Fifth Wheel Lube Plate for Reese Titan 16




Code: 83003


3 reviews

Retail:$69.09

Our Price: $38.17


Quantity: 


Product Specs:

Accessories and Parts

Fifth Wheel

Lube Plate


Reese


Video of Fifth Wheel Lube Plate for Reese Titan 16


Customer Reviews

Fifth Wheel Lube Plate for Reese Titan 16 - 83003

Average Customer Rating:  5.0 out of 5 stars   (3 Customer Reviews)


- 83003

by: John03/23/2015


Part arrived before the hitch it was to be mounted on. Drilling and assembly was quick and painless. 180341



- 83003

by: larry C08/25/2017


excellent all around,just like it always is with etrailer.com 424884



- 83003

by: Greg L.08/28/2016


works great 288704


3
3


Customers compare 83003 to these similar products




Do you have a question about this Accessories and Part?

VS

Reese 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package - 25,000 lbs




Code: RP30154


153 reviews

Retail:$618.42

Our Price: $338.10


Quantity: 


Product Specs:

Accessories and Parts

Fifth Wheel Installation Kit

Rail Adapter


Reese


Use your standard, above-bed 5th-wheel trailer hitch with your Ram factory, underbed 5th-wheel towing prep package. Adapter mounts in factory sockets and supplies mounting rails in your truck bed for attaching your hitch.

Video of Reese 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package - 25,000 lbs


Customer Reviews

Reese 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package - 25,000 lbs - RP30154

Average Customer Rating:  4.7 out of 5 stars   (153 Customer Reviews)

Use your standard, above-bed 5th-wheel trailer hitch with your Ram factory, underbed 5th-wheel towing prep package. Adapter mounts in factory sockets and supplies mounting rails in your truck bed for attaching your hitch.

- RP30154

by: Jim C.11/14/2013


Searched for a solution for mounting a PullRite Super-slide and this frame adapter did the trick. Installs quickly and is easily removed allowing full box utilization. It is identical to the factory optional adapter only hundreds less costly. Did require minor adjustment but instructions were clear and easy to do. Used with Industry standard Rail mounted hitches. 107315


Comments

So you were able to put a PullRite Super slide hitch on this adapter? I have a PullRite hitch it is not a super slide and it doesnt fit on this adapter.

-- comment by: Lindsey - 01/28/2014

2660

Certain PullRite hitches use a narrower spread than most. This rail adapter does not provide the most narrow slot set. If your hitch tabs are narrower than the slots on the adapter, I would bet that your PullRite is one of those models.

-- Patrick B - 2/5/2014

Comments

Fantastic. I have installed and removed the adapter frame several times. Im 70 years old and it was no bother for my wife and I to remove both the PullRite hitch and the adapter frame. I have ordered other products from E-trailer and all have done exactly what they described, They are an excellent resource and provide value as well as advise.

Jim C - 11/14/2014

7681

- RP30154

by: Mark Shaneor06/20/2017


WOW! very impressed! Some minor adjustments I did on the edge of the bed to remove the up and down movement. Put the hitch pins in and dropped in. I locked in place and it fit perfect. Next we dropped the Reese 16K fifth wheel with slide rails and bolted down. Thanks Kelsey! All the local places tried to tell me I had to have rails put in, but they were wrong, Thanks etrailer.com. I know where to go to get hitched!!! 396831



- RP30154

by: Mike B08/05/2014


Works as promised. Easy to install and remove. Will absolutely shop with Etrailer again. 144410



- RP30154

by: Dave E.10/21/2014


The Reese 5th wheel adapter fit very well. The only problem was getting the cotter pins out to make the snugness adjustment. The instructions could have been better. It took a while to realize that there were 2 different adjustments, not one. The one inch wrench is for the positioning (front-back, side to side) of the pins into the bed. No adjustment was necessary with this and I did not need the 1 inch wrench. However, the "T" was loose as the pins were set a little deep into the bed. Once (an hour later) I got the cotter pins out I screwed the T ends about 4 - half turns into the handle so that there was no vertical play. Then reinsert the cotter pins, set the Reese adapter back into the holes, give the handles a 1/2 turn and lock them into place with that snap lock. Reese needs to make it easier to get those pins out. The Pullrite 4409 baserail adapter fit perfectly onto the Reese RAM adapter, and then my old hitch fit perfectly onto the Pullrite adapter. (The only annoying thing is that I now have a hitch that is 7 inches higher than it used to be. But that is not Reese's fault. Darn those truck manufacturers. The trailer tongue can be moved up 2 inches to mitigate a little.) 157248



