# 1
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Came timely and was a complete kit. B&W is by far the best quality turnover ball. Keep it greased and it will work as it should.
A lot of people told me I could not put a goose neck hitch on a 1/2 ton truck. My 2018 Silverado handled the hardware just fine and it pulls an 8,000 lb 3 horse full tack room trailer with ease. I have a 6.5 foot bed - would not recommend this on a 5 foot bed b/c if you jackknife while backing up you will smash your back window. I also recommend installation by a company that does this type of install regularly. I drove an hour to Ocala and had it done at The Hitching Post. They were fair with pricing and easy to work with. Lastly you want to keep a pair of vice grips in your truck to pull up the rollover ball when it is flat. Hay and dust gets in the cracks and it is difficult to pull it up with just your fingers. Overall I highly recommend.
# 2
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
The hitch went in exactly like the directions said and every part was right on the hitch works great I take the ball in and out with ease very happy with the product good quality hitch
Great product, easy install. On a 2023 Chevy 1500 Duramax, you can unbolt the rear fuel tank strap and get enough room to slide the center section in without disturbing the exhaust piping.
# 3
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Great product, handled my 18,000lb GVW 5th Wheel with-out issues. Fast delivery and great customer service too!
product came on time, well packaged, putting unit together was fairly easy only problem we had was getting the bolts out of the truck bed so we could lift it up to slide the rails in.
# 4
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Seems to be good quality, fairly heavy built. The ball locking pin does not fully move to the lock/unlock position using the release handle. I'm not sure if it is out of alignment, or maybe has some paint/coating buildup, but I have to pry the pin to lock/unlock the ball from the hitch. I would have hoped for better. Install was pretty easy, the instructions were decent, however, I think the pictures could be better and more of them. They were very dark in color and difficult to see. I also found some of the bolts impossible to reach with a torque wrench to tighten. I suppose there are torque wrenches that could fit in the tight spots, I just do not have one.
# 5
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
I love my hitch . I love how I can turn it over and I can still have use of the full truck bed. I could of bought a cheaper hitch but the quality is by far better than other hitches I have owned in the past. Customer service was great after they helped me fix my ordering mistake. Very happy with my hitch.
I was very satisfied from ordering to instillation. Great people and very concerned about your satisfaction. Instructions were complete and easy to follow. Saved approximately 50% in cost. Thanks etrailer
# 6
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
I like the hitch but when ai am pulling my trailers, and I am moving them around at low speeds it seems that there is a good amount of movement in the hitch and the feel in the truck. I’m not sure what that is but I have used trucks that didn’t have that feel in them but mine definitely does. We followed all directions and torqued all bolts to the required amount. Maybe someone can shed some light on what that maybe. Thanks
The kit arrived in two days. The quality is very good. All the parts fit as described. We were able to install it in a few hours without a lift. We plan on pulling a 14,000 # trailer to move farm equipment. This trailer will replace an old 12,000# pintle hitch trailer. I would definitely recommend this kit to others.
# 7
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Unit installed and pulled my fifth wheel to provincetowne Mass. Unhooked and pulled the ball out and picked up some firewood. Nice flat surface. Love it. Only way to go.
Great value and durability. Self install in about 3 hours and has remained solid since then. Put in about 10k miles towing a 31 foot trailer with it.
# 8
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Between the videos and the instructions it was very easy to follow. If you’re like me and don’t want to cut your fender liners I simply removed the front bed bolts and jacked one side up to slide in the mounting rails. The only fender I had to cut was the drivers side to allow for the latch pin lever. I really like just how “flush” the hitch really is once you turn over the ball. Overall very impressed with the hitch so far and have already recommended the hitch to other family members and friends.
This hitch is great and I installed it with no problems. This is the hitch to buy if you want quality and strength. The removable ball stores away and is right where you need it.
# 9
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Very nice and well built product, the instructions made sense and were very logical. nice to have made in the USA things available. Would highly recommend!
Install went easy, hitch works great. Only issue was the measurement to drill hole in bed of truck bed was off by ½".
# 10
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Difficult to determine installation ease, as I had the bed off my truck while installing. That made it very easy, but instructions were good and its a straightforward process. Very well made, and fit precisely on my truck. I think the B&W system is very tough to beat. Solid and dependable. And their after sale customer service is excellent.
