# 1
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
This hitch has worked out great for me over the last year. It’s very heavy duty and easy to adjust. I’ve hauled a 9,000 lb boat, long-distance on numerous occasions without issue. I also haul a landscape trailer on a daily basis weighing over 5,000lbs and haven’t had a single issue. Great hitch that was significantly cheaper than others and is very high quality. I’ve recommended it to several people and I wouldn’t hesitate to buy again. The only thing I would like to have now in a hitch is a tongue weight gauge, but it isn’t necessary.
This is a great hitch. Highly recommend this hitch. This is my second curt hitch, first one was on my ford f450 but unfortunately that one wouldn’t fit on my new truck, do to shank size.
# 2
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
# 3
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.
I am very pleased with the hitch, ball mount, and electrical package. All were easy to install if you follow the easy to understand directions. An added plus for putting one of these on a MINI is that the hitch can be hidden behind the "black plate/cover" that is on the rear bumper. It looks just like it came out of the factory except when to need to install the ball mount. The service has been outstanding. This is the place to go.
# 4
Curt Forged Ball Mount for 2-1/2" Hitches - 1/2" Rise - 2" Drop - 20,000 lbs
Very good heavy duty rating which is what I wanted. etrailer was great to work with
I have been towing trailers many years With no issues until recently. Trailer weights have increased and loads also. My three way ball with 2 5/16 was torn off of tubing because of insufficient welding, I was very lucky. Yes I went to a solid receiver with bolt style ball. Very great setup. Thanks curt for designing heavy hitches and etrailer for easy ordering.
# 5
Draw-Tite Ball Mount for 2-1/2" Hitches - 1-1/2" Rise, 3" Drop - 10" Long - 18K
Well the first one was lost in shipping so I had to buy something local but I will definitely be using this one instead. It is MUCH beefier then the 14K one I picked up locally.
I have a truck with a class 5 hitch. Using the 2" to 2 1/2" adapter had a lot of play in it and this ball mount removed that play. The truck and me won't bounce around so much. Thanks for the great deal and fast shipping. Will be shopping with you again. Thanks again.
# 6
Curt Adjustable 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 5-1/4" Rise - 20K
The product was well described on the web site. The truck matching worked great and was easy to use. This hitch was very easy to order and the price was good. The delivery date was correct, it was easy to follow with the information provided. The hitch was as advertised, easy to install and easy to use. Great Job!
First of all, ETRAILER is a great company in my opinion. Their selection, prices and customer service are all great. This hitch is stout! I'm the type that I'd rather have more capability than what I may actually use. For what I will use this for, I'm 100% sure it will be way more than I'll ever need but I'm also confident that I would not have any issues using it regularly at it's maximum capability. The construction of it is top notch and I'd be willing to bet it can do more than what it's rated for. I will definitely be ordering the 20K Pintle that works with this as well as a Curt 5th Wheel and Gooseneck. Thank you ETRAILER and thank you CURT for amazing service and and amazing product.
# 7
Reese Ball Mount - 3-1/2" Rise, 5" Drop - 10" Long - 18,000 lbs
I have a 2015 Ford F-250 with the factory 2.5" receiver hitch. This drop ball mount fits into the factory receiver well, contrary to the product warning. It is also extremely beefy, you will not be disappointed! Photo fitment proof!
Very Strong ball mount. My wive (its her truck), towed 7000# of horse, tack and trailer last saturday. I know this ball mount is overkill but it is easier than using a 2" with the receiver adapter. Also this way if we have to tow something real heavy we already have the ball mount for it.
# 8
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
Very versatile - can use it on both my vehicles that have very different hitch height. Clean welds, super solid. Weighs a LOT!
