# 1
Swagman Truck Bed Bike Rack for 2 Bikes - Fork Mount - 9-mm Skewer
I used 2 inch square tubing cut the length of the tie down support bracket in my 2007 Honda Ridgeline and secured with a stainless bolt and wing nut, use a large enough washer to cover the diameter of the supply hole in the Honda Ridgeline bracket on the truck. A couple of notes: Be sure to use something as a cushioning gasket to insure a snug fit and to protect your truck lining. I used rubber or foam exercise mat cut to the same as the aluminum square tubing. Use a washer that a combination of hard plastic and metal to avoid the corrosive effects of dissimilar metals in contact with each other. last: My 26" full suspension bike fits, but I have swing it to one side slightly before i close the tailgate and lift the bike up and slide it down....It's a very snug fit but the suspension adds pressure to the tailgate and its works out very well. Or you could just use a tailgate extender.
Referring to special mounting instructions if you have a bed liner: (line #3). I do not have a bed liner, but I do have a molded plastic cap on my bed rails ('04 Ford F350). The first install over the plastic cap the locking pin or pin as called out in line #3 was nowhere near making contact with the metal lip of the metal bed under the plastic. What I did next on the second and final install was remove/cut away the plastic on the inside of the bed rail to allow the vertical portion of the "L" mounting bracket (Fig 4) to contact the metal bed. The locking pin is now at a position almost where it would protrude under the metal bed lip if I would remove the rest of the plastic under the horizontal portion of the "L" mounting bracket, I did not do that. After cutting a notch in the metal rail to accept the pin, the pin barely flushes out to secure the rack. A 1/4" longer pin would take care of this problem. One other thing that was not addressed in the install instructions was if you have a full size pick-up bed you are likely to attach the passenger side fork mount (Fig 2) to the right of the extension tube locking mechanism. The extension tube is a smaller diameter, so you will have resize the fork tube clamp (Fig 1) for the smaller tube. I can't explain how to do it other than it's a Chinese puzzle.
# 2
Thule Hitching Post Pro Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches
The good: I like the way the bikes are held in and the ability to add the upright adapters to the bike frame holders. The straps are quality too. For a jeep with a spare tire, this is the perfect length to clear it. This rack is 5 stars from the bike holders to the base of it. The bad: the 2"receiver adapter and bolt are insufficient. I wish they made this in a solid 2" hitch. The entire setup is held into the receiver by a very short bolt. It only goes about half way into the receiver tube. So your hitch is only "secured" on one side. A hitch pin or bolt should go through the receiver tube completely imo so it can be secured on the other end with a retaining clip or nut. Because this only goes in the one side, the entire weight of the rack plus bikes are held tight to one side of the receiver by the undersized bolt and washer. A few bumps down the road and that bolt loosens. Now instead of distibuting the weight of the rack and bikes on the receiver and post, it's completely up to the bolt to keep you from losing the rack. The bolt threads get damaged too. I took this down a dirt road and nearly lost everything. I had to buy my own bolt with hd fender washers and lock washers to correct this. Thule should've provided this from the start. The current short bolt design where only one side of the receiver secures the rack is unacceptable. This rack is 1 star at best for the connection to the receiver.
Hitch pin broke before I got it. Looks like a poor design for the locking pin, they might want to consider a different design. I got a 3/8 shear pin from Home Depot to replace and it works great. Bike rack is great!
# 3
Inno Velo Gripper Bike Rack for Truck Beds - Clamp On
Using the Grippers for carrying 2 ebikes, weighing 55 & 75 lbs. I know this is above the rated bike weights but so far they have performed well. My short bed keeps the 75# bike pretty well locked in front to back so that may help.
I am disappointed that they don’t hold my bikes better than they do. I still have to strap them down so they don’t fall out. They are pretty expensive for what you get. I need to modify them so they will actually work. Not really what I was expecting to do, but I need to so my bikes are secured.