Great service and a great product! Quick delivery and good communication regarding status. Of course it’s a great hitch, it’s a B&W…
# 11
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Ok first off. The paint adhesion of any b&w product is probably the worst I've seen for the money. The paint is the first thing that falls off. That being said if you know that already and take some precautions like I did then you can really easily fix this problem. I sandblasted the back half of my frame and did the 3 step por-15 method on everything. I currently live in Indiana and I do seldomly drive it in the winter but I hate rust and will be moving more south shortly. I por-ed every part that came with the hitch. Every bolt and nut got anti-seize. The bolts are also of basic quality and will rust fast. Anything that was metal on metal contact has a layer of marine grease to prevent the from from rusting in between. I'm extra but I felt that this was the only way to go to protect everything. It's still a great product and hasn't let me down yet.
I shopped around for a long time to find this hitch, then I contacted Jessica of etrailer she listened to my wants and helped me find what I needed at the right price. And shipped it to me right away, etrailer is the best. Thank You
# 12
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Excellent product for my application. Iam Using a Anderson Hitch to pull a 5th wheel. Leave it in or take it out if you need more bed room I did have a trailer place install it.
Installation was very easy. Everything lined up perfectly. I did not need the inner brackets. I have a 2019 Ford f250 platinum. Absolutely amazing. Another great B and W hitch!!
# 13
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
I bought this for my son, who moved back to the farm, and bought a good used 2002 Chevy duramax so we would have a second truck to pull cattle trailers and haul hay with a fifth wheel flat bed trailer. The B&W underbed turn over ball hitch mounted great and relatively easily. It has performed excellently. My son likes the turn over ball that allows for full use of the pickup box for other uses.
The B&W hitches are the best in the business. I have had 6 of them now from a 92 Dodge, an 07 Dmax, a 2012 HD2500, a 15 Dodge, a 19 HD2500 and a 21 Dmax and now this latest one in an 06 HD2500. I HAVE HAF ZERO ISSUES WITH ALLBOF THESE HITCHES. ZERO!!!!!!!!!. READ the directions and FOLLOW the directions and you will be very satisfied with the results.
# 14
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
It was easy to install and works perfectly so far, I have only towed a 23,000 lbs gooseneck so far and am very pleased.
my install was completely custom as the back end of my 2005 ram 3500 is custom. I converted it into a weld in place hitch since the factory location was not being uses. axle was moved back 28" so the hitch had to be also.
# 15
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Great product w great instructions. It was an affordable package that installed decently. We have used the hitch for a year now and have had zero issues w it. The only reason for not giving it 5 stars was because the cross bars that go between the frame rails needed to have the threaded holes chased w a tap to remove the powder coating prior to installation. I initially tried installing it without chasing the threads and the bolts started to get very tight before the parts even pulled together. Once the threads were clean, everything assembled very well. The hitch takes time to install, at least if you want it to look good and be correct. On a 1500 ram, you will probably need to install some form of helper spring or air bags to prevent the rear from squatting from the weight of the gooseneck trailer…the factory 1500 coil springs are not firm enough on their own.
Ordered this after deciding to go with it over a B&W kit due to me not using it a whole lot and the price difference. When I received the package 1/2 the hardware was missing because the inner box it was in was all broke apart and the outer box was not sealed up. So I would have to give the packaging and shipping one star because I had to go spend an extra $75 on grade 8 hardware. The paper directions were not totally clear on several thing so we resorted to the video which helped a lot. The two large carriage bolts that go in the rear cross member are a little deceiving because the video makes it seem like they slip right in. However, the heads were larger than the pass through in the frame rails so it took quite a bit of extra time and ingenuity to get those fished through there with the plates.(The carriage bolts survived shipping so they were what came with the kit). In the video it showed where he cut a large u out of the inner fender to clear the pull handle and notched the bed that looked kind of sloppy. With a few extra measurements you can just cut a hole in both for handle to slide through and give it a much cleaner look. Definitely recommend putting a bolt through receiver holes and using a strap to hold up center plate through hole in bed after you get it into place. Makes life a lot easier until you get the bolt ls in. Overall this hitch works and functions great. Install went pretty smooth with two people and I would recommend it to anyone needing a hitch.
