# 1
24x84 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs
Excellent service, order shipped within one day. High quality bumper cargo rack for our travel trailer. Excellent packaging and the hardware was put together so no second guessing when installing. Would definitely recommend this product.
When I received this rack I originally mounted it on the trailer with the full width (all three pieces). I haven’t figured out a better way to carry my spare tire for the trailer and the rack and tire carrier conflict with each other for mounting purposes. I decided to remove the center section of the rack which makes the rack 61-1/2” wide and allows keeping the spare tire carrier mounted. The picture shows the current configuration. I am able to carry a 3500 watt generator and 4 folding chairs on this configuration which frees up more room in the back of my truck. I was hoping to be able to keep the generator on the rack while running but there is too much vibration in the trailer for that to work. I don’t think putting isolators on the mounting brackets would quiet the vibration enough for that to work so I still have to unload the genny before I run it but it’s easier taking the genny on and off this rack instead of my truck bed. The rack is well made and heavy duty enough for my purposes. After one year no negative issues have occurred.
# 2
Stromberg Carlson Trailer Tray Cargo Carrier for A-Frame Trailers - 300 lbs
The CC-255 cargo tray table will work great on my Aliner Classic camping trailer. Etrailer researched the question I had on mounting requirements, and I was able to position the tray lower mounts just behind the propane tanks. I had to re-position the tray to fit closer to the trailer wall, so that it would not interfere with the turning radius on my 2013 Avalanche that I tow the Aliner with. This cargo tray is heavy, sturdy, and well built...great product! Thanks Etrailer, for the good service and fast shipping!
I bought this after and it had shipped before I seen that it would not fit a v-nose trailer. But that was my fault, but I am here to tell you it will with a few, and I do mean few, and maybe even a couple modifications!Just look at the pics for yourself. I was going to send it back but the metal design and heavy coated paint on it I knew I could not build one better. So I made couple mods and here she is!
# 3
24x60 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs
Did the bumper supports my way. Bolted through both sides of the frame. It was easier for me and seemed to me stronger. The cargo carrier was a breeze and fits nice. Took my time to work on aligning for carrier & spare tire for even weight distribution. It’s going to get more use for off the grid camping.
So the rack is definitely stout! Almost to stout for a front mount! It’s HEAVY when fully assembled! Would have liked it to be a top mount on the bumper so it’s not such a lean on the bumper! The additional bumper brackets are definitely a plus! But it came with 20 bolts and nuts for a universal fit but no self tapping screws for my rectangular bumper frame! Will re view after next trip in September! Going deep into white horse and our ranch which is pretty messed up after the last storms in AZ! Only reason for the 3 star is because the bonus bumper brackets do me no good without the right hardware!If it holds up will update to five star! Will post additional pics after trip!
# 4
Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier for RVs - 99-1/2" Long
Poor design on hinges, doesn’t fit an 80” wide trailer, not universal as far as how it bolts on a box frame, arrived 2 weeks late, and arrived damaged
Great for moving spare tire to under trailer. Great extra storage, however storage boxes are not sealed. Trip thru Alaska and Canada worked great but boxes always full of water and dirt. Had to drill extra drain hole to keep up with water coming around lis. Still worth having.
# 5
Lippert Underchassis Double Bin Storage Unit for RVs - 96" Long
I mounted this on my toy hauler XLR about a foot from the entrance door works well had to drill holes into the bottom of the storage container as water from the rain will fill it up. The two rubber hinges that are riveted to the container lid pretty much suck rivets and the rubber strap will not hold in place need to make a hard mesh strap that will hold in place. Holds up to 100 pounds I can fit my 50 amp fifty foot cable inside one side and all my water hoses and filters in the other. I also fabricate a flat piece of metal and added a slots to slide it into for security.
Solved some storage problems for my rv, just gotta drill a bunch of holes in the bottom to let water drain out. Don't store anything in the bins that can't get wet.
# 6
Clamp-N-Carry Chair Rack for Standard RV Ladders - Nylon
Well made and bolt on tight. My 8ft fibre glass ladder fit good in it or could hold a couple chairs.
Easy to mount and perfect fit for the 2 gravity chairs which have been difficult to manage up until now
# 7
24x64 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs
On July 27th I order e83YR 24x64 folding cargo carrier. Thanks to Jon G. Who provided the dimensions and spacing of the support arms . I was able to determine it would work on my Jayco trailer. The rack (in 2 boxes as expected) arrived n 2 days. Thank you UPS. Due to the extreme heat. I unboxed 1 box at a time . Inventoried everything. Nothing was missing. Did a loose assembly. Everything fit perfectly. Installed the e88ZR bumper supports that came with the rack. The "Trilobular threadforming" screws are NOT threadforming. No problem. Got the proper size tap and threaded the holes. Oh yes after stepping up the bit size . The excluded bit had no trouble finishing off the 6 holes to the proper size. Rack was very easy to install. Good fit and finish. Thank you again Jon G. And George J. I would recommend this rack and etrailer.
Had to reinforce the Trailer frame on a 2021 forest river, as this mounts to the "bumper" forest river only stubs the bumper on with short pieces, and we didn't think that would handle the leverage of weight on the carrier and the "back of the bus" bounce you get on a long fifth wheel. Having said that, we put a 9500 watt 500 Lb. generator on it and went pretty much coast to coast, with absolutely no problems! The carrier itself is awesome, and easy to mount. Fold up feature is great, for the short jaunts without the need for it.
