# 1
Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer - Steel - 31" to 54" - 5,000 lbs
It is built to last. I'm a welder and all the welds look good. I am sure it will last a long time. The description of the tripod said it came with a pad lock to protect it from being taken. But it wasn't in the box. I called and was told it did not come with a lock and the description was wrong. So you will need to add a pad lock to your order if you purchase one.
Works greater
# 2
Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 4-Point Set
Super quick delivery, expected it in 7-10 days and got it in 3! etrailer as always is great. Thank you.
So far so good but still working on the installation. I had to fabricate a couple of brackets due to my 5th wheel configuration to get a rear sensor and front controller mounted but not a big deal. Over very pleased with quality of jacks. I did receive extra brackets (see picture) that weren’t listed in the material list and I don’t see where they would even mount. I will need to make a phone call about those
# 3
JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs w/ 58" or More Between Landing Gear
Great product. Really helped to stabilize my fifth wheel toy hauler. Very little movement when moving around inside the unit. Much more solid. Installation took about 2-2.5 hrs for both front and back landing. Instructions a little confusing at first but when you figure them out it's real easy. Very satisfied with this product and would recommend it to anyone looking for a more solid feel to their RV when set up.
These are great and made our small 5th wheel rock solid, I mean night and day compared to just landing gear and rear stabilizers. I did have to do some minor fabrication for both the front and the rear. The front was due to the spare tire being mounted under the front of our rig. Also the instructions really suck as do most Lippert components instructions. Way too many words that don't really seem to be coherent, seems like just a few words and some good quality pictures would be more helpful.
Still love these, space saving and rock solid.
Shane M Rodenberg - 04/14/2021# 4
Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs
Awesome product. Surprisingly easy install. Fit right in factory brackets on a 2018 voltage triton 3551. Love the dual motors with individual controls. Hardest part of install was having to leave to go buy some 8 gauge connectors to connect power from both motors to power from trailer. The factory landing gear was rated at 6000 lbs. now with the 12000 lb landing gear the motors don’t sound like they are straining.
I have a 2013 Heartland Toyhauler, weight about 12,000 pounds, we added large solar panels on the roof thus have a large battery bank running across the front, adding an extra weight at 800 pounds. The factory 6000 pound jacks where having a difficult time lifting the trailer off the hitch, straining. These new jacks motor on each leg, no problems lifting, there rated at twice the load rating at 12,000 pounds. We removed the front cover section on the front of the 5th wheel in order to gain access to the jack locations. The Jacks fitted right in where the old ones went. I made up a small box to mount the two switches, with an long cord, that connect and sits in the side lockable basement storage. So no outside switches, added security, there no way to move the jacks, unless you unlock the side basement compartment, plus i added a master shut off switch so there's is no accidental activations. I going to be building a custom enclosed trailer this year, and i be using these jack, for sure.
Fantastic product, works very well no issues
BRAD ALGAR - 02/20/2020# 5
Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 6-Point Set
Super quick delivery, expected it in 7-10 days and got it in 3! etrailer as always is great. Thank you.
Let me say this to start, this system is AWESOME!! If you do not have a leveling system on your camper, this one works very , very well. I will say, the install and the learning curve takes time and is not too hard, but it's not super easy either. Once I got the system in place, and understood how to use it, the rest was a piece of cake. Take your time on the install and get help. The parts are robust and heavy, so two people make it much easier. Have sharp drill bits to drill the attachment holes. Wiring is super simple, but take your time and make sure you get all the connections good and tight and secured well with zip ties. The system requires a good strong battery, so make sure your battery is in great shape and you will not have any issues. Get the Lippert app also, it is very helpful. I love it now, when I pull my 2006 Keystone Raptor 5th wheel toy hauler into a campsite, I hit a couple buttons and the longest it has taken to level my unit is 2 minutes and 30 seconds. I love it! It puts the camper at the same level every single time, which is awesome. No guessing, no driving up and down on blocks, just push a button and walk away until the camper is perfect. Would I do this over again you ask? Absolutely. Awesome system!
Still loving the system. The only issues I have ever had, is when I the unit off for service and someone does not turn off my main battery switch and they drain the batteries down, the system will not operate until you install a jumper box or charge the battery up to 12 volts or higher. Not a system flaw by any means, just something to be aware of. So far it has worked great. Id do it again in a heartbeat.
Robert B - 06/01/2020# 6
Lippert High-Speed Power Stabilizer Jack - 30" Lift
We ordered two of these to replace the ones we destroyed. Once we learned that we didn't have to remove the riveted panels under our 2018 Airstream Classic, it was an easy job for us to complete ourselves. The bolts on the Airstream are secured directly to the frame, and we didn't need to add the nut on the other side. We used tape to holt the bolts in the order we removed them so we knew they would fit back in the holes from which they came.
