# 1
Brophy Pintle Hook for 2-1/2" Hitches - 36,000 lbs
This beefy hitch was perfect for attaching my low profile dump trailer to my f350.
I do like the strength of the product. The flaws were the actual bolt on the top piece broke off holding the locking pin first week (allen key bolt). I also have to spray or grease the top piece that opens and closes and the rain rusts the joint quickly and is almost impossible to lift up by hand. I would look to purchase another product here since the price is right, but am not happy with the day to day use of this hitch at all. I do not have a picture at the moment, but if I can, I will show some of the issues. Thanks.
# 2
Curt Pintle Hook with 2-5/16" Hitch Ball - Channel Mount - 20,000 lbs
So far it has been a very well built, and durable product. Pulling a 13,000 lb. trailer no problems.
I've had a lot of pintle hooks, and this is one of the best so far. I love the channel mount system, which is very convenient, making the height easily adjustable when hooking to different trailers or trucks.
# 3
Buyers Products 3 Position Pintle Hook Mount for 2-1/2" Receiver - 20K
Looking for a heavy duty mount for a pintle hook--this seems to be one of the highest rated mounts I could find. Need to add a rear tow hitch to our Rose Parade float chassis due to new parade rules. Easy to install, but did not come with a pin--need to purchase one separately.
# 4
B&W Tow & Stow Pintle Hook - 2-5/16" Ball - 2-1/2" Hitches - 10,000 lbs/16,000 lbs
I have purchased 3 of these hitches from etrailer. They hold up really well and provide plenty of flexibility when switching trucks and trailers. I really like the short distance from the truck to the trailer. This hitch doesn't extend that distance which would result in excess leverage when towing a heavy load. Very practical and worth the investment.
came with everything needed. easy setup. good instructions. shipping was extremely fast and customer service was great-keeping me updated throughout the delivery process. very detailed. would recommend to anyone. thank you!
# 5
Curt Pintle Hook Mounting Plate for 2" Hitches - 10" Shank - 14 Hole - 10,000 lbs
Previous customer, I purchase all the towing equipment for my sons demolition company. etrailer is always my first stop when I am tasked with finding needed equipment.....this because the site is easy to navigate and provides excellent information relative to capacity and fitment. Whether I am in need of electrical repair parts or hard towing components, etrailer has the right stuff at fair prices. A really great source for all my equipment needs.
Exactly what I needed to level pulling my military trailer. The pintle hitch bolted to the mounting plate within a few minutes. Now I can get into the back country with my FJ pulling a trailer made possible by the your pintle hitch/mounting plate Combination. Thanks
# 6
Buyers Combination Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches - 24,000 lbs
Always great quality products and top quality customer service. Etrailer #1 go to place for all my needs.
WORKS PERFECT!
# 7
Super Titan Forged Pintle Hook Plate for 3" Trailer Hitches - 25,000 lbs
Three days after I ordered the hitches they showed up at my door. We bought a new F-350 and needed some new hitch assemblies for the 3" receiver. Everything was well packaged and so well made we figure these hitches will last a lifetime and then some. The height adjustable Pintle Hitch is stronger than the truck and and the stout B&W Tow & Stow three ball is an excellent design. No disappointments here. etrailer is a one stop shop for our towing and trailer needs.
Very heavy duty part. Only complaint is that the mounting holes had to be reamed out to get them back to 5/8" the coating on this part is quite thick which is good from a protection point of view
# 8
B&W Pintle Hook Mounting Plate for 2" Hitches - 13" Shank - 14 Hole - 16,000 lbs
Bought so I could pull a big Pintle hook trailer with my f350. This reciever raised me up just where I needed to be
Good welds, nice paint. BUT. 2x2 receiver stock not welded square to bolt plate, so it sits crooked, visually by eye crooked. Mounting hardware pic shows nyloc nuts …nope. As I said, good build quality, so not one star.
# 9
Buyers Products 10 Ton Combination Hitch with Mounting Kit - 2-5/16" Ball - BH10 Series
Everything went well fast delivery
Very high quality. thanks
# 10
Curt SecureLatch Pintle Hook with 2-5/16" Ball - Bolt On - 20,000 lbs
Works great! Very heavy duty. I like the versatility of the hitch that functions as both a pintle hitch and a ball, yet gives up very little functionality
Works great. I have a hitch camera so when backing into the trailer the pintle touches the stops and your lined up perfect. The latch bar works really good also. I have only used the with a pintle hitch.
# 11
Curt SecureLatch Pintle Hook and Mount with 2" Ball - 2-1/2" Hitches - 20,000 lbs
High quality securelatch. I used it to pull a trailer full of hay and it held up great.
Works great! Very heavy duty. I like the versatility of the hitch that functions as both a pintle hitch and a ball, yet gives up very little functionality
# 12
Gen-Y Torsion Pintle Hook Mounting Plate for 2-1/2" Hitches - 16 Hole - 21K
# 13
B&W Pintle Hook Mounting Plate for 2" Hitches - 9" Shank - 8 Hole - 16,000 lbs
Bought so I could pull a big Pintle hook trailer with my f350. This reciever raised me up just where I needed to be
Great customer service and a great product. Delivered on time and as described. This is a nice heavy duty hitch that will give you just shy of 4" drop when when used with a pintle hook.
# 14
Curt SecureLatch Pintle Hook with 2" Ball - Bolt On - 20,000 lbs
looking forward to using this for skidloader trailer seems well built
Excellent product
# 15
Curt Pintle Hook Mounting Plate for 2-1/2" Hitches - 10-3/4" Shank - 8 Hole - 20,000 lbs
Previous customer, I purchase all the towing equipment for my sons demolition company. etrailer is always my first stop when I am tasked with finding needed equipment.....this because the site is easy to navigate and provides excellent information relative to capacity and fitment. Whether I am in need of electrical repair parts or hard towing components, etrailer has the right stuff at fair prices. A really great source for all my equipment needs.
The 30,000Lb pintle hitch bolted on this plate with ease...This plate has just the right amount of adjustments to suit different trailer/tow vehicle heights.
# 16
B&W Pintle Hook Mounting Plate for 2" Hitches - 15" Shank - 14 Hole - 16,000 lbs
Bought so I could pull a big Pintle hook trailer with my f350. This reciever raised me up just where I needed to be
Very difficult part for me to find. So glad etrailer could help. Over the phone service was excellent. Item delivered to my door in Canada in just 1 week. I have a future project and etrailer will be my “Go to” for parts.
What our customers are saying:
"very easy to shop"