# 8
MORryde Locking RV Storage Box - 10" Deep x 25-3/4" Wide x 10" Tall - 1-1/2 cu ft
I got both the steps and this box to fill the void. Hard part was removing old steps. These work great and look better and gives more ground clearance as we mostly do dock in remote areas. You won’t regret getting them!!!
This will be installed later next year (ie springtime.) The convenience of it fitting in the space left over by removing OEM folding stairway is a simple and effective way of hiding the gap; left by removing old stairway and now going to add just that little more storage space. It locating at the rear of the trailer is a plus too.
# 9
24x40 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs
I was going to build something like this and I saw this on etrailer and thought this is great! Easy to install also. I did modify the cargo rack a little to make it work for me. I have no plans on ever folding it, and I wanted the tool box to fit closer to the trailer wall, so I moved the cargo basket over the bumper mount/hinge and secured with new holes.
Solid built and easy to install. One issue I had was due to the curvature of the back of my trailer just above the bumper, I was not able to stow the rack in the vertical position without notching the rack in two places at the pin insertion points. A slightly longer tab at the pin insertion point would elevate this. Other than that I'm super happy with the rack. Also figured out a way to attach the spare tire to it.
# 10
Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 400 lbs
Easy to install. Just make sure you get the right bolts and nuts for the brackets and not use the tray ones. I carry my small 30 amp generator one it.
Love my GennyGo. Loved the communication and service from etrailer.com as well!
# 11
SolidStep Locking RV Storage Box - Powder Coated Steel - 100 lbs
I had installed the solid step stairs and the old fold out steps where still in place. Extra weight that was not needed. I purchased this and installed it easily myself. It was a clean fit and is used to store my road service gear (bottle jacks, lug wrenches and leveling blocks) to change tires. Definitely worth the purchase.
Fitment and workmanship is first class. Perfect companion to fill the space when we replaced factory steps with Lippert SolidStep on our 2013 Surveyor fifth wheels. Fits perfect, easy install, looks factory...I Like It !
# 12
Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200 lbs
Was very pleased with the generator carrier.
Great product, stronger than I anticipated. Fairly easy to assemble. I did have to cut the support arm ends where they go over the bumper so they didn't hit the trailer cab,no big deal. Happy with my purchase.
# 13
Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Aluminum/Steel - 200 lbs
I was at first surprised at the diminutive size of the box - but it soon became clear - the utter genius in the design of this product. The tray comes in 4 triangular pieces that allow for a variety of set-ups. I purchased the hybrid model aluminum tray and steel support arms. There were a couple of things in the instructions that seemed vague, but a second and third looked confirmed the instruction (this mainly had to do with the attaching of the steel support arms and extension option - as always one should look through the instructions BEFORE beginning the task). Once assemble everything fit like perfectly and was a breeze to install. Also purchased Item #MO34VR support struts. That product proved to be much more work than the tray, but did work out nicely and is a HUGE peace of mind product, totally worth the work and the price. I have a 24' Jayco Jayflight SLX with a 4" square bumper. After drilling through the frame I can assure you you'll need the struts. Yes the bumper joints are welded solid but the metal is not nearly as thick as it may appear. Thinking "this is gonna take all day", a few seconds after starting the drill on the frame, I was through the other side. Buy the struts if you have a comparable rig.
This cargo carrier is exactly what I was looking for. After checking that my trailer bumper was rated for what I wanted to use this cargo carrier for I pulled the trigger and made the purchase. My order shipped quickly and arrived in the time specified. Assembly and mounting were easy enough once I puzzled out the included instruction card. Some mentioned that the assembly instructions are inadequate, there is a web address for the same instruction card but also on that page is a video that will give you some helpful hints though not thorough since that video doesn't show how to assemble the mounting brackets. However, with a little patience puzzling over the included instructions you will figure it out quick enough. I certainly didn't spend more then 30 or 40 minutes getting my GennyGo mounted and assembled. Sorry I didn't take any photos of my process. Anyway, this 24"X24" 200lbs capacity carrier is perfect for what I wanted - A way to carry my generator without having to load it in the bed of my pickup with our bikes. With this cargo carrier I can secure and lock my generator to the carrier and it's ready to go when we pull into our campground.
# 14
Surco Lawn Chair Rack for Vans and RVs - Ladder Mount
Great chair or bike rack .Delivered on time and in good shape .I added a small piece of innertube rubber on each clamp so teeth don't dig into my ladder .
This is a well built device for hanging camp chairs on your RV. Easy to install although you have to be careful which side goes where as there is a Left side and a Right side. I mounted my unit directly to the back of my camper as there is no ladder. It was an easy installation. The brackets easily hold two folding chairs, three might be a tight fit. I only had one problem that was nothing to do with the design or anything, and that is when you drive your RV on dusty or muddy gravel roads the chairs will get very dirty and will have to be rinsed off when you get to your destination.
# 15
Camco Chair Rack for RV Ladders - Steel
Theses seem very sturdy and fit the ladder well. I added some tubing to protect the ladder and reduce wear in the plastic coating on the rack.
I made certain the chairs I carried on the cargo carrier were under the weight limit. However it bend after using it a few months.
What our customers are saying:
"Easy place to shop. Fast delivery and great products. Very happy with my purchase."