# 4
Swagman XTC2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
First-time rack buyer / owner / installer. The rack arrived in a timely fashion, maybe a day or 2 ahead of schedule. It was well packaged. I’m LOVING this bike rack. It was easy to put together and to mount on my new Honda Passport. Thus far, no squeaks in my 2” receiver. Hardest part of initial set-up is figuring out the best way to position two bikes. Trial & error and some patience. The directions weren’t clear as to where the 2 left-over screws went. I found the answer in another review and have posted a pic in case others have the same problem (photo with pen pointing at screw). These screws go in the underneath side of both of the folding arms. They appear to keep the wheel wells from sliding off in case in you drive with an empty, un-folded rack, and forgot to tighten down the wheel wells. The folding arm push / pull pins can be difficult at times. I coated the tips with some lube. That and a little jiggling seems to solve that issue. I guess it’s better for the pins to be snug vs popping right out. I added a small Master lock to the hitch pin (in lieu of the provided cotter pin) as a theft deterrent. I read that a 3/16 shackle lock will fit into the bike clamp down arms to also act as a deterrent. I had an old 3/16 lock that did snugly fit and appeared to be locked. HOWEVER, I yanked on the lock and it came open as there isn’t quite enough clearance for the shackle to lock. I discovered that longer 3/16 shackle locks are hard to find. Have attached a photo of the lock that actually fits and works (Ace Hardware). One lock on the upper clamp down arm will secure both arms as the lower arm can’t be removed without removing the upper arm. The clamp down arms appear to be coated to prevent damage to your bike. I’ve tried a simple rag and ultimately settled on pool noodle pieces as a precautionary measure. I CAN NOT open my tailgate (regardless of whether or not the rack is fold up and in the bike carry position). If that’s a concern for you, then spring for the more costly titling version. My back-up camera still functions.
The Swagman XTC-2 platform bike carrier arrived very quickly from etrailer and in good shape, the actual carrier box is inside another shipper box, which I'm sure helped with its condition. Assembly was relatively quick and painless, even though the instructions could be a little more thorough. Installing the carrier on the back of our Jeep Patriot also was quick, it helps to have an extra ratchet & 3/4" socket laying around for just this purpose. Installing the bikes takes a little patience and trial and error the first time you try and put them on the carrier. It's easy enough to adjust the wheel holders to fit the wheelbase of your bikes, but for us at least, the challenge was trying to swing the vertical support bar up into position after putting on the first bike (closest to the Jeep). We couldn't angle the bike enough toward the Jeep to have the bar clear the bike. We learned that the easiest way to secure the first bike was to remove the ratcheting frame hooks altogether, put the bike in the carrier, swing up the vertical support bar, put in the pin, and then slide one of the frame hooks down on the bar. The outside bike is much easier because you can set the bike in the carrier at whatever angle you need, not being limited by the back of the vehicle. One thing we did to protect the bike frames was to use some foam pipe insulation as cushion between the frame hook and the frame (see pictures). Once you get a system for installing the bikes, it is very quick to load/unload them. The rack seems to be well made and doesn't wiggle excessively when traveling. All in all a good product for a good price, would definitely recommend it for anyone looking for a platform bike carrier.
# 5
Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount
This bike rack works great for our 2 Lectric 2.0 e-bikes. We mount it on our 2019 Honda Ridgeline. It folds up nicely when it’s on the truck and we are using our bikes. The locking mechanisms work well also. I contacted support for a smaller hook arm to clamp B over the bike frame. They knew exactly what I needed and shipped it - no problem.
I've been using this bike rack alongside a trailer hitch I got here for my small car (chevy bolt ev) and it was exactly what I was looking to get to haul around my fat tire mountain bike bike. Sometimes I throw two bikes on there (either an e-bike, slightly heavier at 60 lbs, or a 2nd mountain bike) and it's perfect.
# 6
Thule T2 Pro XTR Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount
Great product, great company to do business with. etrailer is the best. Friendly, helpful and they made sure the bike rack was shipped immediately and it was delivered on time.
The quality of the rack is very sturdy and well built. I needed a rack that has a 12” spacing between wheels do to the baskets on each bike, and this rack delivered that. The issues I have with this rack are: I have a GMC Yukon suv and with the rack mounted I have to lift my two Lecritc 2.0 e-bikes, at 60 pounds each up over 24” to get it mounted. It sure could use ramps, which I know it did not come with. The clamp hold down does not work with fenders on a bike. It does not clamp very well on the cross bar (male and female) type do to the width and the angle of the cross bars. When clamping in front of the front fender makes the bike very unstable, and will require additional strapping and tie downs to secure the bikes. It claims it is for e-bikes, but only if it has no fenders. Nice rack, just not for me.
# 7
Swagman Patrol Truck Bed Bike Rack for 2 Bikes - Fork Mount - 9-mm Skewer and 15-mm Thru-Axle
rack tends to work itself loose from bed walls during long trips. had to strap down with ratchet straps to keep from moving. locks only work at a specific angle -- wish the manual had said this because we couldn't lock our bikes until figuring it out.
Excellent Customer service and help for this product. Thank you Carol and Neil your the best.