Did come with switch and circuit breake. I will keep for spare. No instructions of any kind and link on item does not exist. There was a link to a manual jack when I first looked. Simple enough to install without them. Did find color code and wiring diagram. Arrived within 3 days and only slight damage to 69 lb box. Still don’t clearly see how it will level unless RV is already mostly level. One motor, a split screw and assembly floats left/right in the top mounted track. Even though the legs can compensate for uneven ground at the lift, it will just elevate the RV as the same level as where it started. It doesn’t autolevel. Only took 5 minutes to bolt up as I temporarily wired and used the switch to raise into position. Running the wire and installing the electrical was more involved.
# 7
Brophy Cable Camper Jacks - 67" Max Lift Height - 3,000 lbs - Qty 2
Great product and delivered when promised. Lifted my camper shell off my 2005 F350 which had an 8 foot bed with no problem. I could have done it alone but had another person help to speed things up.
So I have owned my CJ7 4 Brophy camper Jacks for a year. Throughout this time, they have been outside exposed to the elements continuously, and they look and operate as if they were straight out of the box. I've been using the camper jacks to renovate my camper, and I couldn't have done this project without them. I am so happy I bought the camper Jacks it was the smartest purchase I've made in a long time, and etrailer.com was the best place to purchase them.
# 8
Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2
if I had to rate this upgrade in difficulty one being the easiest five being the hardest, it would be a one. Super simple. Take the nuts and bolts off your old hardware and install the upgrade in its place. I read some of the reviews were people were annoyed with the counter clockwise rotation and the bolt sticking out too far. I really didn’t see a problem with either. I know you’re not supposed to use a drill to extend and retract these but I always have. I suppose as long as you’re not torquing the heck out of the adjustment screw you shouldn’t have any problems. I always put a small flat 2 x 6 piece of wood under the foot of each one of these. It seems to add quite a bit of stability.
Perfectly! Keep em clean with a coat of lubricant & theyll serve you well!
Steven - 11/09/2020Slow on the shipping, they waited a day before sending it out. Really should get with someone about how to properly pack up heavy items, one of the boxes broke open and one of the jacks was poking out of the shipping box. Already got them on my 1974 Avion, and they work great. Hopefully they do not bend like the originals did. Nice heavy construction, too bad the crank handle has a cheesy grip on the inner hand hold. Used my Dewalt drill to power them down and back up without issue though. Also do not forget to lube up the jackscrew with some grease. I like to use Reese teflon ball grease, since it is waterproof and lasts a good while. Wish they offered a kit to motorize them as I prefer this type of jack to the drop arm style. Lifted my 8000 pound Avion off the ground without issue with the help of the wife on the other side
# 9
Ultra-Fab Electric A-Frame Jack w/ 7-Way Plug - 18" Lift - 3,500 lbs
The Jack works fine' Love it
Thing craped out 3 months
# 10
Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2
Outstanding product.....easy to install. bolt pattern aligned easily with my predrilled holes and went on in a snap.
After installing these on my camper, when I went to jack my camper up, the welds had broken that stops the screw and my trailer would not jack up during to the cranks just spinning. Fortunately I had hydraulic jacks to help level my camper.
# 11
Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4
These Jack's made both building and positioning my teardrop onto the trailer bed easier. At campsites they easily level the trailer. So yes I'm happy.
They are holding up just fine and doing their job both at campsites and at home.
Robert E - 06/08/2020# 12
JT's Strong Arm Jack Stabilizer Kit for Travel Trailers
Great product. Really helped to stabilize my fifth wheel toy hauler. Very little movement when moving around inside the unit. Much more solid. Installation took about 2-2.5 hrs for both front and back landing. Instructions a little confusing at first but when you figure them out it's real easy. Very satisfied with this product and would recommend it to anyone looking for a more solid feel to their RV when set up.
very happy and satisfied with them as I said earlier everything holds true very satisfied.
James H - 06/28/2020First, let me say the service I received from etrailer was superb. Now that’s out of the way, the very mixed reviews on the JT’s Strong Arm product is very deserved. I have not gotten to use them yet so I am just commenting on the installation. I’m not the best mechanic in the world but was trained by USAF as an auto mechanic at the end of the Vietnam conflict so I do have some experience. The directions are nearly useless, frankly. I would rather have had them tell me in general terms how they operate and let me figure it out on my own. Once I put away the instruction sheet they were easy to install. One tip I’m glad I read in reviews, and not mentioned in the instructions, watch where your electrical and gas lines route along the inside (sometimes hidden) part of I-beams and C-channel. Yes, you should always do that when drilling, but when frustration from reading bad directions gets in the mix it’s even more important. That one tip saved me time, money and possibly injury. The “self-tapping” bolts did not self-tap, either. I tried running them in by hand and with a cordless 1/4” impact. Both times the self-tapping just stripped threads off which meant I had to go buy more ny-lock nuts. I got a good education on how scissor jacks are made, too. Not from the instructions, but from a mistake I made putting in the swing bolts and letting the center piece of the jack “gearbox” come loose. That could come in handy in the future. I also read that someone ruined a scissor jack trying to move the jack up or down with the Strong Arm T-handle tightened. I am capable of learning from other’s mistakes so I am putting 3/4” silicone vacuum hose caps over my jack so I can’t run them up or down without first checking the T-handle. That should be included in the kit IMHO. The T-handle should also have a tether since it does not have any kind of thread-lock to keep them from working loose as you drive down the road if you don’t re-tighten them in the stored/up position. I will update my review when I have a chance to use them.