- RP30154

by: LeeJ06/28/2017


Item arrived very quickly as always from etrailer. Install was a little tedious, and not as easy as you would hope. After initially setting it down in the pucks, and locking the arms I had a lot of vertical play. So had to remove the cotter pins (not fun, or exactly easy to accomplish). Finally discovered that putting one tip of my needle nose pliers through the end of the pin, I had good leverage to pull/pry the pin. I did break one during removal, and had to hit the local farm supply store for a new one. fyi, Home Depot's were not thick enough. Another tip, after removing the pins you have to lift the adapter back out, and twist the foot part that locks into the pucks. It took several twists/attempts to get all four snug. I used some of the cardboard packing material to slide under the adapter to hold it up while making adjustments. Would have gone 5 stars, but the instructions are a little vague when it comes to explaining how to make adjustments. P.S. thank you to the reviewer who mentioned putting the bail pins in before setting it into the pucks, brilliant !! 399856



- RP30154

by: Bob M05/28/2014


What a great find ETRAILER.COM has been providing the exact part I needed at the best price around....ETRAILER customer communication was excellent from order confirmation to shipping to delivery follow up....I will definitely consider ETRAILER for my next purchase!.... 133111


Comments

Good well built REESEart....Easy to install and remove....Thanks Again ETRAILER for fast delivery!

Bob M - 05/29/2015

12183

- RP30154

by: Jay S.05/27/2015


Worked beautifully first time this past weekend with my Pro series 16k. Simple to install. The odd thing was that I had to turn the center locking pins upside down and have them in place just before dropping into the trucks peg holes. Otherwise the bed floor is to close on I was unable to close the pin properly. Once I figured this out, it was smooth sailing. Came just as easy. 198319


Comments

Still working great after a full year! Durable and strong and makes mounting the hitch easy and quick.

Jay S - 05/26/2016

17825

- RP30154

by: Farell C02/13/2016


Arrived as scheduled, UPS driver delivered Ram Oem Adapter For Above-bed 5th Wheel Hitches (RP30154) right to my 2016, 2500 4x4, RAM truck where I unpackaged & installed in less than an hour. Took me a few hours longer to place, attach and adjust the Reese 16K hitch to the proper height. The 4x4 height required the hitch to be lowered. Fantastic pre sales support aided in the proper selection & order at a reduced cost. 237768



- RP30154

by: Buddy02/25/2014


Fit good. Directions say to use bolts instead of pins if trailer is over certain weight. I have know idea how barely enough room for pins. No problems with etrailer though 117715


Comments

Thank you for asking. The products I purchased have worked great. No problems or complaints

Buddy - 03/23/2015

10267

- RP30154

by: Carl Evans07/27/2015


Had to make minor adjustments. All the cotter pins broke when removed, but was going to replace with new stainless pins anyway. Hooked up the 5th wheel and went for a test run of about 20 miles over various roads, to see if I needed to adjust the rail adapter pins. No adjustment needed so far. Pleased with the adapter so I can use my 20K hitch. Did notice the hitch has a very small amount of forward/reverse movement in the rail adapter. Am going to search for rubber bushings. I can hear it is the only reason I would like to limit the movement to zero. Very happy overall. Have done business w/etrailer before, and have no complaints. 214828


Comments

Did you ever find any rubber bushings to elimate the movement?

-- comment by: Brian - 10/28/2015

15718

- RP30154

by: Richard R03/02/2015


Have not used it yet, but very heavy duty, actually have trouble lifting it by myself. 176722


Comments

Works well, getting ready to install in the truck for this years camping season, but is hasnt got any lighter.

Richard R - 03/02/2016

16977

- RP30154

by: Chuck F.08/19/2014


Great product. Reese 5th wheel rail adapter for 2014 Ram with OEM 5th wheel prep package. Perfect fit out of the box. Great customer service. Kept me informed from ordering to delivery. 147449


Comments

Great

Chuck F - 08/19/2015

14418

- RP30154

by: Mike S.05/18/2015


This adapter for my RAM with the Towing Prep fit perfectly! I was originally concerned I'd have to make adjustments, but once I turned the locking handles, it was snug to the floor with no movement! HINT: Insert the locking Bail Pins into the holes in the rail before your final install! The install video shows the tech just dropping the Bail Pins into the hole. Not that smooth in real life. There is little to no space between the bottom of the rails and the truck bed. I couldn't snap the Bail pins unless I placed them in the hole first. Then just work the locking handles over the end of the bail pin ( the handles have some flexibility). Very happy with this adapter. 193998