# 8
Curt Clamp-On Bike Rack for 3 Bikes - 2" Ball Mounts
This is the best product online. I had to do a few adjustments to make room for the clamp on the trailer hitch. The particular ball hitch I had had a reinforcement welded to the ball which I had to have a piece taken off. Once it was filed down the clamp worked like a champ. Now I have a $200 bike rack that I purchased a year ago that is obsolete. The product arrived early and in good shape. I would definitely buy this bike rack and use this company again!
Needed a bike rack for our cross country RV trip last year for three bikes. I did not want to put anything on the car we were towing and the Curt clamp on bike rack fit our situation perfectly. The rack was easy to install and the bikes were safely carried 5956 miles over 25 days with no problems.
# 9
Swagman XTC4 Bike Rack for 4 Bikes - 2" Hitches - Frame Mount
So far I’ve just assembled it and took a quick test drive around the block. My initial thought is this thing is perfect. It’s super sturdy and easy to use. My only gripe and it’s not fault of the rack, but it’s heavy…
If you've done any research or read any of the other comments on either this rack, or this seller...rest assured they really are as good as everyone says! I ordered my rack on around 4pm est on a Friday afternoon and within an hour I received an email that said they have shipped my product AND upgraded to priority shipping. Can't say enough positive things about the customer service! When the rack arrived, it took me a little over half an hour to get it set up. Probably would e been faster if I were even slightly mechanically inclined (or if didn't I didn't have to borrow a socket wrench from my neighbor). We finally had an opportunity to load up the bikes and head out for a ride today. As others have said, the first time you load up your bikes, it's kind of like a puzzle to get them situated. Took about 15 minutes. This rack is awesome! Very sturdy and the bikes were very secure. Only racks I have had in the past were rooftop fork mount racks. This is so much easier! On e we got to the trail (over an hour drive) getting the bikes off was a piece of cake. Afterwards, it was time to load them back up and it was less than 5 minutes to get them all on and ready to hit the road. There were other 4-bike racks on the website, but this one had enough great reviews that I felt comfortable making the purchase. After the fact, I'm very glad I did! I can't imagine the $800 rack can be that much better than this, and I highly recommend this for anyone looking for a 4-bike platform rack. I will definitely recommend this rack and etrailer.com to everyone I know.
# 10
Yakima FrontLoader Wheel Mount Bike Carrier - Roof Mount
Overall I am happy with these bike carriers. They mount to the racks over the bed of my Tundra TRD Pro. Installation is simple. I think they could be just a bit sturdier because there is just a bit of wobbling when driving on bumpy roads but I'm not too worried about them coming dislodged. Take note that although they come with a cable lock to attach the bike to the carrier, the key is sold separately.
Very good product. It holds the bike securely on the roof without contacting the frame. It is easy to adjust from my road bike to my 29er mountain bike. Our drives are all relatively short, so I like that I do not need to remove the front wheel to lock in the bike. It's also nice that the SKS locking system allows me to use the same key for this rack that I use for my Yakima roof box and hitch rack. This is my first roof rack and I chose this route for a couple reasons. Some of the roads we travel to get to our trail heads are a bit rough and with a roof rack I don't have to worry about bottoming out a hitch rack hanging off the back of the vehicle. Also, it takes up less room in the garage. Our vehicle is a 2000 Jeep Grand Cherokee with an additional 4 inches of ground clearance. That makes it a bit of a reach for my 5'4" wife, so we take our two-step along to help her. This is my third time purchasing from etrailer, and each experience has been very good. They are a very customer service oriented company. I really appreciate all the additional information they provide on their products, especially all the videos they produce to aid in reviews, assembly, and use.
# 11
Softride Shuttle Pad Tailgate Pad for Full-Size Trucks - Up to 6 Bikes - 61" Wide
The fit for a 2014 Ram was spot on, no issue with the wide style tailgate top and the access flap for the tailgate handle lined up perfectly. Material is durable and easy to clean, the only thing holding it from a 5 stars is if it had the padded dividers on top to keep the bikes separated. But for the price, the fit and finish was exceptional, great value !!!
The product review/installation video helped me make my selection. I selected the full size pad for 2001 Silverado 1500. Installs easily, fits nicely, flap in pad is positioned for easy access to tailgate latch.
# 12
Thule GateMate Pro Tailgate Pad for Full-Size Trucks - Up to 8 Bikes - 60" Wide
etrailer has been great in the past and I will order from them again. This experience was mediocre because they advertised free 3 day shipping through a google search for this product. After paying I was notified that it would take longer. I needed the gate mate for a weekend trip and could have gotten it through [online vendor] for the same price, quicker. Not a big deal, just be aware.
Always impressed with etrailer. They have an abundance of knowledge and are extremely responsive. Highly recommend!