# 9
Flash Secure Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Very strong, easy to install and very secure. Yes a bit pricey, but well worth the money. I did notice there was what I thought was an unusual amount of play in the receiver. I called etrailer and Marcia was so very helpful and very concerned that I may have received the wrong product. She even called the manufacturer and found out what the changes that were made by the manufacturer which made the pictures incorrect. My hat is off to Marcia and all the folks at etrailer
ball mount fits loosely in the receiver so that the pins that extend out from the ball mount shaft through the holes in the receiver don't extend out far enough, for my liking. This is because since the ball mount shaft has so much play, it will shift to one side. Then, the pin on the other side does not extend all the way out of the hole so that it is not flush. True, i am being paranoid. However, i imagine a case like a crash where enough force could pull the shaft out from the not fully extended pin side to release the trailer to wreak more damage. I would just feel more secure if the pins went out further through the receiver or the shaft was not so loose. Otherwise, i really like the product a lot... enough to give it four stars... :o)
# 10
Flash Simple Heavy Duty 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 6" Rise - 18K
Love my new hitch and the adjustability. Much lighter than my previous hitch
The product is one of the best made items I’ve seen in a very long time. Etrailer was very responsive with the order and I received the product very quickly.
# 11
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks
# 12
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 5-1/2" Drop
I pay to receive the product in good condition, my hitch ended up being damaged, I don't know what type of packaging this was, they are supposedly a waoooo site, I ask for my return label and my refund, I
Works flawlessly. I was very excited the day I got home and my Rapid hitch was on the front porch. It came in nice box and was packaged very well. I opened it up and unpacked my rapid hitch and I was very impressed with the quality and precision of this hitch. All of the machining was PERFECT and everything fit together right. I put it in my truck right away. Going down the road with the trailer on and off there is absolutely no rattles, clunks, or jolts. I also love how everything is aluminum or stainless steel, NO RUST. I wish I could've gotten the greaseless model but my boat is too heavy. My only complaint is that it doesn't come with locking pins. With a hitch this expensive I really wish it came with them. Do yourself a favor and order them with your rapid hitch so you don't have to pay for shipping in the future. Other than that great product and I believe it will outlast me.
# 13
Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 9-1/4" Long - 16K
Perfectly as described, Box was a heavy hitch and the box must have been damaged in shipping so it was a little delayed. You can't mess up a forged hitch it still is in excellent condition.
This simple ball mount will get the job done. It's a solid casting so it weighs a lot.
# 14
etrailer Ball Mount Kit for 2-1/2" Hitches - 1-1/2" Rise or 3" Drop - 18,000 lbs
I am a frequent etrailer customer, the variety and availability of quality components and excellent service is what keeps me coming back. When trailering I strive to be as safe as possible, which is why I chose this heavy duty ball mount to tow my 10,000# car hauler trailer. With this very robust piece, I can be assured that the connection between my truck and trailer is secure.
This was our company's first ETRAILER order. My original order was for a Blu Ox receiver reducer. The plan was to continue using our current 2" drawbars with the 2 1/2" receiver on the "new" (2008) truck. Upon installation it was very apparent that there was way to much side play for safe towing of heavy loads on gravel roads. ETRAILER customer service was contacted for assistance. Holly was extremely knowledgeable regarding the product line and also had "hands on" experience with trailer towing. She not only guided me to the best resolution to my issue; but, also expedited shipment of the replacement drawbar. She further emailed a return shipping label for the reducer that was easy to print, along with straight forward and easy to understand instructions for the return. The UPS driver even commented about the label being the correct size as opposed to many undersized labels that he has received. Our company will now use ETRAILER as our "go to" vendor for trailer repair and towing supplies. As for the drawbar, the construction is one piece forged steel with an I-beam design. The ball appears to be high quality. I have complete confidence that the drawbar and ball kit will perform as needed when we are towing equipment or logs on gravel and dirt roads; as well as, off-road.
# 15
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
I have two of these. My first I bought two years ago. I very highly recommend this Curt Class III Ballmount 2" Drop because of its price, durability and quality. I towed various class 3 loads with ease and confidence with this ballmount. It slides into the hitch and does its job without fail. It looks excellent after towing a load. etrailer's price is about as good as it gets and delivery is very speedy.
Easy install, took around 30 minutes by my self to install. Hardest part of install was torquing the bolts ! Installed 13322 Class III Hitch - Gm 1500/2500 Pickup and Curt Class III Ballmount -2ball-2 Drop
# 16
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
This is a beast of a drawbar, solid forged steel & well finished. It's also very heavy and E-Trailer needed to ship 3 times because the first two broke out of the box they were packed in. (Someone in the USPS has a couple nice draw bars.) Fortunately the 3rd effort was much better packed in a reinforced box and was successfully delivered. E-Trailer customer service was exemplary in resolving the shipment issue & I will definitely shop with them again.
