bing tracking image

Best Nissan Xterra Cargo Carriers

change vehicle


Cargo Carriers Videos

Surco Hitch Cargo Carrier Review - 2013 Nissan Xterra

Today on our 2013 Nissan Xterra we'll be test fitting the 24x60 Cargo Carrier from Surco, part number 52018. To begin our test fit we'll slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and install our pin and clip. Now we'll go over some key measurements.We have 18 inches of ground clearance. The closest point of the carrier to the rear of the vehicle is 5-1/2 inches. We've added 31 inches to the overall length of our Nissan Xterra.



Rola Dart Folding Hitch Cargo Carrier Review - 2013 Nissan Xterra

Today on our 2013 Nissan Xterra we'll be test fitting the 23x56 Rola Dart Cargo Carrier for 2 Inch Hitches, part number 59550. To begin our test fit we'll slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and thread in our anti-rattle bolt tightening it with a wrench.Now we'll go over some key measurements. We have about 17-1/2 inches of ground clearance with the carrier in this position. The closest point of the carrier to the rear of our vehicle is about 4-1/2 inches. We've added 16 inches to the overall length of our Nissan Xterra.



Curt Folding Aluminum Cargo Carrier Review - 2013 Nissan Xterra

Today on our 2013 Nissan Xterra, we'll be test fitting the Curt 20 by 60 Folding Aluminum Cargo Carrier for 2 inch Hitches, Part Number C18100. To begin out test fit, we'll slide the shank of the carrier into the receiver to the hitch, line up the pin hole and install our pin and clip. Now, we'll go over some key measurements. We have 16 inches of ground clearance. The closest point of the carrier to the rear of our vehicle is about 3 inches and we've added 10 inches to the overall length of our Nissan Xterra. We'll pull the pin at the base of the carrier to allow out carrier to unfold.



Surco Hitch Cargo Carrier Review - 2012 Nissan Xterra

Today, on our 2012 Nissan Xterra, we'll be test fitting the Surco cargo carrier for two inch hitches, part number 52018. We'll begin our test fit by sliding the shank of the carrier into the receiver tube of the hitch, lining up the pin hole and installing our pin and clip. Now, we'll go over a few clearance measurements. We have about 17 inches of ground clearance. The closest point of the carrier to the rear of our Xterra is about five and a half inches. We've added about 31 inches to the overall length of our vehicle. The exhaust system on this vehicle exits on our passenger side and sits about 11 inches away from our loading platform. When opening our rear hatch, we see that the door breaks over the cargo carrier at about 16 inches.



Rola Dart Folding Hitch Cargo Carrier Review - 2012 Nissan Xterra

Today on our 2012 Nissan Xterra, well be test fitting the Rola Dart Cargo Carrier for 2 Hitches part number 59550. This carrier does fold so well be loading it in the folded position. Well slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and install our anti-rattle bolt, tightening it with a wrench. Now, well go over a few clearance measurement. We have about 16 1/2 of ground clearance.



MaxxTow Aluminum Hitch Cargo Carrier Review - 2012 Nissan Xterra

Today, on our 2012 Nissan Xterra, we'll be test fitting the Maxxtow Cargo Carrier for 2-Inch Hitches, part number MT70108. We'll begin our test fit by sliding the cargo carrier shank into the receiver tube of the hitch, lining up the pin hole, and installing our pin and clip. Now, we'll go over a few clearance measurements. We have about 16-1/2 inches of ground clearance. The closest point of the carrier to the rear of our Xterra is about 8-1/2 inches. We've added about 31 inches to the overall length of our Nissan Xterra.



MaxxTow Hitch Cargo Carrier Review - 2012 Nissan Xterra

Today, on our 2012 Nissan Xterra, we'll be test fitting the Maxxtow Cargo Carrier for 2-Inch Hitches, part number MT70107. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and clip. Now, we'll go over a few clearance measurements. We have about 16-1/2 inches of ground clearance. The closest point of the carrier to the rear of our Xterra is about 7 inches. We've added about 26 inches to the overall length of our Nissan Xterra. The exhaust system on this vehicle exits on the passenger's side and sits about 12 inches away from our loading platform.



Curt Folding Hitch Cargo Carrier Review - 2012 Nissan Xterra

Today, on our 2012 Nissan Xterra, we'll be test fitting the Curt Folding Cargo Carrier for 2-Inch Hitches, part number C18132. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and clip. With the carrier in this position, we'll go over a few clearance measurements. We have about 16-1/2 inches of ground clearance. The closest point of the carrier to the rear of our Xterra is about 2-1/2 inches. We've added about 14-1/2 inches to the overall length of our Nissan. We'll pull the pin and clip at the base of the carrier to allow it to unfold.