# 13
Kuat NV 2.0 Base Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Matte Black
I've taken this rack all over New England on the front of my Dodge Ram 3500 pick up truck with a truck camper. I had no idea it was possible to love a bike rack so much. After one drive I didn't ever worry about it again. So nice that it locks up when I am camping or taking a quick stop for food on the road. So glad I bought it from etrailer. They totally help me pick the perfect rack for my challenging set up.
Still very new, but what an awesome bike rack! Assembly was a snap and the rack is rock-solid when you secure it to the hitch receiver. etrailer was amazing too - excellent communication, price and fast, free delivery. Overall I am extremely happy with the rack and service!
# 14
Swagman Dispatch Bike Rack for 2 Bikes - 2" Hitches - Frame Mount
Seem heavy duty. Have not used it to transported my bikes. The only difficulty I had with the assembly dealt with the wheel cradles. They are not labeled left and right, front and rear. After installation, I discovered that one side of the cradle is higher ,viewing your videos I noticed that you put the higher end on the outside of both wheels. The aventon bikes weight 38 pounds with their battery removed. And this rack is rated at 45 pounds per bike. Therefore I think this rack will be able to transport my bikes safely on my Subaru Outback and my Forest River motorhome.
Excellent bike carrier for the back of our travel trailer. Very stable. We lost a bike once and now we can travel, stress-free, knowing our bikes are secure.
# 15
Thule Insta-Gater Pro Truck Bed Bike Rack - 1 Bike
Linda and I recently ordered two Aventon Pace 500 NextGen E-bikes from [bike store] in Madison, WI. Not wanting to just toss our expensive new bikes in the back of the p/u when they arrive next month we promptly ordered the Thule Instagator from etrailer. My prior experience with etrailer came as a recommendation from a friend. I was able to do quite a bit of the research on etrailers website, the demonstration video extremely helpful and we placed an order. The racks were in-stock, shipped promptly, etrailer providing a very nice tracking link that included pics of the staff involved in processing the order and a map of the route all the way to delivery. Absolutely 1st rate service. The racks showed up in perfect condition about two days after placing the order, exactly as promised. We are very pleased with etrailer, will most certainly be ordering from them again and recommend this company w/o reservation. Nice job etrailer!
I bought two racks to transport my ebikes. The tires do not fit in the rack. the cradle that holds the tire require to be wider. I need to return them. please assist me in this matter. thank you
# 16
RockyMounts MonoRail Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount
At age 75, I have purchased many bike racks over the years…..this one has no equal in loading and unloading…
This rack is really, good. The only thing i add to make it better is small strap that holds the front wheel to the front wheel bracket. I never had a problem with it, but i like to make sure it is secure. It is a solid bike rack and worth every penny. I would buy this over the Kuat version any day.
# 17
Swagman Chinook Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
Truly grooving on my wife's new Swagman Chinook bike rack. She wanted to be able to transport her nice road bike easily without throwing it in the back of her car, and since a roof rack is out of the question, this Swagman model fit the bill perfectly. It arrived quickly on the anticipated date. Kudos to etrailer.com for the email updates to keep me informed of my purchase. Within one hour, it was installed on my wife's 2014 Mazda3 hatchback. The Swagman is heavy and solid, which is reassuring as it makes me feel confident that it will keep the bikes secure. It also makes me feel like I got my money's worth. A ratchet wrench and Phillip's head screwdriver were the only tools required for the easy install. I did my research before purchasing the Chinook model as I was also eyeballing a very similar Thule rack that was slightly more expensive. I spoke with an etrailer.com expert who gave me the lowdown on both models. Ultimately, the Swagman won out because it has a smaller 'footprint' while extended or folded up ... and also can tilt away from the car for easy access to the hatchback area. Very convenient! FYI: Mazda doesn't make a trailer hitch for the Mazda3 as it's a small car with a small engine and has no business towing anything. Thankfully, the Curt company makes an aftermarket frame and trailer hitch that fits the Mazda3 hatchback perfectly with no drilling. Stupidly, I purchased it from another online company thinking I was getting a good deal. Turns out etrailer.com had it for less with FREE shipping. Oh well ... live and learn. Now I know that etrailer.com is one-stop shopping for bike racks AND trailer hitches. (Full disclosure: I had the garage down the street install the frame as it's easier with a lift) Only snafu: the shipment contained an extra set of keys that I assumed was for the hitch bolt lock (there was also a set of keys on the bolt itself). I spent 15 minutes using those keys trying to figure out how to remove the lock from the bolt to install it on the hitch. The keys just wouldn't turn in the lock. I called etrailer.com and Kevin told me to try the other set of keys ... and they worked. So an extra set of keys came with it that did absolutely nothing ... weird! Obviously, I can't speak to the longevity and durability of the Swagman Chinook 2 Bike Platform Rack as I just installed it. What I can speak to is the sturdiness of it, the ease of the installation and my complete satisfaction with the good folks at etrailer.com.