I had a great experience ordering from you. Your organization kept me completely up to date with the order & shipping process and delivered the exact products I ordered. Attached is a photo of the 16,000 lbs capacity hitch and 30,000 lbs 2 5/16 ball you sold me in use. The boat and trailer total about 12,000 pounds. Thanks again.
# 17
Curt Forged Ball Mount for 2-1/2" Hitches - 2-1/2" Rise - 4" Drop - 20,000 lbs
Hitch ball and mounts all ready to the test!!! Great Products!! Five Star e-trailer team, very informative, fast and accurate shipping, perfect packaging and "GREAT" customer service"
This review does not just serve my recent order, but all of the orders before it. I have purchased a number of items from etrailer and everything was sent in a timely manor as stated and promised. All of the items I received were exactly as described. I watched a number of videos, read a number of diagrams and all of the help information was exactly what I needed. In other words I did not need to go anywhere else to get a full tow package for a Dodge 5500 that did not have one. I cannot say enough about how this website helped me. Also the pricing was about the best I could find and I did a lot of searching to make sure. This is a top notch site and I will absolutely come back here for my future towing needs.
# 18
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
Gone are the days I need to carry three different hitches with different sized balls on them. Gone are the days when I, or others, walked around the back of my truck and cracked their shin on a protruding trailer hitch. I keep this folded up in front of the drop where it's not going to catch anyone by surprise. When I'm ready to use it, I simply pull two pins out which allows it to drop free and rotate out. I choose the height I need and install the two pins/clips. To rotate the balls, again simply pull the third pin and rotate to desired size. It was more than I wanted to spend at the time but since I'm glad I spent the money.
Super convenient and well worth the money. All 3 of my trailers have a different ball size, and this is a breeze compared to constantly swapping tow hitches. Keep the pins well lubricated, and they slide well maintain their appearance.
# 19
B&W Tow & Stow 3-Ball Mount - 2.5" Hitch - 7" Drop/7.5" Rise - 18K - Black
I purchased this hitch for my 2024 GMC Sierra 3500 which has the multiple tailgate. The hitch was in the stow position but still damaged my tailgate when I had the tailgate fully down and used the step feature. it bent the metal and scratched the paint. So please be aware this hitch is not recommended for the 2024 GMC sierra 3500 with multiple tailgate.
About a year ago, I bought a new to me truck that needed a 2.5" hitch. I love this 3 in 1 setup. I really like that it stows and I can always have it back there. I haven't used the 1 7/8" yet, but there are plenty of old trailers out there that would need it at some point. I have used the 2" & 2 5/16" plenty. It's sturdy, looks good, and is super convenient, what's not to like about it.
# 20
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
I purchased the etrailer.com 2-3/4 " Rise or 4" Drop Ball Mount Kit, Curt Trailer Hitch Receiver and Twist-in 7-Pole RV-Style Trailer Connector for my 2011 Chevy Silverado. Quick Delivery! All the necessary parts arrived in perfect condition. Directions were spot on and the instructional videos were great.
The drop ball mount is the perfect size for my Jeep. The versatile hitch balls are convenient. Thank you for putting together a great kit, providing excellent communication, and delivering it quickly.
Curt Tri-Ball Mount Review - 2012 GMC Sierra
Today on our 2012 GMC Sierra we'll be test fitting the curt-tri-ball-mount for two inch hitches. Part number C45001. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. We'll then secure it with the pin and clip. Now, since this ball mount has no drop or rise, if your vehicle's hitch height matches your trailer's ride height, no this would be an appropriate ball mount for you. With the ball mount In this position, the 2 and 5/16th inch ball is on the top. We can flip it to the left to match the 1 and 7/8ths inch ball or to the right to access the 2 inch ball.