# 16
B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs
I got a reduce price on a B&W weld in five wheel ball mount do to cosmetic scathing on tow ball which was almost non excestant save 65 dollars as usual B&W makes the most high qaulty parts and e trail are always excellent shipping was faster than they said. Thx again for passing on the savings to the customer
Came in a timely manner, about a week from the time I ordered it to it delivered to my door step in Alaska. The hitch itself is very high quality with nice clean welds and sharp clean edges which took almost no prep work to weld in to the frame I had built for it. You could tell by looking at this that B&W uses nice welding equipment and employs quality welders. Overall very happy with this. Installed on Monroe flatbed on F-450 cab and chassis truck.
# 17
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
This was my first order I placed with et etrailer. If one work could say it I guess it would perfect! I ordered on a Tuesday arrived on Thursday. I Placed the order got conformation and a name and contact to call if I had any issues, once it arrived I got another email letting me know if had been delivered. The installation video was perfect made it’s easy to install just followed the steps. When I need any trailer related items I will use them. As far as the B&W hitch i put it in a 2017 Ram 2500 with Ram boxes. The fit and quality of the hitch and design is what I have come to expect from B&W. I got this hitch to pull a gooseneck horse trailer. If your wondering if it will work with Ram Boxes it will.
Great product from a great company. B&W sets the bar when it comes to all things towing/trailer related. And etrailer.com compliments them very well with customer service. I have utilized my turnover set up for about a year now with no issues. the convince of having a gooseneck ball when needed but still having complete use of my bed space critical for me as a contractor. I am constantly using the bed of my truck to haul tools and light material from site to site but also on occasion have to pick up bulk materials or move equipment with our gooseneck. The turnover ball from B&W was exactly what we needed to remain versatile.
# 18
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Installed easily on 2015 GMC 2500 HD double cab short bed. Plenty of clearance under the bed when ball is flipped. This system makes for a clean useable bed. When I was purchasing this I was concerned about clearance of a gooseneck hitch and my transfer tank. I have a 40 gal tank that sits back from the cab a bit over 20 inches, there’s plenty of clearance for a gooseneck with a fuel tank on this short bed. The hitch has held up perfectly over the last year. I haul around 12k on steep, washboard, gravel roads.
I think this gooseneck hitch is the best for newer Sierra/Silverado HD trucks. I installed it a week ago with the help of my father-in-law and his car lift. Took about 4 hours moving slowly and taking our time. Everything fit well and bolted right up. I also reinstalled the foil heat shield after removing one mounting ear. I did not drop the exhaust or the plastic heat shield and still got everything in. I chose this specific kit because it did not require notching the bed seam when installing the rails. It also has a higher tongue load rating than the others and was cheaper. The only major criticism I have is the pull wire and carriage bolts. My chassis has weld nuts and I would have preferred to use those over carriage bolts pulled into the chassis. I am thankful there were access holes almost inline with the mounting holes. That made it easy to put pressure on the bolt heads so they didn’t fall back. I also think the gasket around the big hole should be one piece to make it look cleaner. I used black silicone rtv to smooth the transition and adhere the gasket in place. Overall I am completely satisfied with the kit and the help of Shawn B who got my order in, had it shipped that same day and followed up with me after delivery. Thanks etrailer and Shawn B.
# 19
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Great hitch! I put this on my 2021 F-150 LB to tow our 10k lb fifth wheel and it worked exceptionally. I love how the ball can hide away to let you use the full bed for other things. Took about two hours to install, including cutting the holes and painting them. You'll want two people for this install. I paired this with an Anderson Ultimate Connection gooseneck hitch and Roadmaster Active Suspension system and my little 3.5l V6 1/2 ton towed this trailer with ease.
The hitch is great, the directions were easy to follow and was an easy install.
# 20
Curt EZr Double Lock Underbed Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
Great hitch and easy to use. I did have to lift up the bed a little bit to install it. Took me about 5 hours because of that but otherwise it is a great hitch. The rings for the safety chains stay on the bed and the ball flips over and stows away completely.
Seems to be very well built. Shipping was very fast. Will definitely purchase other products.
What our customers are saying:
"You folks are fast. Thank you very much."