I ordered the Swagman Chinook 2 Bike Platform Rack on line from etrailer and so far have been very satisfied. The bike rack was delivered in less than a week. Unpacking the rack and assembly was fairly straightforward. I have read some reviews that complained the assembly instructions were a bit vague. I didn't have a problem but can see where others without a mechanical background get confused. The rack is very sturdy, but there is some side to side play in the tilt mechanism. I'm not sure this can be avoided with a rack that folds down. Installing the Curt trunk stabilizing strap takes most of the sway out of the rack. Installation is fairly easy and quick. It takes me 6 - 7 minutes to install the back on my hitch, and to install the bike and be ready to drive away. That seems reasonable to me. So far I've only loaded 1 bike. I've included pictures of my installation on a 2014 Mercedes Benz E350 sedan. Clearance between the bikes, the rack and the car are good. With the bike loaded in the inside, most forward position, I have 6" clearance between the pedal and the bumper. With the bike removed, the center support folded flat and the rack folded up in the storage position, I have 4" clearance between the closest part of the bike rack (the fold down hinge assembly) and the back bumper of the car. I am able to open the trunk of the car without removing the bikes or using the tilt feature, but I do have to remove the stabilizing strap first. Overall, I'm very pleased with the bike rack and think it will serve me much better than my old strap on rack. Since the weather has been cool since getting the bike carrier, I haven't taken any long trips to give it a real workout.
# 18
Curt 2 Bike Platform Rack for Fat Bikes - 1-1/4" and 2" Hitches - Frame Mount - Tilting
Everything was shipped correctly and in good condition!!!...I would purchase again on the future !!!
Hauling carrier and was assemble on May 20th. Assembly went fairly well according to the instructions. As yet have not hauled my ebike but will do so on May 30th.Unit is fairly heavy to handle but I am sure necessary to handle two heavy bikes.
# 19
Hollywood Racks Truck Bed Bike Carrier - Fork Mount - Bolt On
The Hollywood Racks Truck Bed Bike Carrier - Fork Mount - Bolt On, is just what I was looking for to be able to build a bike rack for carrying one of my bikes on my motorcycle. It was easy to mount and it holds my bike in place while riding on bumpy dirt roads, city streets, highways and even when I hit some twisty country roads. It's really easy to load and unload my bike when I get to where I want to ride. I use a velcro strap around the quick-release and the fork arm as an added safety as well as a couple tie-downs from my bike handlebars to my motorcycle passenger pegs to help distribute the weight on my rack. If you want to build your own DIY bike rack I totally recommend the Hollywood Racks Truck Bed Bike Carrier - Fork Mount - Bolt On.
Love this product! I built a great bike carrying system for my F-150 using two of these fork clamps. They are easy to install and extremely well made. No more tangled bikes and lots more room in the bed for other stuff! Best way to go for a nice bike rack system. Thanks, Phil T.
Yakima Roof Bike Racks Review - 2021 Ford F-250 Super Duty
Hey, everybody. Welcome to etrailer.com. I'm Bobby, and today we're taking a look at the Yakima HighRoad Roof-Mounted Bike Carrier here in the bed of our 2021 Ford F-250. So obviously this isn't gonna be our only way to actually mount up our carrier here. We do have it in the bed of our truck, and I highly suggest finding yourself a bed rack system to go ahead and actually utilize it here in the bed of your truck. And why I say that Well, obviously our cab is pretty tall and it's gonna take a pretty big effort to have to get on top of it over and over again, let alone getting your bike mounted up and then taking it down.
Thule Truck Bed Bike Racks Review - 2020 Ford F-250 Super Duty
Hey guys, John here from etrailer.com. Today, we have a 2020 Ford F-250. We're going to be taking a look at the Thule GateMate Pro tailgate bike pad.This is an alternative to just tossing our bikes in the truck bed, or installing a bike rack in our hitch. The benefit of using this, as opposed to just having our bikes standing in there on their own, is that this is going to hold them a little bit more secure. They're not going to Jostle around as much. Plus, it's going to keep them more organized.
