# 1
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
These did not fit my 3500 lb axle. It has been very difficult determining the correct size U-Bolts for my axle. It appears etrailer does not carry the size I need.
It is exactly as described. It seems solid. I also ordered the springs, and they appear to be solid as well. I look forward to continuing to do business with etrailer due to quality parts AND great customer service from the likes of Shawnee and the crew. Thank you!!!
# 2
Dexter Trailer Springs Over-Under Conversion Kit
The lift worked out perfectly,I had the place where I bought the trailer install them because I didn't have a welder to weld the saddle mounts to the axle and that's a must for a safe installation,also I had the place where I bought the trailer do it because they had the capability to align the axle perfect to the trailer after the installation. The lift added approximately 5 inches to the trailer hight so I could install the off road wheels and tires.The lift didn't affect the handling of the trailer at all.
Jaime at ETrailer was extremely helpful and got my order sent up ups ground since I was having issues using a P.O. Box. My parts arrived quickly and fit perfectly. I installed them last week and my trailer looks so much better and won’t be scraping on my driveway anymore!
# 3
Dexter Trailer Springs Over-Under Conversion Kit
Our trailer was so low...that it could not make it up a low curb and some driveways - especially when fully loaded. Went with the Dexter axle flip kit. The Dexter bracket and base plate pieces are worth the extra $20-$30 compared to other similar kits - they make fitment easier, eliminate any guesswork on placement, and decrease installation time because of it. Took 2-3 relaxed pace hours for us to do single axle install. Tools required were ratchet/wrench set (13/16 deep socket worked for us for most of the bolts), cheater bar (for working those rusty bolts off), drill, angle grinder (cutter disc for oem u-bolts and leaf spring bolts that are rusted or welded in place, stripper disc for cleaning area around new bracket for welding) welder, floor jack and jack stands. We had to remove the leaf springs, as the wheel mount brackets would not fit through the openings. Was hoping we wouldn’t have to, but it was pretty simple to do. We jacked the trailer up. Removed the wheels. Removed the axle. Cleaned the axle area where new brackets go. Set the height and placement of the new Dexter brackets. We left the OEM brackets on the axle and placed the Dexter ones in the exact same position 180 degrees on the other side. Welded them on. Reinstalled leaf springs. Reinstalled axle, reinstalled wheels. Then voila! We added 6 full inches of height. Super awesome.
One order gets you the kit for only one axle, and realized this after my order arrived for my project on a two axle trailer. Seems obvious now but that wasn’t labeled & pictures were deceiving as I saw two axle trailers advertised. Hardware all seems to be in good shape but packaging quality is poor. Before opening my package I could see into my box with loose hardware rolling around. Thankfully no nuts fell out during shipping. In the future please tape around all seams or place in more secure packaging.
# 4
Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
Excellent service and quick delivery and great price, all looks good, thanks for helping me out with these items that I can't find around my area anymore,AES
Bushings quiet the trailer for a short period of time. Bushings wear out and squeaks return quicker than I expected.
# 5
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
During my yearly maintenance i found a issue with 1 of my spring equilizers and all of my bushings were worn out "got my moneys worth out of them" etrailer sent this kit and it only took me 2 hrs to install and get back on the road
The wet shackle kit was purchased for a Neo enclosed snowmobile trailer that worn out shackles and bolts in the suspension. Removal of the old hardware went fine and the clean up of the springs also. The assy of the new shackles and hardware was relatively easy. Initial greasing of the new wet shackle set up was difficult but ultimately I got all zerks to take grease except one of the pins in one of the shackle plates with two pins. A couple of 300 mile trips and all took grease easily except that one pin and it still will not take grease. Its almost as if there is not a hole for the grease to travel thru.
# 6
CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
Arrived well packed and as advertised. I'm going to pull the azle out of the boat trailer and wanted to have this 'on hand' should I break some of my U bolts. I've bought from you before - always been happy, thanks
Worked perfect for mounting a storage box to my boat trailer.
# 7
Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
Parts are a 5, delivery options questionable.Can't delivery 10 pounds of metal in a paper mailer. Was tore open on the bottom. I run a mailing business and I can tell you its not that much more expensive to use a box.
New bolts made replacement of springs easy
# 8
2" Square Trailer U-Bolt (Qty 2)
Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.
Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!
# 9
Replacement U-Bolt for 2" Wide, Square Axles - 1/2" Diameter - Zinc Plated
I ordered the ubolt kit for 2” square axle when i bought my new leaf springs. My old ubolts were 5 1/2”, the new ubolts were only 4 1/2”. Not long enough to use lock washer and thread bolt sufficiently. I had to order longer ubolts to make it work, only to find out 2 things. 1- the new longer ubolts do not include washers or nuts. 2- the 4 1/2” ubolts were fine thread while the new 5 1/4” are coarse thread, so i had to make the 6 mile trip to home depot to buy new coarse thread nuts. Why do you suggest a ubolt kit that doesn’t work with a 2” square axle and a 4 layer leaf spring
Product was adequate for my needs. Expected delivery was Thursday. ???? 2 1 1/2 mile trips on foot to the mailbox 2 days later and it arrived late today. Won’t be ordering items from you again. Your choice of transportation is horrible. UPS item will be delivered as scheduled. Saved a buck on the first shipment. Lost a customer! Pass this on to the idiot that decided to save a buck. Good bye!