- RP30154

by: Michael S.03/10/2017


I bought this for my new 2016 Ram 2500 that came with the 5th wheel prep package. In my opinion, it's the only way to go! It drops right into place, was very easy to adjust, and I had no trouble at all getting a nice, tight fit into the anchors in the truck frame. I use mine with a Curt slider mount with a Curt plate. Even though I have an 8 foot box, I like the extra room hooking/unhooking in some of the places I go to, and sliding rearward gives me so much more room to get to my landing gear. No problems at all with chucking/movement like I had in a lot of the solid mount setups I've had over the years. This drop in mount is GREAT! 350623



- RP30154

by: Kevin C.04/29/2014


I finally took delivery of my truck last Friday night, and got my Reese Picture frame adapter R-30154 installed. Here is a picture of the adapter only, and adapter with my hitch installed. Thanks for your assistance, sorry it took so long. 127922



- RP30154

by: glenn davis10/27/2013


awesome product 105327


Comments

Appears to be well made. Mine didnt come with instructions. I sheared off a cotter pin trying to lock one of the handles. Thats when I realized one of the corners needed adjusting.Personally, Im disappointed in the way it locks down. Once you bolt the hitch onto the adapter, you have to unbolt it EVERY TIME you need to remove it, because the hitch prevents you from turning the 4 handles! This is a pain when I want to use the gooseneck hitch, and I have to purchase new lock nuts each time.The Etrailer price was the best I found, and it only took a couple of days to arrive, once it was off of a 3 week backorder.

-- comment by: Rick F - 04/02/2014

3372

Thanks very much for taking the time to come back and share your thoughts. We will be sure and pass the input along to Reese.

-- Patrick B - 4/3/2014


- RP30154

by: Tim12/10/2014


I haven't picked it up yet, but I was amazed at the fast shipping & no hassles 164042


Comments

It was exactly as described. It fit,

Tim - 12/10/2015

16141

- RP30154

by: Kris B.01/27/2014


Appears to be very well made. Much cheaper price than the factory Ram part! 114862


Comments

Works great, no issues!

Kris B - 01/27/2015

8978

- RP30154

by: Ed S04/06/2015


The reese adapter came assembled and looked good. I had a slight bug getting it in my OEM slots as the front slots were 3/8" wider then the rear. Rears dropped right in. I called the original owner of the truck and he had the same issue... A little "persuasion" and it went right in. No fault on Reese, but RAM and their assembly guys in the old country... 183517



- RP30154

by: Robert Mares Jr06/10/2017


The product arrived a little banged up from the rough shipping & handling. All the parts were accounted for fortunately. With the help of the instructional video and instructions I was able to get it installed in a short period of time. Just a couple of adjustments and it was in! My Husky silver system fell right into place. Over all I was very pleased. 391585



- RP30154

by: Allan L11/30/2016


Received when promised.Box was badly damaged,but part was ok. Was disappointed to see it was made in China! The good news,was that it accually fit in the factory fifth wheel frame pockets with no binding.I had to adjust the grip fingers to remove the up and down play,and the clip pins are pretty close to bed floor,but everything else worked good. Titan hitch has slight bind when installing in knoches but it goes in.Hav'nt towed with yet,but it looks like should be ok.Only concern it sits very high in bed with reese slider setup. 321028



- RP30154

by: Bill H.01/03/2017


Product appears to do what it was intended to do. Like others have written, there are TWO adjustments you may or may not have to make. For me, it was kind of a pain to get the adapter pins adjusted where there was NO up & down play. Had to keep lifting adapter out, pull cotter pins, re-adjust pins a turn, then put back in. After 4-5 times of this on your hands & knees, you get tired quick. (weights 90 lbs) Never did get 100% of Vertical movement out. You will finally get to a point where you will say "that's close enough" 329508



- RP30154

by: Jeff L.03/07/2014


This frame is very stout and will do the job no question. The only thing is that it is heavy and not that easy to take in and out of the bed. I also found it will not work with my rubber bed mat. It would be nice if Reese made an all in one setup like on the Fords. The problem with the all in one setups available are that they are to tall, the B&W is over 17.5'' tall, I need it around 14'' to 15''. This frame and the Reese Pro together measures off my bed to the top plate 16''. 119789