Convert-A-Ball Pintle Mounting Bar Review - 2012 GMC Sierra
Today on our 2012 GMC Sierroa we'll be test fitting the convert-a-ball cushioned adjustable pintel mounting block for 2 inch hitches, rated at 10,000 pounds, part number AMPC2. Before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 18 and one quarters inches. Keep In mind, this measurement may vary due to tire size, hitch style or other after-market accessories. We'll now begin our test fit by sliding the shank of the mounting bar into the opening of the hitch. We'll then secure it with a pin and clip.
MaxxTow Tow Strap Loop Review - 2012 GMC Sierra
Today on our 2012 GMC Sierra, we'll be test fitting the Maxxtow Tow Strap Loop for two inch hitches, rated at 10,000 pounds, part number mt70029. We'll begin our test fit by sliding the shank of the tow strap loop into the opening of the hitch and securing it with the pin and clip which is sold separately. You can use this heavy duty hitch mount jackal as an attachment point for strap, cable or rope and can be used in agricultural, industrial or recreational applications. That'll complete today's test fit for the Maxxtow Tow Strap Loop for two inch hitches, part number mt70029 on our 2012 GMC Sierra. .
Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2012 GMC Sierra
Today on our 2012 GMC Sierra well be test fitting the Convert-A-Ball Cushioned Ball Mount for 2-inch hitches part number AMSC4. Now before we begin our test fit we will first need to obtain the hitch height for our vehicle. This is the measurement from the ground to the inside top of the receiver tube and ours is about 18 inches. Now to begin our test fit in the draw position well insert the shank of the ball mount into the hitch, line up our hitch pin hole and put our pin through the hitch pin hole and secure it with a clip. Well then measure from the ground to the top of the ball platform and get a measurement of 14 inches. Now for your trailer ride height which is the measurement from the ground to the bottom of the coupler while your trailer is level matches ours this will be an appropriate ball mount for you.
MaxxTow Ball Mount Review - 2011 GMC Sierra
Today on our 2011 GMC Sierra well be test fitting the Maxxtow ball mount with 2-inch accessory receiver for 2-inch hitches with a 2 -inch drop rated at 5,000 pounds, part number mt70066. Before we begin our test fit, we will first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle is 17 inches. Keep in mind this measurement may vary due to hitch style, tire size, or aftermarket accessories. Well begin our test fit by sliding the shank of the ball mount into the opening of the hitch and securing it with a pin and clip.
Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2011 GMC Sierra
Today on our 2011 GMC Sierra, we'll be test fitting the Convert-A-Ball cushioned 6-way multi-hitch ball mount for 2" hitches, rated at 10,000 lbs., part number CAB-6W. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch, and securing it with a pin and clip. Now since this ball mount has no drop or rise, if your trailer's ride height matches your vehicle's hitch height, the ball mount would be appropriate for you. We can rotate the ball mount to access the three different-size balls, a 2-5/16" ball, a 2" ball, and a 1-7/8" ball. Also, this ball mount can work with a clevis, lunette ring, or spade. And with that, that will complete today's test fit for the Convert-A-Ball cushioned 6-way multi-hitch ball for 2" hitches, part number CAB-6W, on our 2011 GMC Sierra..
Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review - 2011 GMC Sierra
Today on our 2011 GMC Sierra well be test fitting the Convert-a-ball dual cushioned adjustable ball mount with a 7-inch rise or 9-inch drop rated at 5,000 pounds, part number cab-um. Well begin our test fit by sliding the shank of the ball mount into the opening of the hitch. Well line up the pin holes and secure it with a pin and clip. Now with the ball mount in the drop in its lowest position, we can measure from the ground to the top of the ball platform. Well get a measurement of about 13 inches. We can then pull the pin to raise the ball mount platform to its highest position while also in the drop.
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2011 GMC Sierra
Today, on our 2011 GMC Sierra, well be test fitting the Convert-A-Ball Cushion Ball Mount for two inch hitches with a 6-3/4 inch rise or eight inch drop, rated at 10,000 pounds, part number AMSC8. Before we begin our test fit, we will firstly obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle has 17 inches. Keep in mind this measurement may vary to the hitch style, tire size or aftermarket accessories. Well now begin our test fit in a drop position by sliding the shank of the ball mount into the opening of the hitch.