# 10
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
This is a great kit! It included everything we needed to replace the old, worn-out brackets on our 6'x10' trailer. The directions were helpful and the brackets and hardware are nice and solid. We've had zero issues with the leaf springs (purchased on etrailer.com, also) or the brackets. Would definitely recommend!
Excellent, had everything I needed and more for my trailer. Everything fit well!
# 11
Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
These are the exact bolts used by the manufacturer of my trailer. I had a spring break after 10yrs use, so am replacing the springs and all the bolts at the same time, thank you to etrailer for the springs (ordered earlier) and now the bolts/nuts, all arrived quickly and accurately, you are my first choice for all trailer parts for my 7 trailers, thank you and keep up the good work!
When I ordered my kit from etrailer to replace the double-eye leaf springs on my 1970 Shasta Trailer, I decided to save a few bucks and get the bolts at my local hardware store. Big mistake! You wouldn't think a simple 3 inch bolt would be hard to find in your local hardware store. But in fact, i checked five hardware stores and none of them had this particular bolt. What a waste of time! I should have learned my lesson by now, and just give all my parts business to etrailer.com. I have probably spent more than $1000 in the past several months refurbishing our 1970 Shasta. Totally satisfied with the selection at etrailer, and the service is second to none!
# 12
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
After receiving my shipment yesterday, I was concerned that parts may have been missing due to the shape of the shipping box and the lack of packing material. During the installation of the shackles, the third shackle nuts/bolts stripped out when tightened by hand. The shackle had to be cut off since the nuts could not be properly tightened. I have emailed etrailer with this issue and hopefully we can resolve the issue quickly.
I really wanted to give this kit a 5 star review, however it fell short in more than one way. The parts are very nice and heavy duty looking and went together purrty good. However, when I went to grease the shackles none took grease it just came out around the fitting, so I changed the end on my grease gun thinking it was just worn out, still same problem. I had to hold the fitting on the zirk as hard as I could and finally got them to take grease, one still hasn't taken grease and not sure what I'm going to do. I left all hardware loose to this point to make sure there was no un nessesary pressure on anything hoping it would take grease easy. It's like the heads of the zirks are a size to small. After greasing everything the best I could I tightened everything up, during this process I had 2 nuts that the threads pulled out of... Just as they got tight they started to loosen up, I was using a standard length 1\2 drive craftsman ratchet, and I'm not hulk. I ended up having a few nuts and washers that worked but still this shouldn't have happened. Makes me wonder about the rest of the metals strength. Looks heavy duty but I'm starting to wonder about longevity.
# 13
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
Good kit with the necessary parts to replace leaf spring suspension. I welded the hangers rather than bolting them. The parts are not coated for the price point so you will need to paint them or they will rust immediately.
# 14
Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
These hangers are great for the center. They provide just enough clearance for your equalizer. Because of the length and being that I am a welder I added a support inside the hanger to keep them rigid!
great product and your staff was very knowledgeable and helpful I have told many friends about it and I will use your company again when needed
# 15
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 6-1/8" Long - 9/16" Center Hole
Brandon was very knowledgeable about what I would need to replace my axles and springs, right down to the sizes for bushings and bolts. I have been using trailer for many years because their service is awesome.
I have a old trailer with nonstandard parts. Eric's tenacity and determination ensured we selected the parts that would fit the old trailer. All parts arrived as expected and fit like original. Could not have done it without Eric.
# 16
Swan-Shaped Equalizer for 2" Wide Slipper Springs - 10-1/8" Long - 7/8" Center Hole
Your knowledge of the parts was excellent my trailer is an older model and I was concerned on receiving the correct parts. Thankfully they are a prefect fit and the delivery was right on time. Thanks John
I think that the one pictured is nice and shinny black And the one I received is rusty
# 17
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center
Brackets came not bent enough and bolt nuts are oval shapped and won't thread because of this. Pretty disappointing I will call customer support soon for replacement
Kit is supposed to be for 1-3/4" springs but the center hangers were for 2", they said they would reship but after a week it still hasnt shipped out. Looks like fair quality stuff just packaged wrong in China!
# 18
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
They seem too wide for the springs on my 7,000 axle.
excellent quality replacement repair parts at a great price.
# 19
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
Great fit. I called to ask what I needed and etrailer made the right suggestions. Fast and friendly service for you trailer needs.
Bought a used car trailer in need of repair, sand blasted and painted the trailer. While working on it more and more things needed to be replaced. This hanger kit was a great match. Thank you etrailer.
# 20
Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
I think etrailer is Great. I think their customer service is fantastic. My wife and I were in Arkansas, 1200 miles from our home in Ft. Myers Florida. I replaced the original springs on our trailer with new heavy duty springs, but never changed the hangers or bolts. Our trailer was riding very poorly, we needed new hangers and bolts badly because we were headed on a very long 9000-mile trip with many stops all the way to the Monterey CA. etrailer found us a UPS Store along our route to send us the parts that we needed. Many thanks to etrailer for great parts and Fantastic customer service and for helping us with our most Wonderful Adventure!
Product was as advertised and work perfectly. I like your company and have purchased many items from you. The shipping was very good and arrived shortly after the purchase.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."