After one year and multiple uses of the JT Strong Arms I have to say the frustration from their poor installation documents may have been worth it. My trailer is rock solid now. Everything else I wrote stands and the caps I use on the jack has saved me from ruining jacks. The tethers to the T-handles have saved lost handles, too. Overall, they are a good addition to my trailer.
Gary - 05/19/2021# 13
Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 2
They work just fine! Replaced an old one that got run over...
They work just fine. Doing what they were built to do!
Blaine - 07/21/2021# 14
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black
Product was conform to description, easy to install and work great, I completed installation in less than 30 minutes.
My Stromberg Carlson power jack is still working well. As for all my belongings I take good care of it, that should make it work for a long time I hope...
Yvon - 03/21/2019Installation was very simple and the unit works great so far. Etrailers pricing is excellent especially during tbese times and shipping was fast. Will definitely order from them again
# 15
Lippert Scissor Stabilizer Jacks with Handle - 30" Lift - 10,000 lbs - Qty 2
Great item easy to mount because of the pre drilled plate.
Added these to stabilize my Forest River V-Lite 36' camper with 3 slides. With the existing Lippert electric stabilizers, the camper rocked severely when someone walked around in it. These jacks were just the ticket. I use them about 8-10' in from the ends on the frame. The array of holes on the jacks allowed me to angle them at 45 degrees. This helped the swaying and rocking. Love what they have done for us.
# 16
Ultra-Fab Slide-Out Supports for Motor Homes - 16" to 28" - Qty 2
We had so much trouble with the heavy slide out on our travel trailer going out of adjustment .. The trailer spent more time the first two years in the dealership shop or another rv shop than we had it at home.. When we finally got it repaired for the last time my wife checked the internet and found these slide out supports.. We use these everytime we open the slide out at home or camping in the forest or rv park .. And we havent had anymore trouble .. Wish we found these two years earlier .. Thank You fir a great product ..
These supports are the best .. We use them everytime the we expand the slide out and they are still holding up .. I see more and more of these advertised but they look so flimsy compared to these we have .... Thanks for a great product ..
Brooks - 02/14/2019# 17
Lippert Electric Landing Gear Set - Weld On - 37" Lift - 6,000 lbs
Received the Kit in about four days (5 Stars for etrailer). The shipping container was severely damaged (2 stars for UPS), but at least it arrived. Did not appear any parts were missing. I ordered this kit because it was less expensive for the complete kit then to replace both landing gear legs separately. I left the 5th wheel attached to the truck and removed the old landing gear, gearbox, and motor prior to the arrival of the new system. Keep all your parts. The new kit arrived and was very easy and straight forward to install. However the tubular steel expansion rod that connects both landing gear legs was too short. I had to use the my old connection rod. Also the spacer used for the inside of the large side of the connection rod was not included with the kit. Had to use the old spacer in the old connecting rod. I used my old landing gear foot plates and pull pins on both landing gear leg extensions. Once installed, the kit worked flawlessly. I placed red marker tape on the landing gear extensions so not to top out the legs when lifting. Again save all your old parts.
After using the landing gear for over a year on several trips, the landing gear, motor, and gear box have Worked flawlessly.
Cal - 03/03/2022Package was very heavy. It was so heavy that ups damaged the box and lost some of the hardware.This should have been sent in at least 2 boxes from the weight of this item.
# 18
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs
After talking to the experts at etrailer they helped me find a complete landing gear set (2 landing legs, feet, motor, gear box, switch, connecting arm, crank) to replace my original 2005 Jayco 5th wheel that I could not get OEM replacements or parts for. we settled on the LG-1. it was almost o perfect fit. I have never replaced landing gear before. I was one of the easiest projects I have done in a long time. The only modifications I had to do was cut a gap for the new gear connecting rod and manual jack crank arm to go through. It took about 5 minutes for both. The whole project took about 1.5 hours. Everything works perfectly.
These jacks were a direct bolt-on replacement for the Atwood jacks on my fifth wheel. One year later, they are working fine. When considering this purchase, it was not clear if the landing gear would fit or if welding would be necessary. I called Stromberg-Carlson and they sent the technical drawings right away. Answered the question immediately. I will never forget their fine customer service.
# 19
Brophy Cable Camper Jacks - 57" Max Lift Height - 1,000 lbs - Qty 2
Great product and delivered when promised. Lifted my camper shell off my 2005 F350 which had an 8 foot bed with no problem. I could have done it alone but had another person help to speed things up.
Is not designed for a simple camper top. The lift brackets are only angle iron and don't reach beyond the truck sides. Had to use 2x6 boards to make it work. Only works with tops that "hang over" the truck sides.
# 20
Ultra-Fab Slide-Out Supports for Motor Homes - 26" to 47" - Qty 2
Our initial order was not delivered by the fault of UPS. One Phone call to James At etrailer and he straightened it out and got us another one mailed immediately. Wonderful to deal with!
very happy and satisfied with them as I said earlier everything holds true very satisfied.