which included an 18" wiring harness with a Weatherpack connector. I cut the Toyota harness at the failed socket and attached the wires to the new socket as shown in diagram. 89557



- HM48480

by: Kevin M04/18/2017


Product looked robust right out of the box. Took about 5 ministers to install. Works great. The service during the sale and after the sale was incredible I would recommend etrailer to anyone who has a trailer or vehicle needs. 369108


Comments

Thanks Kevin M for writing such a great review and rating!! I am surprised it took 5 ministers to install but Ill bet it went on quick. Just kidding Kevin, I knew you meant 5 minutes but the way it came out gave me a laugh. Happy towing!!

Hopkins C from - 04/25/2017

23341

- HM48480

by: Brandon03/10/2013


Came with nice set of installation instructions and wiring diagrams. Also came with installation bracket and bolts for mounting, dielectric grease packets, and rear cover to help seal up connections. Well made product. 69849



- HM48480

by: Thomas K.03/16/2017


PART IS STILL ON MY TRUCK AND WORKING PROPERLY. NO PROBLEMS WITH PART OR INSTALLATION. SHIPPING WAS ON TIME AND WAS IN PERFECT CONDITION. LOOK FORWARD TO DOING BUSINESS AGAIN IN THE FUTURE. THANK YOU , THOMAS 353377



- HM48480

by: Mark L11/05/2015


Best feature I think is the ability to service it. One clamp screw (#2 Phillips) and a flat screw driver to pry easily accessible tabs, slide the sleeve back and you have full access to all screw connections. 231441



- HM48480

by: Jeff06/11/2013


Great product. The labeling on each connection really makes it easy to install. seems rugged enough, but I would still be careful where it is mounted so rocks/dust/water don't damage the casing or wiring. 84077



- HM48480

by: Tim P.04/08/2011


Gasketed cover. Comes with the mounting bracket. Nice latching cover at the rear to cover all wire terminations. Also includes plenty of dielectric grease. Terrific experience dealing with etrailers! 11343



- HM48480

by: Greg H.10/15/2017


I have not put the product to use yet, but the quality exceeds what I had ordered and returned from another source. The shipment time was even better than stated when ordering. 442794



- HM48480

by: Philip02/18/2013


Great product-our orders from E-Trailer always ship fast and accurate! Very handy resource. The website is also easy to navigate and find parts. That is why I buy here. 66753



- HM48480

by: PC09/16/2016


My factory connector cracked. I installed a Hopkins plug on our trailer several months before, so I purchased the connector. It is a great product and easy to install. 296933



- HM48480

by: Nicky-D05/28/2014


Excellent product for the price. ETRAILER had excellent communication throughout the delivery process. I would use them again for additional purchases in the future. 132981



- HM48480

by: J.GORDON03/07/2017


E-Trailer is the one stop shop for everything RV-ing. Easy to order, just what I needed at a great price and delivery was quick — right on time! I love e-Trailer!! 349661



- HM48480

by: Ray G.11/03/2016


Purchased a boat that had the male connector that required this type of connector. It was easy to install and has worked perfectly for the last year. 313324



- HM48480

by: Brent05/11/2011


Vast improvement over the old basic truck side connector this product replaced. Much more heavy duty spring closure and very easy wiring instructions. 13315



- HM48480

by: Terry08/14/2014


I am not much of a creative writer, so I will make this short. Service, shipping, follow-up emails all excellent. Product just what I ordered. 146714



- HM48480

by: kc05/05/2014


Hi ...The wires on the H20042 are not color coded IAW standard color codes. I had issues, then I went back a viewed your video. 129020



- HM48480

by: Carl S03/15/2012


Better than I expected. Very high quality compared to items in local stores and shops. Great service and unbelievable delivery time 33975



- HM48480

by: no name02/12/2013


For the money, this connector seems to be a good deal. It is well made and appears to have a good water repellent seal. 65918



- HM48480

by: JL10/06/2016


This piece worked very good for me. It included all the screws and even the bracket at a great price. Very happy! 303945



- HM48480

by: Les M02/23/2017


Good item, uses small bolts or screws as plastic inserts are not strong enough to handle force used to unplug cord 345074



- HM48480

by: David B.04/26/2013


This receptical is exactly what I needed to build my custom towing connections since it wasn't factory prewired. 78061