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2011 GMC Sierra
Today, on our 2011 GMC Sierra, well be test fitting the Convert-A-Ball Cushion Ball Mount for two inch hitches with a one inch rise or two inch drop, rated at 14,000 pounds, part number AMSC2HD. Before we begin our test fit, we will firstly obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle has 17-1/2 inches. Keep in mind this measurement may vary to the hitch style, tire size or aftermarket accessories. Well begin our test fit by sliding the shank of the ball mount into the opening of the hitch in a drop position.
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2011 GMC Sierra
Today on our 2011 GMC Sierra well be test fitting the Convert-a-ball cushioned ball mount for 2-inch hitches with a 3/4-inch rise or a 2-inch drop rated at 10,000 pounds, part number amsc2. Before we begin our test fit we will first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle is 17 inches. Keep in mind this measurement may vary due to hitch style, tire size, or aftermarket accessories. Well now begin our test fit by sliding the shank of the ball mount into the opening of the hitch.
MaxxTow Adjustable-Height Ball Mount Review - 2011 GMC Sierra
Today, on our 2011 GMC Sierra, well be test fitting the MaxxTow Adjustable Height Ball Mount for two inch hitches with a 10 inch drop or eight inch rise, rated at 5,000 pounds, part number MT70067. Before we begin our test fit, we will firstly obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle has 17-1/2 inches. Keep in mind this measurement may vary to the hitch style, tire size or aftermarket accessories. Well now begin our test fit in a drop position by sliding the shank of the ball mount into the opening of the hitch and securing it with a pin and clip.
MaxxTow Tow Strap Loop Review - 2011 GMC Sierra
Today, on our 2011 GMC Sierra, well be test fitting the MaxxTow Tow Strap Loop for Two Inch Hitches, rated at 10,000 pounds, part number MT70029. You can use this heavy-duty hitch mounted shackle, as an attachment point for strap, cable or rope. It can be used an agricultural, industrial or recreational applications. The hitch pin and clip are sold separately. To begin our test fit, by simply sliding the shank into the opening of the hitch and securing it with the pin and clip. With that, that our complete todays test fit for the MaxxTow Tow Strap Loop for Two Inch Hitches, part number MT70029, on our 2011 GMC Sierra..
Draw-Tite Ball Mount Review - 2011 GMC Sierra
Today, on our 2011 GMC Sierra, well be test fitting the Draw-Tite Ball Mount with a inch rise or two inch drop, rated at 7,500 pounds, part number 2923. Before we begin our test fit, we will firstly obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle has 17 inches. Keep in mind this measurement may vary to the hitch style, tire size or after market accessories. Well begin our test fit by sliding the shank of the ball mount in a draw position into the opening of the hitch and securing it with the pin and clip.
Diversi-Tech Adjustable Ball Mount Review - 2011 GMC Sierra
Today, on our 2011 GMC Sierra, well be test fitting the Diversi-Tech Self Locking Adjustable Aluminum Ball Mounted Two Chrome Balls with the six inch drop or seven inch rise, rated at 10,000 pounds, part number DTALBM6600. Before we begin our test fit, we will firstly obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle is 17 inches. Keep in mind this measurement may vary to the hitch style, tire size or after market accessories. Well begin our test fit in a draw position by sliding the shank of the ball mount into the opening of the hitch.
Convert-A-Ball Cushioned Pintle Hook Combo Review - 2011 GMC Sierra
Today, on our 2011 GMC Sierra, well be test fitting the Convert-A-Ball Cushion Pintle Hook Combo with three nickel plated balls, rated at 16,000 pounds, part number PH2. Well begin our test fit by sliding the shank of the ball mount into the opening of the hitch and securing it with the pin and clip. Now, to access the pintle, or to be able to use one of the three nickel plated balls, we can pull the gold safety pin at the base, and then pull out the silver circle and lift up on the handle. This will allow us to remove the sleeve exposing the pintle, or to be able to install the three nickel plated balls. Now, since this ball mount has no drop or rise, if your trailers ride height matches our vehicles hitch height, this will be an appropriate ball mount for you. That our complete of todays test fit for the Convert-A-Ball Cushion Pintle Hook Combo with three nickel plated balls, part number PH2, on our 2011 GMC Sierra.
