# 1
Curt Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails, 25,000 lbs GTW
Had to hit one of my rails with a 2 lb sledge just a fuzz to let the tab drop in. The locking tabs are a good idea for the pins. I put my late grandfather’s old classic padlock from his jon boat on one of the tabs. A little nostalgia.
Well built heavy duty fit into the fifth wheel rail with no issue thanks
# 2
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
I like the hitch but when ai am pulling my trailers, and I am moving them around at low speeds it seems that there is a good amount of movement in the hitch and the feel in the truck. I’m not sure what that is but I have used trucks that didn’t have that feel in them but mine definitely does. We followed all directions and torqued all bolts to the required amount. Maybe someone can shed some light on what that maybe. Thanks
The kit arrived in two days. The quality is very good. All the parts fit as described. We were able to install it in a few hours without a lift. We plan on pulling a 14,000 # trailer to move farm equipment. This trailer will replace an old 12,000# pintle hitch trailer. I would definitely recommend this kit to others.
# 3
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Unit installed and pulled my fifth wheel to provincetowne Mass. Unhooked and pulled the ball out and picked up some firewood. Nice flat surface. Love it. Only way to go.
Great value and durability. Self install in about 3 hours and has remained solid since then. Put in about 10k miles towing a 31 foot trailer with it.
# 4
Curt Overbed, Folding Ball Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
Etrailer is awesome, not so much for this product. My first and primary issue is that the safety chain u-bolts are positioned to close to the angle iron brackets to allow clearance for them to freely move up and down with the nuts installed (see photos). I can force them up from below with a hammer and stomped them back down from above. This problem is made worse due to the proximity to the ball, if I dont ensure they arent stomped down as much as possible they would interfere with my coupler when turning. I'm honestly still worried about interference if I find myself in any off camber turn. The other problem I have isnt the fault of the hitch, but now that its installed it is still much more intrusive to the bed space when folded flat than I anticipated. In the past I've had under bed mount balls, this being a work truck I thought the cheaper option would work but I regret that decision.
Etrailer has always come through . Even if there is an issue they respond quickly and that means alot . The prices are the best .
# 5
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Great product w great instructions. It was an affordable package that installed decently. We have used the hitch for a year now and have had zero issues w it. The only reason for not giving it 5 stars was because the cross bars that go between the frame rails needed to have the threaded holes chased w a tap to remove the powder coating prior to installation. I initially tried installing it without chasing the threads and the bolts started to get very tight before the parts even pulled together. Once the threads were clean, everything assembled very well. The hitch takes time to install, at least if you want it to look good and be correct. On a 1500 ram, you will probably need to install some form of helper spring or air bags to prevent the rear from squatting from the weight of the gooseneck trailer…the factory 1500 coil springs are not firm enough on their own.
Ordered this after deciding to go with it over a B&W kit due to me not using it a whole lot and the price difference. When I received the package 1/2 the hardware was missing because the inner box it was in was all broke apart and the outer box was not sealed up. So I would have to give the packaging and shipping one star because I had to go spend an extra $75 on grade 8 hardware. The paper directions were not totally clear on several thing so we resorted to the video which helped a lot. The two large carriage bolts that go in the rear cross member are a little deceiving because the video makes it seem like they slip right in. However, the heads were larger than the pass through in the frame rails so it took quite a bit of extra time and ingenuity to get those fished through there with the plates.(The carriage bolts survived shipping so they were what came with the kit). In the video it showed where he cut a large u out of the inner fender to clear the pull handle and notched the bed that looked kind of sloppy. With a few extra measurements you can just cut a hole in both for handle to slide through and give it a much cleaner look. Definitely recommend putting a bolt through receiver holes and using a strap to hold up center plate through hole in bed after you get it into place. Makes life a lot easier until you get the bolt ls in. Overall this hitch works and functions great. Install went pretty smooth with two people and I would recommend it to anyone needing a hitch.
# 6
Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch - 35,000 lbs
I like everything except. One of the u bolt’s for the safety touches the top of the crossover pipe under the bed. I keep a towel under it so it doesn’t rub a hole in my pipe. I followed the directions and used what came with it to lay it out. So I don’t know how that happened.
# 7
Curt Overbed, Folding Ball Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
Quick Delivery, Direct Fit
Got this for the 01 2500HD Sierra. Metal is extremely thick and strong. However, The holes for the bracket pull the cross bars up to the bottom of the truck better. Makes it seem like a lot of the weight is resting on the bolts and not the crossbars/frame.
