# 1
Curt Pintle Hook for 2-1/2" Hitches - 20,000 lbs
Working great I use the fixed straight hitch when I need a little more hitch height or the adjustable hitch depending on which application works better.
Etrailer is my go-to place for anything trailer related. Good quality, excellent service, prompt delivery. Doesn't get much better than this! Keep up the good work...
# 2
B&W Pintle Hook Mounting Plate for 2-1/2" Hitches - 9" Shank - 8 Hole - 16,000 lbs
Works great to replace my 2 inch unit for my Silverado 2500HD
As usual, very pleased with customer service and prompt shipping.
# 3
B&W Pintle Hook Mounting Plate for 2" Hitches - 13" Shank - 14 Hole - 16,000 lbs
Very heavy, solid steel. Really made for if you have a jacked 4x4 truck and need to lower the hitch . Runs low on a standard suspension rear wheel drive truck. Turned it up to not drag the ground.
As described, but no information on the hole diameter on the website, so the Curt pintle mounting bolts don't fit without drilling.
# 4
Buyers Products 2" Pintle Hook Mount - 1 Position - 9" Shank
works great fast shipping A+++++++++++++++++++
As advertised, good quality of workmanship and finish
# 5
Curt Pintle Hook Mounting Plate for 2" Hitches - 6" Shank - 8 Hole - 17,000 lbs
good quality, showed up with scratches and dinged up but etrailer did make it right.
mounting plante has worked perfectly. it is the only one that i could find that was rated for the weight when mounted upright or down when using a 2" reciever. shows no signs of fatigue after a year of towing a 3500lb trailer with a 13,000lb escavator several times a week. very satisfied with purchase
# 6
B&W Tow & Stow Pintle Hook - 2-5/16" Ball - 2-1/2" Hitches - 10,000 lbs/16,000 lbs
I like the hitch but it is NOT usable for A pintle hitch. The bottom plate where the ring rides in the hitch is flat and very slick and the ring slams around when you turn, stop, and start off. This is VERRY DANGEROUS as it could snap the ball off. If the bottom plate had A place for the ring to lay in it would solve Your Problem. I would like to hear from you Thanks!
The hitch works perfectly on both 2-5/15 ball or pintle ring trailers. When not in use it neatly stows under the truck frame hitch receiver. Two pins and it swings under removing the hazard of someone or something hitting the hitch if were protruding out like traditional ones.
# 7
Brophy Pintle Hook for 2-1/2" Hitches - 36,000 lbs
I do like the strength of the product. The flaws were the actual bolt on the top piece broke off holding the locking pin first week (allen key bolt). I also have to spray or grease the top piece that opens and closes and the rain rusts the joint quickly and is almost impossible to lift up by hand. I would look to purchase another product here since the price is right, but am not happy with the day to day use of this hitch at all. I do not have a picture at the moment, but if I can, I will show some of the issues. Thanks.
We have used these hitches for a year now and they are definitely the way to go!! We use ours daily hauling equipment and haven't had any problem the best part is you don't have to fight any sleeves. I would recommend these to anyone!
# 8
Gen-Y Torsion Pintle Hook Mounting Plate for 2-1/2" Hitches - 16 Hole - 21K
# 9
Buyers Products 3 Position Pintle Hook Mount for 2-1/2" Receiver - 20K
This was my first time ordering with etrailer and I can’t believe how fast I received the products (2days!!) and with free shipping as well . The products are top quality and as described online . The only thing I would add is that I ordered a trailer pintle hitch and a drop mount , and neither one had the bolts to mount the two together nor did I see it offered for sale as a “kit” to be purchased . That would be a nice compliment to add to the package .
Looking for a heavy duty mount for a pintle hook--this seems to be one of the highest rated mounts I could find. Need to add a rear tow hitch to our Rose Parade float chassis due to new parade rules. Easy to install, but did not come with a pin--need to purchase one separately.
# 10
Curt Pintle Hook Mounting Plate for 2-1/2" Hitches - 10-3/4" Shank - 8 Hole - 20,000 lbs
Solid and heavy built product. Lined up perfectly with the 3” down to 2.5” sleeve I previously ordered for my F250 3” receiver. Awaiting the pintle ball combo I ordered to bolt up to this plate. Thanks for the speedy service.
Fantastic product. Not one complaint.
# 11
Buyers Combination Pintle Hook with 2" Ball - 2-1/2" Hitches - 20,000 lbs
Worked perfectly for our needs!
# 12
Curt Pintle Hook for 2" Hitches - 20,000 lbs
Great hitch for hauling my tractor. The team at etrailer is awesome. Keep up the great work - I love all the pics and videos.
Fits to loose in the receiver. Made in China.
# 13
Buyers Products 2" Pintle Hook Mount - 3 Position - 9" Shank
Very well made with substantial weight capacity. Good finish. Bolt pattern fit my pintle hitch perfectly. I’ve ordered many times now from etrailer and the shipping is always fast.
Works excellant as a mount for my pintle. I bought it to run upside down to level my trailer.
What our customers are saying:
"Thank you very much, Great service!!!!!!!!!!"