Andersen Rapid Hitch Ball Mount Review - 2011 GMC Sierra
Today, on our 2011 GMC Sierra, well be test fitting the Rapid Hitch Adjustable Aluminum Ball Mount Kit with two chrome balls, with the 5 inch drop, part number AM3410. Before we begin our test fit, we will firstly obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height on our vehicle has 17 inches. Keep in mind this measurement may vary due to the hitch style, tire size, or aftermarket accessories. Well now begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch, we can then secure it with the pin and clip.
Draw-Tite Ball Mount Review - 2010 GMC Sierra
Today, on our 2010 GMC Sierra, well be test fitting the Draw-Tite Ball Mount with rise or 2 drop, rated at 6,000 lbs, part number 2923. Now before beginning our test fit, well need to get our hitch height measurement. To do this, well measure from the inside top edge of the receiver tube to the ground. Now on this truck, that measurement is 17-3/4. Now keep in mind that, that measurement can vary due to hitch style, tire size or any other accessory which may change the vehicles right height, so its a good idea to measure yours. Well now go ahead and insert the ball mount shank into the hitch, line up the hitch pin hole, and install our hitch pin.
Andersen Rapid Hitch Ball Mount Review - 2005 GMC Sierra
Today, on our 2005 GMC Sierra, we'll be test-fitting our Rapid Hitch adjustable aluminum ball mount kit with two chrome balls, part number am3410. Now, to begin our test-fit, we'll need to go ahead and get out hitch height measurement. To do this, we'll measure from the inside top edge of our receiver tube to the ground. Now, on this truck, that measurement is 20-and-a-half inches. Now, keep in mind that the measurement can change die to tire size, hitch style, or any other accessory which may change your vehicle's ride height, so it's a good idea to measure yours.We'll now go ahead and slide the shank of the ball mount into the hitch, lining up the hitch pin hole, and installing our pin and clip. That will secure the ball mount to our Sierra.
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2005 GMC Sierra
Today on our 2005 GMC Sierra, we'll be test fitting the Convert-A-Ball Cushion Ball Mount for 2 inch hitches with one inch rise or two inch drop rated at 14,000 pounds, part number AMSC2HD.Now to begin our test fit, we'll need to get our hitch height measurement. To do this, we'll measure from the inside top edge of our receiver tube to the ground. Now on this truck, that measurement is 20 and a half inches. Now keep in mind, that the measurement can change due to tire size, hitch style, or any other accessory which may change your vehicles right height so its a good idea to measure yours.We'll now slide the ball mount shank into our hitch, line up our hitch pinholes and install our hitch pin and clip.With that, our ball mount is secured to our GMC in the drop position. Now we'll go ahead and measure from the top of the ball mount platform to the ground with this ball mount. That measurement is 18 and a half inches.
Draw-Tite Ball Mount Review - 2005 GMC Sierra
Today on our 2005 GMC Sierra, we'll be test fitting the draw tite ball mount with 3 quarter inch rise or 2 inch drop rated at 6,000 pounds, part number 2923. Now to begin our test fit, we'll need to get our hitch hide measurement. To do this, we'll measure from the inside top edge of our receiver tube to the ground. Now in this truck, that measurement is 20 and 1/2 inches. Now keep in mind that the measurement can change due to tire size, hitch style or any other accessory which may change your vehicles ride height. So it's a good idea to measure yours. When outside the ball mount into the hitch, line up the hitch pin hole and using our pin and clip, we'll secure our ball mount to our GMC.
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2005 GMC Sierra
Today on our 2005 GMC Sierra we'll be test fitting part number AMSC2, the convert-a-ball cushion ball mount for 2 inch hitches, with 3/4 inch rise or 2 inch drop, rated at 10,000 pounds. Now to begin our test fit, we'll need to get our hitch height measurement. To do this, we'll measure from the inside top edge of our receiver tube to the ground. Now on this truck, that measurement is 20.5 inches. Now keep in mind that the measurement can change due to tire size, hitch style or any other accessory which may change your vehicles ride height. It's a good idea to measure yours. We'll now insert our ball mount into the receiver tube, line up the hitch pin holes and install our hitch pin.
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"