# 8
Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch - 30K
When I placed my order I was given the option of taking a slightly used item for a nice discount. It arrived and looks BRAND NEW! I am happy once again for the quick service and great products from etrailer.
Excellent . I love this whole unit. As a single woman I really appreciate the case to hold the hitch and tie down rings. When I need to use the gooseneck in my truck it's quick and easy to install. When I need the full bed to haul hay and bags of grain, the hitch can be stored away under the back seat in my truck. Very bpkeased with the quality.
# 9
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Installed easily on 2015 GMC 2500 HD double cab short bed. Plenty of clearance under the bed when ball is flipped. This system makes for a clean useable bed. When I was purchasing this I was concerned about clearance of a gooseneck hitch and my transfer tank. I have a 40 gal tank that sits back from the cab a bit over 20 inches, there’s plenty of clearance for a gooseneck with a fuel tank on this short bed. The hitch has held up perfectly over the last year. I haul around 12k on steep, washboard, gravel roads.
I think this gooseneck hitch is the best for newer Sierra/Silverado HD trucks. I installed it a week ago with the help of my father-in-law and his car lift. Took about 4 hours moving slowly and taking our time. Everything fit well and bolted right up. I also reinstalled the foil heat shield after removing one mounting ear. I did not drop the exhaust or the plastic heat shield and still got everything in. I chose this specific kit because it did not require notching the bed seam when installing the rails. It also has a higher tongue load rating than the others and was cheaper. The only major criticism I have is the pull wire and carriage bolts. My chassis has weld nuts and I would have preferred to use those over carriage bolts pulled into the chassis. I am thankful there were access holes almost inline with the mounting holes. That made it easy to put pressure on the bolt heads so they didn’t fall back. I also think the gasket around the big hole should be one piece to make it look cleaner. I used black silicone rtv to smooth the transition and adhere the gasket in place. Overall I am completely satisfied with the kit and the help of Shawn B who got my order in, had it shipped that same day and followed up with me after delivery. Thanks etrailer and Shawn B.
# 10
Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch - 32,500 lbs
The install was slightly more difficult on this curt hitch than the BW hitch, but this one was on sale at the time so I chose to give this one a try. Both styles give you a little workout but the hardware package is easier to work with on the BW hitch
I bought this Curt Gooseneck Hitch For my new 2020 Chevy HD Silverado Standard Bed Duramax. I did the install myself, in my garage and without the use of a lift. I spent about 8 hours to get it done. The parts are heavy, so take that into account if you’re wanting to do it yourself. Watching a Curt install video during the process was key to installing it successfully. Only thing I would suggest during the install, and for the driver’s side only, is to loosen the rearward gas tank strap, which allows a little more room for fishing the one inside frame retaining plate and bolt. Very happy with the quality of this hitch and of the price from etrailer.
# 11
Curt Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails - 30,000 lbs
I just installed the Spyder Gooseneck Hitch. First the Hitch weights 77 lbs. The Hitch fit in very tight. The Curt Spyder Gooseneck showed up ony a couple days....I am very pleased with the Spyder. I haven't been able to tow with it yet but I believe it will do great!
This fits perfectly in my existing rail system
# 12
Curt EZr Double Lock Underbed Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
Great hitch and easy to use. I did have to lift up the bed a little bit to install it. Took me about 5 hours because of that but otherwise it is a great hitch. The rings for the safety chains stay on the bed and the ball flips over and stows away completely.
Seems to be very well built. Shipping was very fast. Will definitely purchase other products.
# 13
Curt EZr Double Lock Underbed Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
Nice clean look. Most importantly didn't have to lower exhaust. centering the hitch in the bed was easy because of the template provided. Although install did take longer than what was noted, it was fairly simple. Would definitely purchase again.
I have had a few different GN hitches over the years and this model is top notch. The installation was straight forward and the drill guide made the location of where to drill effortless. If I had to pick a place where improvement could occur, it would be the resistance of the safety chain loop springs. They ensure rattles don't occur, but getting the chain loop inside can be difficult at times. Overall the construction is very robust. The nice touches such as the rubber cap and the price point make this a great option. I would repeat the purchase.
What our customers are saying:
"Fast shiping and great communication. Product was very easy to install and it came with great directions. Very happy with this company."