Curt Folding Hitch Cargo Carrier Review - 2012 Nissan Xterra

Today on our 2012 Nissan Xterra, we'll be test fitting the Curt Folding Cargo Carrier for 2-Inch Hitches, part number C18131. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and clip. Now, we'll go over a few measurements with the carrier in this position. We have a ground clearance of about 16 inches. The closest point of the carrier to the rear of our Xterra is about 3 inches, and we've added about 14 inches to the overall length of our Xterra. We'll pull the pin and clip at the base of the carrier and allow it to unfold. With the carrier in this position, we have a ground clearance of about 23 inches.



Curt Folding Aluminum Cargo Carrier Review - 2012 Nissan Xterra

Today, on our 2012 Nissan Xterra, we'll be test fitting the Curt Folding Cargo Carrier for 2-Inch Hitches, part number C18100. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and clip. With the carrier in this position, we'll go ahead and go over some clearance measurements. We have about 14-1/2 inches of ground clearance. The closest point of the carrier to the rear of our Xterra is about 3-1/2 inches. We've added about 10 inches to the overall length of our Nissan. We'll pull the pin and clip at the base of the carrier and allow it to unfold.



Curt Hitch Cargo Carrier Review - 2012 Nissan Xterra

Today on our 2012 Nissan Xterra, well be test fitting the Curt Cargo Carrier for 1-1/4 and 2 inch hitches, part number C18145. To begin our test fit, well slide the shank of our carrier into the receiver tube of our hitch. Line up the pin hole and install our anti-rattle bolt tightening it with a wrench. Now well go over a few clearance of measurements. We have a ground clearance of about 17 inches. The closest point of the carrier to the rear of our Xterra is about 6 inches.



Stromberg Carlson Hitch Cargo Carrier Review - 2001 Nissan Xterra

Today on our 2001 Nissan Xterra, we've got out the Stromberg Carlson Cargo Carrier here. It's been designed for use on 2-inch hitches and it's going to carry up to 500 pounds. Part number on it is CC-100. Now this carrier has a pretty nice open expanded steel, larger than you see on some of the carriers. It's going to allow for larger dirt and debris to fall down and out. Also offers a raised rail around the outside edge.



MaxxTow Hitch Cargo Carrier Review - 2001 Nissan Xterra

Today on our 2001 Nissan Xterra we've got out the Maxxtow Aluminum Cargo Carrier. We're going to test fit it and see what kind of spacing we have here with our vehicle. This is a aluminum slatted cargo carrier. We've got the big wide areas for dirt and debris to fall through and then our slats there to keep our load supported. It's got a small raised edge around the outside. It's going to be about 2 inches high. This is really compact as far as storage and things go like that.



Lets Go Aero Hitch Cargo Carrier Review - 2001 Nissan Xterra

Today on our 2001 Nissan Xterra we're test fitting the Let's Go Aero Gear Cage. Now this is a 32 by 48 cargo carrier. It's been designed for use on 2 inch hitches. It'll carry up to 300 pounds. The part number is HCR222. Now different than a lot of carriers, this one's gonna have a solid platform to it, or a solid floor.



Curt Hitch Cargo Carrier Review - 2001 Nissan Xterra

Today on our 2001 Nissan Xterra, we've got the Curt 20 by 60 folding cargo carrier and we're going to do a test fit on it. Now this cargo carrier has a nice kind of an expanded steel tight floor. It's got a medium hole size so you're going to get good support for smaller items but also room for dirt and debris to fall down and through. You can see the raised rail all the way around the outside it's about 5 1/2 inches tall. It's going to give us a good support for our gear that we've got loaded up and also you can see some good connection points for tie down straps. We've got a couple of reflectors on the sides and on the back.



Curt Hitch Cargo Carrier Review - 2001 Nissan Xterra

Today on our 2001 Nissan Xterra, we're test fitting the Curt 20" by 60" cargo carrier. This cargo carrier's for use with up to 500 pounds and it's been designed for use also with 2 inch hitches. Part number on it is C18150. This carrier is going to have a medium sized expanded steel floor on it. Gives you room for dirt and debris to fall down and through but it's also going to keep your cargo plenty secure even if it's smaller items. We've got a raised rail that's going to go all the way around the outside edge. It's about 5 1/2 inches tall.





Nissan Xterra Cargo Carriers Questions