- HM48480

by: Tristan E.07/30/2013


Quick and easy install owing to the organized and clear instructions offered through the site. Thanks! 92354



- HM48480

by: BB07/28/2012


Better quality and easier installation than some of the other trailer connectors that I have installed. 49682



- HM48480

by: Mike05/06/2015


Easy install. I buy from etrailer because of their prices and service videos! Thanks etrailer. 190762



- HM48480

by: k en j05/16/2014


I shopped, I bought, I received, I installed. I'm as happy as a tornado in a trailer park! KEN 131033



- HM48480

by: Jeff H.01/01/2017


Very nice heavy duty plug, and simple connector style makes wiring it in a breeze. 329296



- HM48480

by: Tim W.06/23/2016


Mounted and wired in minutes. Seems to be good quality, good solid connection. 264211



- HM48480

by: Randy11/13/2017


I really like this plug, it's built well and was easy to install! Thanks 451620



- HM48480

by: Big D03/06/2012


Exactly what i wanted and for less than half the price of my local store 33176



- HM48480

by: Jeep1XJ01/20/2017


Durable. Strong. Good quality replacement. Thank You eTrailer, again. 334092



- HM48480

by: Mike04/30/2013


product is well designed and well made. better than others out there. 78506



- HM48480

by: Adam P02/03/2017


After a year of medium use installed in the truck bed, no issues. 338501



- HM48480

by: Roger12/27/2012


Heavy duty receptacle-the included bracket was a selling for me. 62061



- HM48480

by: Tom07/13/2017


Worked well with the extended wireing connector I purchased. 405259


Comments

Tom, Hopkins appreciates your business and is grateful you purchased our Trailer Connector Socket. The Endurance™ Professional Grade products are designed with maximum durability, enhanced weatherproofing and superior ergonomics backed by industry leading 3 year Warranty. If you have any concerns or questions, please get in contact with etrailer customer service.

Hopkins C from - 07/17/2017

26191

- HM48480

by: Clark S02/18/2015


Great quality, fast delivery, great price...Thanks etrailer! 175248



- HM48480

by: Ken N.09/27/2016


7 pin receptacle mounted fine in the bumper and works fine. 300717



- HM48480

by: john .r03/04/2015


havnt installed yet but look heavy duty enough for my needs 177032



- HM48480

by: Larry01/29/2013


Good kit, even includes silicon grease to keep water out. 64482


Show More Reviews
87
87


Customers compare HM48480 to these similar products




Do you have a question about this Wiring?

VS

Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps




Code: C57674


174 reviews

Our Price: $34.65


Quantity: 


Product Specs:

Wiring

Wiring Adapters

Multi-Function Adapter

7 Blade
4 Flat


Plug and Lead

4 Flat

Curt


This multi-function, vehicle-end connector converts any 4-way flat, vehicle-end plug to a combination 7-way outlet and 4-pole flat outlet.

Video of Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps


Customer Reviews

Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps - C57674

Average Customer Rating:  4.7 out of 5 stars   (174 Customer Reviews)

This multi-function, vehicle-end connector converts any 4-way flat, vehicle-end plug to a combination 7-way outlet and 4-pole flat outlet.

- C57674

by: Dan S.06/16/2014


Great product I used this to convert my 4-way harness to a 7-way + 4-way harness on my 2011 Toyota Sienna. Everything went really well. The only very small complaint I had about this product is the length of the white ground wire. It was too short to reach a good grounding point on the frame so I had to go buy some extra wire and connectors to extend it. Make that cable about 3 ft longer, and just provide the ring terminal and this would be a perfect product. Installing it makes me want to splurge on a tow controller and charge line... 135750


Comments

HiI have a toyota sienna 2011 and i want to tow a pop-up camper. Mine has a towing package. The camper is around 2400 lb. in your case do you think a brake controller is necesary?can you tell me What kind of cable do u buy to extend the white ground cable?Di d u buy the no drill tie bracket?