Swagman Pick Up Truck Bed Bike Racks Review - 2018 Ford F-250 Super Duty
Speaker 1: Today on our 2018 Ford F-250 Super Duty, we're going to be test fitting the Swagman pick-up truck bed mounted 2-bike rack, part number S64702. The Swagman pick-up, straight out of the box, can carry up to two bikes in the bed of your truck. Now you can purchase an additional fork block mount to make this a 3-bike rack, if you have the space.This bike rack is good for the occasional use. Whether you want to take your road bikes out for a spin, or if you want to take your mountain bikes to the top of the trail. This is also good for people who don't necessarily have bike racks, or necessarily want to purchase bike racks for their hitches.This features a telescoping arm, which enables it to fit a wide variety of truck bed widths. This does install easily, and comes with some security features as well.
SeaSucker Falcon Truck Bed Bike Rack Review - 2018 Ford F-250 Super Duty
Speaker 1: Today in our 2018 Ford F250 Super Duty, we're going to be test fitting the SeaSucker Falcon Truck Bed Bike Rack for fork mounts, part number 298-BF1002. The SeaSucker Truck Bed Bike Rack is a fast and efficient way to carry up to one bike, by its forks, to either the top of the trail with your mountain bike, like you see here, or just heading out with your road bikes as well. This also works with bikes with disc brake adapters, also. Most people are going to be apprehensive about the fact that this uses a suction cup mount to stick to the back of the glass here. As you can see, shaking it back and forth, this is not going to go anywhere while you're traveling.It does grip it by your fork mounts with this 9-mm skewer at the front here. It just simply clamps into place, and you're good to go.
Swagman Patrol Truck Bed Bike Rack Review - 2018 Ford F-250 Super Duty
Speaker 1: Today on our 2018 Ford F250 Super Duty we're going to be test fitting the Swagman Patrol 2 Bike Rack for truck beds. Part number S64701.The Swagman Patrol 2 enables you to carry up to two bikes by their fork mounts in the rear of your truck. You can carry them by the fork mounts, or you can actually have these adapted for through axle bikes as well.To switch these out from the skewer mount that you see here to the through axle mounts, you would remove the bike completely, loosen up this screw, remove the inside and replace that through axle adaptor through at that point and then retighten that screw.The adapters that come with it can fit 15 mm through axles. It can also accept 20 mm through axles with an adapter. Part number S64715, which is sold separately.This uses a telescoping end here and this is going to help it fit varying truck bed widths with this knob to tighten down on the side of it, to keep it held in place. It does come with a series of locks that are key to life to help secure this to your truck bed once it's installed as well.It also has these padded ends here, so once you place it onto the bed rails, it's not gonna scratch or scuff up your truck once it's installed.It also has this latch on the inside here.
Swagman Truck Bed Bike Racks Review - 2018 Ford F-250 Super Duty
Speaker 1: Today we have our 2018 Ford F250 Super Duty. We're gonna be test fitting the Swagman Tailwhip tailgate padded bike rack for full-size trucks, part number S64760. It's great for carrying anything from your bikes to your surfboards or stand-up paddle boards for transporting them from one place to another.Now, what sets this apart from other bike racks, you can just throw this over the edge of your tailgate here, and this is for people who maybe don't have the hitch bike racks or don't want to necessarily drill into the bed of their truck for the fork-mount bike racks as well.This can carry up to five bikes or a couple stand-up paddle boards or surfboards. This has several points to tie down your gear, and also comes with hook-and-loop straps to secure your bikes. With the surfboard, we did use a strap, which is sold separately, and you can find it on etrailer.com.The tailgate pad is nice and thick, so it's not only gonna protect your tailgate from any scratches or abrasions, it's also gonna protect your gear that you're hauling to make sure it doesn't get any scratches on it as well. And even with everything installed, you still have plenty of space in the truck bed to store other gear.We also have this convenient flap at the front here, which has these hook-and-loop straps to hold it in place, so we have easy access to our hatch here.
Thule Truck Bed Bike Racks Review - 2018 Ford F-250 Super Duty
Speaker 1: Today on our 2018 Ford F250 Super Duty, we're gonna be test-fitting the Thule bed rider two bike rack for truck beds, part number TH822XTR. The Thule bed rider two allows you to carry up to two bikes in the bed of your trick by gripping them by the fork mounts up front here. This is an ideal bike rack for those who don't have bike racks or don't necessarily wanna go through the tailgate pad situation on the back here and possibly block off the rear camera. This essentially clamps down to the inside of the bed of your truck, has two fork mounts for different styles of bikes. It can carry the road bikes like you see here or the mountain bikes. It also works with bikes with disk brakes as well.This does come with three of the Thule lock cores.