- RP30154

by: Kevin R06/04/2015


Purchased Reese 5th Wheel Hitch Adapter for a Ram 3500 with 5th wheel prep. Easy to order, great service, delivered ahead of schedule. Installation instructions a little confusing, but went slow and had frame adjusted and locked in about 45 minutes. Rock solid connection, tows great. Really like the ability to easily remove at the end of camping season and have a clean, flush bed. I won't miss the permanent bed rails. Will buy from etrailer.com again. Thanks. 200356



- RP30154

by: John F.04/30/2017


I definitely had my doubts when I plugged it in to the factory mounts, installed my 5th wheel hitch and hooked it up to a 16,000 plus lb 5th wheel. Made many trips since and I'm convinced the Reese product you sold me handles the weight pull just fine. 374368



- RP30154

by: John L09/25/2016


I was a little worried when I got the package. The cardboard box had holes in the corners from shipping. The UPS driver knows me from years of shipments so he handed me a handful of bolts that he found on the floor of his truck. Luckily it was all of them. The unit fit the puck system without adjustment, and the fifth wheel hitch dropped right on. The unit has been a solid performer with no worries. It looks like new after a year of use. 299679



- RP30154

by: Fred CC.05/19/2016


Ram Oem adapter, 5-w 20k with rd tube s lider 250804



- RP30154

by: FredC02/03/2017


Box was damaged upon arrival, but the product was in perfect condition. Easy to install and setup, it has to be put in a certain position one set of hole are larger than the other so we had to turn it around for it to fit. Hitch attached easily and we will testing out the setup this weekend. Makes installation of a hitch easy without additional installation fees, easy enough for anyone to install and setup. 338282



- RP30154

by: Dick C.01/31/2016


The order came very quickly and was in good shape. Except, the cotter pins were missing. I had to use my own but they probably should be a hardened grade. Had to adjust the pin heights to get a tight fit. After all that it dropped in a fit good. FYI- the missing cotters are probably fault of Reese, not etrailer but maybe they should do an inspection before ship. Still will buy my truck/trailer stuff from them. 236679



- RP30154

by: Mike D06/29/2016


this hitch adaptor is truly AMAZING!!! very very easy install... i highly recommend this to anyone with a fifth wheel hitch that buys a Ram with the prep package.... u will not be disappointed... well worth every penny 266517



- RP30154

by: Mike M08/04/2017


This Reese unit arrived as promised. The package was substantial before being shipped. Enroute, it appears the shipper wasnt as careful. Found parts missing when the box was opened. Called etrailer immediately and they said the parts would be shipped out next day. Can't complain with customer service like that. etrailer has become my "go-to" source for all things related to my camper and tow vehicle. 414966



- RP30154

by: Mark S07/31/2016


Ram 2500 OEM hitch adapter installed within minutes. Nothing to put together. A must have when purchasing a newer Ram with OEM 5th wheel hitch installed. Shipping was free and fast. I will buy again from E-Trailer. 277911



- RP30154

by: Cess H.03/22/2017


We had difficulty turning in our 5the wheel trailer to get fixed due to not having the correct part to have the hitch installed. We ordered the hitch rail kit from Etrailer and we received it just on time even if we had the billing information incorrect the first time our credit card was used. Their staff was very helpful in helping you find the product that you need. Overall, highly recommend Etrailer.com! 356957



- RP30154

by: tony c02/25/2014


just what i was looking for. same as MOPAR piece but less expensive. packaging was inadaqute for shipping method. unfortunally because of weather and CHRYSLER Corp I can not try it in my vehicle. will post at a latter date as to actual install. service from etrailer was exceptional. ordered same part from MOPAR in Jan,2014 / still no delivery date. etrailer had it to me in less than a WEEK. thank you!!!! 117720



- RP30154

by: Mark Y04/06/2016


I ordered the adapter on Sunday, 3 April. Here it is Wednesday, 6 April and the adapter is here already. No room for any form of complaint there. Now, all I need is a truck to put it in. That is why I need a new adapter. I ordered the truck on Friday, and it will be 6 to 8 weeks before I get a chance to install it. With the available adjustments, that should not be a problem. Great service. 243122



- RP30154

by: Joe R.09/10/2017


Installed in my dodge 2500 2017. Fitment was perfect but had to adjust vertical and fore/aft play. Fairly easy just little time consuming. The only "but" I have is the videos show two different locking methods. One with two large pins and another with 4 smaller pins. No big deal all adjustments are the same but my locks with 4 small pins and my hardware bag had the two large pin. Good buy and fit. 430974