-- comment by: Aldo - 06/27/2014

5189
Comments

Aldo. We towed a popup trailer that was little less than that loaded weight without any issue. This was a one time rental for us. We towed up over Vail Pass in Colorado without any issue at all. The engine and transmission on the Sienna could tow a lot more weight, it is limited due to the suspensiontire rating.The only problem we faced is that when hitched we couldnt open the rear door of the sienna due to the trailer jack on the tongue of the trailer.If I was to tow regularly I would invest in a break controller, charge line, and a Weight Distributing Hitch. The main limitation in towing with a sienna is the hitch weight.No I didnt buy the tie bracket. The hitch I purchased 75696 had a built in bracket that this fit on perfectly just had to get a few screws/nuts for it.I just bought some 12 guauge auto wire at autozone.

-- comment by: Daniel S - 06/30/2014

5220

- C57674

by: Chris H.05/18/2013


I really liked the idea of having the LEDs to let me know if I was having any problems with the wiring harness, but I did find a problem with it. I installed the wiring harness myself, using the instructions on the website, but after connecting everything I realized that the LED for 12v power is always on. It is not switched by the key, so although an LED should have low draw, this might not be a good idea on a work truck that stays parked for long stretches. 80885


Comments

I am still very happy with this adaptor, but I did put back in the plug on my brake controller so I could unplug it when the trailer was not connected, the brake light was on, and I disconnected the continuous 12v. Also, make sure your 4 wire connector is clean or you might have dim lights. Although the LEDs are useful, I found a plug in tester to be more accurate because of the false brake signal I was getting.

Chris H - 05/19/2014

4322

- C57674

by: Bill H.12/04/2016


I installed this 4 to 7pin adapter with the T-one harness 118449 and the Drawtite hitch on my 2016 Toyota Highlander. I think the install was 1st rate. This adapter allows me to connect either a 4 pin or 7 pin plug. Nice. Very simple to check out the installation with the test lights. Adapter looks rugged and well made. The 4 pin receptacle that slides into the bracket should have better retention though. Also I provided a picture of the 4 wire cable from the car harness to the adapter as it exits the storage compartment. I removed the grommet/seal. Made an X cut in the center. Forced the cable through it. Made a waterproof seal with RTV. 322171



- C57674

by: Norm M.04/30/2013


My new Curt 4 pole to 7 pole and 4 pole adapter (C57674) with test lamps is a quality addition to compliment my Curt class III hitch. Attaching it to my '01 Blazer went smoothly, and testing to see that it was wired properly was a snap with the built in test lamps. 78432


Comments

No trouble installing. Works perfectly, except the 4 wire connector likes to come adrift, I like it very much even with that little glitch !

Norm M - 04/30/2014

3864

- C57674

by: Steve C.06/29/2015


The adapter was easy to install and works great. I really like the LED status indicators on the socket. I had the voltmeter out but didn't have to use it. 208015


Comments

Ive used the wiring harness with the 7 pin connector for your camper and it is still working great. I have borrowed a friends cargo trailer and use the 4 pin connect. It is nice not having to use an adapter.

Steve C - 06/28/2016

19001

- C57674

by: Eddy03/05/2013


Great product! Sturdy and weather-proof connections and wires! Easily installed. Thanks Curt and etrailer.com for an awesome item! 68991



- C57674

by: Richard Collette06/02/2013


The bracket was too wide for the OEM hitch and cover on a 2013 Highlander (see photo). I had to grind down part of the the bracket so it would clear the plastic cover. The top two mounting screws did not line up. I had to elongate one of the holes. The 4 pin connector merely slides into the side of the bracket, rather than fitting in like a grommet, so I'll bet it comes out one day. The wiring on the back of the 4 pin connector is visible when looking at the side of the bracket, making for a less than clean look. 82915



- C57674

by: Chris C.06/04/2014


2013 Dodge Durango Looks great. Nice and clean installation. 134266



- C57674

by: Gene02/16/2018


I bought this for a 2013 F-150 with the Tow package. I had to install the OEM brake controller and the class 4 hitch as well as the 4 to 7 adapter . The etrailer videos convinced me that I (shade tree mechanic) could do this. I was going to give this a 4 star rating because no instructions came with the package and the color of the wires did not match the YouTube example. I had no idea what wire was which:) then the review popped up in my email and the PDF with instructions was attached. This went in easy peasy . In hindsight I could have just looked it up rather then complain about the lack of attached instructions. I feel like such a millennial. 476205