Thule Truck Bed Bike Racks Review - 2018 Ford F-250 Super Duty
Speaker 1: Today on our 2018 Ford F250 Super Duty we're gonna be test fitting the Thule instigator truck bed single bike rack, part number TH501. Thule instigator allows you to carry one bike in the bed of your truck, and it's gonna carry bikes regardless of their suspension style or style of the bike itself, whether it be mountain bike like you see here or road bike, or kid's bike even. It's a ratcheting style bike rack that clamps around the tire and slides into place and holds it in as you drive. The hook itself does have a padding around it to help protect your bike once it's being installed, and also it does have an open spot on the bottom here that you can utilize the Thule lock core, which is sold separately, so you can secure your bike to the bike rack while you travel. This has a quick trigger release here to make loading and unloading very easy.With one instigator installed here, as you can see there's plenty of space to add another, as well as another bike. This bike rack is ideal for someone who may not already own a bike rack and wants to use this for occasional purposes.
Softride Truck Bed Bike Racks Review - 2018 Ford F-250 Super Duty
Speaker 1: Today on our 2018 Ford F250 Super Duty we're going to be test fitting the SoftRide Shuttle Pad Tailgate Bike Carrier for full-sized pickup trucks, part number SR26457. The SoftRide Shuttle Pad is great for transporting your mountain bikes up to the top of the trail or your surfboards and stand up paddle boards out to the beach. It simply hangs around your existing tailgate.It has this nice padded section here to help protect your bikes as well as your vehicle from any scratches or abrasions. And also, this is going to be perfect for people who don't have, say, the hitch bike racks for your truck, or don't necessarily want to do any drilling or modifications to the bed of your truck to carry your bikes from place to place as well. The Shuttle Pad also comes with these hook and loop straps at various points here to help hold your bikes in place. This can carry up to six bikes on this pad.
Inno Truck Bed Bike Racks Review - 2018 Ford F-250 Super Duty
Speaker 1: Today on our 2018 Ford F250 Super Duty, we're going to be test-fitting the Inno-Velo Gripper Bike Rack for truck beds, part number INRT201. The Inno-Velo Gripper enables you to carry up to one bike in the bed of your truck. You can place it on either the passenger side or the driver's side, depending on which one you want, or you can buy an additional set and have up to two bikes in the bed of your truck.With it installed right now, you can see we still have plenty of space in the bed for other accessories. It does come with these pads for your bed rails, to make sure they don't get any damage on them once the clamps are tightened down, and it also has these D links here, which can be used with the cable lock to help secure your bike to your truck bed. These do have ratcheting straps that hold your bike into place, and also have adjustable arms here, back and forth, to accommodate different sized bikes. The Velo Gripper is perfect and economical choice for people who don't have say bike racks or necessarily want to drill into the bed of their trucks for those fork mount bike racks that you can get as well.Now that we've gone over some of the features of the bike rack, let's go ahead and show you how it installs.
Curt Hitch Bike Racks Review - 2017 Ford F-250 Super Duty
Today on our 2017 Ford F-250 Super Duty, we're going to be test fitting the Curt 4 Bike Rack, part number C18086. We already have a bike installed on the rack. Let's take a closer look and show off some of the features. First off, one of the better features about this is the fact that this can tilt away from the vehicle with the bikes still attached, to gain either hatch access or in this case, tailgate access. To do that, you'll see at the front here we have two pins; a larger and a smaller. Loosen those up. You may have to maneuver the bike rack a little bit to get these out, then lower it down.
Hollywood Racks Trail-Rider Hitch Bike Racks Review - 2017 Ford F-250 Super Duty
Today on our 2017 Ford F250 Super Duty we're going to be test fitting the Hollywood Racks Trail Rider 2-bike rack, part number HR200. We already have a bike installed on the rack. Let's take a closer look and show off some of the features. The bike rack does have a nice raised shank to it, so for hitches that sit particularly low to the ground, you're not going to have an issue of clearance between your bike rack and the ground. It does grip your bike at three points. We're going to have two hook and loop straps on either tire.
Thule Truck Bed Bike Racks Review - 2017 Ford F-250 Super Duty
Today, on our 2017 Ford F-250 Super Duty, we're going to be test-fitting the Thule GateMate tailgate pad and bike rack for full-size trucks, part number TH824. This measures about 62 inches wide. We already have a bike installed, as you can see here, but it also has other uses, such as if you want to put your surfboards or stand-up paddle boards, you could set them on here as well. It does have these areas here, which you can use for tie-down points to secure your bikes to it, and the pad does provide protection between your bike and your tailgate to make sure that your vehicle itself doesn't get scratched up. Let's go ahead and take the bike off. It simply lifts out. It can carry up to two bikes total, and this is excellent for trucks that have the built-in toolbox up at the front so you can't put the truck-bed bike racks that we also carry at etrailer.com. How it connects We have these three straps that go underneath the tailgate and connect here. You just cinch them down.