- RP30154

by: Herman S.01/29/2017


The frame worked as it is designed. The only problem, and it is not the fault of the frame, is that I have a 2016 Dodge Ram 2500 and the box is already high. With the added two or so inches of the frame it made my trailer tow more nose high. I know that if I had bought a hitch that fit the puck system I wouldn't have had this problem, but I already had a Pullright superglider hitch. 336645



- RP30154

by: Ty K.03/31/2016


works great. only thing I don't like is that to take the hitch out of the truck you have to take it apart. the locking bars wont rotate to the unlocking point with the hitch on top. 242467


Comments

Great

Ty K - 03/31/2017

23021

- RP30154

by: Don07/16/2015


Product was fine , minor tuning and the unit worked as describe. The only problem was the shipping. The box looked as if it had been somewhat trashed on the corners and the box staples were half open. Fortunately all parts were still in box. Damage to the unit consisted of a bent control arm, which I was able to repair with a little help of a couple of crescent wrenches. 212182



- RP30154

by: Dustin07/16/2015


I have a 2015 Ram 3500. This product did not properly fit right and took over 2 hours to get it "close" as Reese would say. The locking arms we're also in the wrong place. This product says that it can easily be put in. I'm a mechanic on the side and this was no easy project. Should have just bought oem. If time is money then this product cosy more than what it should. 212100



- RP30154

by: Gary08/16/2017


Installation was a headache. Hint, measure the depth from the truck bed to the underside of the puck first, that will give you a better idea for the pin adjustments. After doing that it went better. Having a second person to help is a good idea. Adjustments are kind of a pain, but it is what it is. Still easier than drilling holes in the frame and bolting on brackets. 421162



- RP30154

by: Brian C09/04/2014


Everything came in as described and in good condition. No hassles / No problems. That's what I like. 5th wheel tow prep package for Ram 3500 works great and makes a clean installation. Reese rail adapter was built heavy duty. The thing must weigh 50lbs. Way easier than drilling the bed! Wish more companies provided the level of information that these guys do. 150088



- RP30154

by: Roger07/30/2015


Awesome product, came 1 day earlier than expected. I read a reviews by others before I ordered adapter. It took me 15 minutes to make the adjustments, cotter pins were very easy to remove and reinstall. Installed my fifth wheel plate hooked up the trailer and went on a three day vacation. Thanks for the quick service. Would highly recommend company and the Reese adapter. 215459



- RP30154

by: Ping Pong05/17/2017


What a great product at a great price and it got here quick! I would have given it 5 stars if it hadn't taken a few too many tries to get each puck adjusted just right, but other than that the fit and design was right on, and cheaper than it's competator, I couldn't be happier. Definitely looking forward to shopping with you guys again in the future! Thanks ETRAILER! 381772



- RP30154

by: Danny Knight08/19/2014


Excellent product and great service. Took 5 minutes to install was adjusted perfectly. Just removed the pucks and dropped it in place. Worked great with my Husky 16K EZ roller hitch. Only thing I would recommend is that call takers have a little more information about the application of the product with other hitchs for the new Dodge below bed rail system. 147483



- RP30154

by: RP3015404/14/2014


Overall, an excellent product for a much less price than the OEM product. One minor issue of a hitch pin hole not quit lining up and had to be ground a slight bit but was not much. The product came assembled and fit perfectly when turning the locking pins. I'd recommend this product to everyone needing the 5th wheel hitch adapter for the Ram pickup. 124979



- RP30154

by: Dennis C.08/26/2015


Unbelievable "SERVICE"...I order the product for 25% less than anyone who even carries this product and most of all, including the dealership didn't even stock it...Hopefully in the future, if I need any other towing attachments for my 2015 Ram 2500....I hope I can at least have the opportunity to purchase it from you guys. Thanks... 221781



- RP30154

by: Scott Cummings04/16/2016


Just received the hitch, took about half an hour to make some adjustments. It dropped in with no problem. Real happy with it. Thankyou 245636



- RP30154

by: will c.03/23/2015


I received my Reese RP30154 hitch adapter a few days after ordering. I thought it would be a couple of weeks before it came. It's much heavier than I thought it would be and looks well built. I can't give it much of a review now, because the truck I ordered won't arrive until mid April. I will give a follow up after instalation. 180457



- RP30154

by: Irven C.06/19/2017


Product arrived as described and very quickly! Minor adjustments required for snugness so two people would probably be much easier to handle. I did it myself and it's a little heavy to align with the pucks in the bed to check for proper tightness. I'm pleased and I'm looking forward to trying it out this weekend! 396213


Show More Reviews
168
168


Customers compare RP30154 to these similar products




Do you have a question about this Accessories and Part?