- C57674

by: Charkeyes10/06/2014


Product is good if you are using it on a "full size vehicle". Using it for connecting to my Scion xB, was not at all what I expected or wanted. Sadly, Curt Mfg. does not have what I thought this one would do. This 4 pin connection to 4 pin and 7 pin adapter with test lights as pictured is very deceiving. Mount bracket is slotted for holding the 4 pin connection on the left side, it does not hold the connector in place securely. Wiring harness is a lot heavier and bulky, it dupicates the wiring, a pigtail to the 7 pin connector via a splicing system of wires and has an additional pigtail going separately to the 4pin connector on the mount. 154804



- C57674

by: Lawrence L08/16/2017


I recently had a receiver hitch installed on my 89 Silverado and the wiring was merely zip tied to the safety chain connection. Well that didn't sit well with me. I wanted a more permanent wiring connection point. So I purchased your 4 flat to 4 flat and 7 way plug and installed it. So far so good. The installation turned out perfect and it looks good. The test lights are a great thing as well. I couldn't be happier. 420882



- C57674

by: DWP02/21/2014


All connections worked first time. I did have to extend the white wire to make the ground connection to the frame. What I really liked was the way this adapter plugs into the tail lighting wiring. The only thing missing from this device was a stainless steel clamp. I had to use two small ones to make the attachment to the hitch. I also cut a small slot in the center of the mounting bracket to secure to the hitch. I had to move the mounting a little farther left to clear the spare tire when removing it. Still a great value for the money and the test lights worked good. 117102



- C57674

by: Jason A02/21/2017


I bought this for my '68 GMC 3/4 ton, which is in really nice shape so I wanted a clean install. The hitch was pretty easy to fit - I had to drill holes in the frame but I knew that going in. I especially liked the built-in bracket for mounting the trailer plug, worked great with a Curt combo 7 pin / 4 pin adapter from eTrailer. Good product, great seller. 346974



- C57674

by: David09/07/2017


Because of some overestimation of my own narrow skill set, and an equal overestimation of the electronics on my towing vehicle, I ended up having this professionally installed. Works great, and I would order this item again in a heart beat. I'm also terribly amused when I press the lock/unlock button on my key fob and the red LED lights fire off on the wiring harness. Makes me laugh every time. When I purchased this item, etrailer went of their way to email me with links, suggestions, videos, and images. Excellent support, and thank you. 429770



- C57674

by: Johnny11/17/2017


Great customer service on-time delivery super fast shipping product was just as described works well and just what I was looking for. 452971



- C57674

by: Ralph C.09/19/2017


Installed and have camped for one season using this 7-pin connector. Works great. I did make one mistake, I didn't add a relay to break the aux power connection when my vehicle is not running so the aux power LED is always lit. Got a number of comments about that this season. Might have to add a relay... 434040



- C57674

by: Tom H12/20/2013


Very rugged little item. I'm really glad I chose to buy two of these. My former 4 way flat had the test lights built in and this one does too. Every thing about this seems very well built. Probably made in America... or it seems like it if not. But it's not just the product that makes this nice. It's etrailer staff. They patiently took time to explain a number of things to me when I bought these and a Tekonsha brake controller. I don't even look anywhere else if I need anything. 110648



- C57674

by: Bob semrow08/01/2017


The product was great but as I read in some other review the power wire was too short and required a splice but other than that was exactly what I needed and exactly as portrayed in your video. Delivery wasn't the best...... started out from MO by UPS and was moving along nicely till it reached MT then somehow the postal service got involved and delivery was three days longer ..... and the UPS truck still went by! But, thats no reflection on you guys, you're great. 413781



- C57674

by: Norm10/23/2016


This is my second order of this trailer light hookup. This is the end that goes on your truck I was so impressed with the one I ordered for my RV, that I ordered another one for my truck. This is so easy to hookup. The bonuses are that it has a four-way on the side for older trailers and it has lights to help troubleshoot when a trailer is not wired correctly or has a loose wire. I cannot think of a better hookup, and I searched the stores for just this style. 309874



- C57674

by: Pokey5807/03/2017


This is the second vehicle I have installed this adapter on. We tow a Coleman popup and another smaller trailer so we need both the 4-pin and 7-pin adapters. The test lamps are great to confirm that you have installed the wiring correctly. 401368



- C57674

by: Steve Kady04/18/2017


I called and spoke with Yvvone about a hitch a its wiring. This lady knows her stuff. I had several questions, especially about the wiring and she was very quick in answering each one of them. She took my order and it arrived 3 days later. The customer service in this company is absolutely fantastic. They have quality products and they are priced right. It is a pleasure doing business with folks such as Yvvone and etrailer.com 369366



- C57674

by: Dave W07/20/2016


The directions were clear and the adapter performed well the first time I hooked it up. I am extremely happy with the product as well as the vast amount of resources provided by eTrailer that make self-installation by a novice such as myself less painful. It is now one year later and I recently had a wiring issue with my trailer and the built-in diagnostic lights saved a lot of extra steps in diagnosis. 274205


Comments

Great! No problems! Glad I got it from etrailer.com

David W - 07/21/2017

26439

- C57674

by: Adam01/31/2013


I need the ability to pull trailers with both 4 Pole and 7 Pole connections and this adapter did the trick. It's heavy duty and I think the extra few bucks for the Test Lamps was well worth it. 64739



- C57674

by: Chris04/28/2014


Absolutely love this adapter. I've used other ones in the past. What sets this one apart is the indicator lights of the 7-pin. It's great that you don't have to plug in a trailer to verify electrical connections are all correct, as well as, it helps in troubleshooting whether there is a problem with the vehicle or the trailer wiring. Highly recommend this! It's worth the extra couple bucks. 127684



- C57674

by: Daniel10/22/2016


Great product for a great price, it's worth mentioning though that the 7 blade and 4 blade conections don't mount side by side unless you use the supplied bracket, mounting it through a flat spot on the bumper Wil leave the 4 pin connector hanging behind where you still have to crawl underneath to hook up a small trailer. But the LED lights are absolutely awesome to have and have labled. 309755


Comments

Still works great, and the led lights are still the best feature

Daniel - 10/22/2017

29674

- C57674

by: Kyle T.07/31/2016


Pretty good adapter. Works great and looks good. Only complaint is that you have to figure out how to mount it to the vehicle by yourself but is understandable since not all vehicles will have the same attachment points. I installed onto my Dodge Durango and I was able to bolt directly to the bumper with my own bolts. Great buy. 277933



- C57674

by: Shad03/02/2016


Haven't installed it yet but I like the selection this site has for various products. Placing an order was easy and shipping was fairly quick. I do wish that this product came with installation instructions or diagrams on paper. I like to have a hard copy when installing things. It is an easier reference for me. 239248



- C57674

by: TTom R.06/13/2017


This connector is easy to install with the instructions provided. I'm an electronics technician so maybe I have a little more skill than the average guy but I'm anyone with modest skill will do fine with this item. Especially since etrailer has provided very detailed installation instructions on You Tube. 392534



- C57674

by: YOGI12/23/2015


THE ADAPTER WORKED AS THEY SAID IT WOULD ON MY DODGE 2007 RAM 1500 JUST HAD TO TRIM OUT PLASTIC ON THE SIDE OF THEY HOLE IN THE FACTORY BUMPER AFTER THAT IT FIT LIKE A GLOVE BOLTED RIGHT IN BUT I DONT HAVE THE ELECTRIC BRAKE BOX YET TO HOOK UP THE OTHER WIRES JUST YET BUT I ASSUME IT WILL WORK AS EXSPECTED 234108



- C57674

by: Jeffrey12/30/2017


etrailer has become my go to supplier for trailer parts and vehicle accessories. Great prices, accurate product descriptions and easy to navigate site! All products purchased have been of excellent quality and delivered promptly...well done! If you only want to do a job one time, quality pays .... 463827



- C57674

by: Mike B05/01/2012


The fit was perfect, did not require any modification to the unit or my vehicle. Took approximately 30 minutes, mainly because I was taking my time to make it look nice and I was using heat shrink connections. etrailer was outstanding in their support - as usual - and I received my package quickly. 38887



- C57674

by: Jeff02/24/2013


Thank you so much for solving a wiring issue between a very old horse trailer and my tacoma pickup. Starting from the first phone call to the delivery of a part that fit perfect! Knowledgable staff, quick delivery and a good product. In a world filled with underachievement. I will say well done. 67619



- C57674

by: Bronco07/30/2014


This connector appears well made. How durable it is during cold weather, time will tell. After applying dielectric grease, I used two tie wraps to hold connectors together in order to keep ice/snow from pulling them apart. A longer ground wire would be nice. Using the setup for a camper. 143643



- C57674

by: Tony S.02/14/2014


Ordered this along with a receiver for my 1990 Chevy truck. Drilled two holes in my bumper for the mount . have to use your own screws for the mounting bracket to the frame the rest are supplied. Wiring instructions found on Etrailer if you need them. Great product! Thanks Etrailer! 116591



- C57674

by: Access Const.03/17/2011


2nd time purchasing from E-trailer, 1st time for this product, Pic shows 4 way attached to unit on left, does not come that way. 4 way is loose on the pig tail with a cap and slides into the meatl bracket. I see this will be a problem without securing it to the bracket better. 9584



- C57674

by: Bill B08/11/2017


The video that you have was excellent in the installation, the harness worked as described. Could have had more written instructions for the wiring for the splicing of the rear harness, if not for the video would not have known exactly what to do. But it worked well.. 419214



- C57674

by: Wpeterson07/18/2017


Customer service was awesome. I had no idea what anything was called...I'd never done this before...and they talked me through everything. The parts and directions were excellent. I really loved the install videos. ETrailer saved me money...$500 less than a dealer! 407864



- C57674

by: BLS01/21/2013


Very nice multi function adapter. The led indicator lights are very handy. Construction is of high quality. 63671


Comments

Is the indicator light supposed to always stay on even when the car is turned off? My 12v indicator lights up red all the time even when I turn the car off.

-- comment by: Blake - 01/23/2013

894

If your 12V feed is wired so that it is hot all the time, then the 12V feed LED indicator will be on all the time. These are LEDs so the amperage draw is very small.

-- Patrick B - 2/4/2013


- C57674

by: Dave P.10/20/2016


It works but the 4 pin connector is not secured in the bracket. There is nothing to keep it there. I had to use cable zip ties to mount it. If they had made the bracket wider and punched a hole for the connector, would have been the right way. 308925



- C57674

by: Michael Mower11/29/2012


This hitch electronic adapter is exactly what I needed for my Toyota FJ Cruiser which cam with a factory installed class III 2" rear hitch and the 4 pole connector. THANK YOU ETrailer staff! Merry Merry Christmas 60235



- C57674

by: Karl02/06/2017


Excellent 339253



- C57674

by: Darin07/09/2012


Well built, shipped timely, easy install. Loved the test lamps, makes it very easy to confirm the wiring is and remains setup properly. 4 way flat adapter makes switching between one trailer to another a snap. 47198



- C57674

by: shane c03/29/2017


Just got all the parts i ordered will be installing soon arrived undamaged and packaged well everything is in great shape and better quality now to install hitch and brake controller and rv plug 362691



- C57674

by: Bruce C10/07/2016


High quality product with handy test lights on the unit. Makes it possible to use a 7 pin trailer on a 4 pin vehicle for light loads. Has wiring to add trailer brake system later if needed. 304324



- C57674

by: Kelvin A.10/09/2013


I was hoping that the flat plug was mounted to the harness and not the bracket. In my case, i do not need the bracket and have to find a way to mount the flat plug in order to use it properly 103221



- C57674

by: W.C.U.06/20/2016


Easy, straight forward installation. Flawless performance. What's not to like? Money well-spent. I would never hesitate to recommend i/t to a friend or install it on another of my vehicles. 262691



- C57674

by: Matt B03/25/2016


Great product overall, exactly what i was looking for. Would have been nice if they included the hardware for the bracket that mounts to your vehicle though. Very easy to mount and plug in. 241668



- C57674

by: Norman C08/03/2014


Products works great as advertised. The resources on the web site are also a huge advantage to getting it installed. All things considered I would recommend anyone to etrailer. Thanks. 144135



- C57674

by: Jadon W01/12/2017


Install was simple and easy on my Durango. I like the lights telling me what is working or not. wish the ground wire was longer maybe 2ft. I had to splice and run extra wire to a ground. 332044



- C57674

by: BOB C.11/05/2016


STURDY, WELL MADE, FUNCTIONS AS ADVERTISED.... QUICK CONVERSION FROM THE 4 FLAT ON MY TRUCK TO A SEVEN BLADE RECEPTACLE... THE SPARE WIRES I WILL USE FOR TRAILER BRAKES AT A LATER TIME. 314078


Show More Reviews
181
181


Customers compare C57674 to these similar products




Do you have a question about this Wiring?