Yakima HoldUp Hitch Bike Racks Review - 2017 Ford F-250 Super Duty
Today on our 2017 Ford F250 Super duty we're going to be test fitting the Yakima Hold Up two bike rack for two inch hitches, part number Y02443. We already have a bike installed on the rack, let's take a closer look and show off some of the features. One of the more interesting features about this bike rack is the fact that it can tilt away from the vehicle with both bikes still attached. To do that holding on to the bike rack, we'll come to the front with this red knob. You lift out and let it come towards you. Unfortunately with how close it is to the vehicle, you're not going to be able to open up your tail gate all the way because it will make contact with the bike. We'll just lift it back up into position until you hear that click.
Kuat Hitch Bike Racks Review - 2017 Ford F-250 Super Duty
Today on our 2017 Ford F250 Super Duty we're going to be test fitting the Kuat Transfer 2-bike platform rack for 1-1/4" and 2" hitches, part number TS02G. We already have a bike installed on the rack. Let's take a closer look and show off some of the features. Now one of the main features about this is the fact that it can tilt away from the vehicle with both bikes still attached. To do that you'll see this lever at the front here. Holding onto the bike rack, we'll push down on that and let the bike come forward. Unfortunately, though, we don't have full access to our rear tailgate here because it will make contact with the bike.
Softride Element-Parallelogram Hitch Bike Racks Review - 2017 Ford F-250 Super Duty
Today on our 2017 Ford F250 Super Duty, we're going to be test fitting the Softride Element Parallelogram Tilting 4 Bike Rack for 1 1/4" and 2" hitches, part number SR26248. We already have a bike installed on the rack. Let's take a closer look at the features. How the bike is actually attached to the rack, we'll have two points of contact with these two straps up at the top. We will also have this wheel strap that comes for all four bikes. Also, one of the more interesting features of this rack is the fact that it can tilt away from the vehicle with all four bikes still attached, which is very unique for a hanging style bike rack. We'll come to this lever here on the passenger side and pull out on it like so and let it come towards you.
Swagman XTC4 Hitch Bike Racks Review - 2017 Ford F-250 Super Duty
Today on our 2017 Ford F-250 Super Duty, we're going to be test fitting the Swagman XTC4 Four-Bike Rack, part number S64665. We already have the bike installed on the rack. Let's take a closer look and show off some of the features. How the bike is held into place, we're going to have three points of contact. We're going to have two straps at each tire and a wheel cradle at each tire, which can be adjusted by loosening and tightening these knobs here to accommodate different sized bikes and to assist with loading. We also have a padded frame hook up at the top, and it's padded to make sure that your bike frame itself doesn't get scratched up once it's being installed. Let's go ahead and take our bike off and set it aside.
Pro Series Hitch Bike Racks Review - 2017 Ford F-250 Super Duty
Today on our 2017 Ford F-250 Superduty, we're going to be test fitting the Pro Series Q-slot four bike rack, platform style, part number PS63138. We already have a bike installed on the rack. Let's take a closer look and show off some of the features. First off, how the bike is actually held into place, we're going to have three points of contact. We're going to have this padded frame hook up at the top, which is padded to insure that your frame doesn't get scratched up once it's being installed. Then we have these hook and loop straps on each tire being held into place by adjustable wheel cradles. By loosening and tightening these nobs, you can move these up and down to accommodate loading and to accommodate bikes of different sizes. Right now we have it in a four bike configuration.
Thule Hitch Bike Racks Review - 2017 Ford F-250 Super Duty
Today in our 2017 Ford F-250 Super Duty, we're going to be test fitting the Thule Vertex Swing 4 Bike Rack, part number TH9031XT. We already have a bike installed on the rack, let's take a closer look and show off some of the features. Now the most important feature about this rack is the fact that it can swing away from the vehicle to give you full access to your tailgate or your hatch, without having to remove the bikes, which is pretty unique for a hanging style bike rack. To do that, we'll come to the back first. We'll undo this knob here, unscrewing it all the way. Move this pin here as well, lift up on this pin, swing it out. So you have it almost about 90 degrees.
Thule Hitch Bike Racks Review - 2017 Ford F-250 Super Duty
Today on our 2017 Ford F250 Super Duty we're going to be test fitting the Thule T2 Classic 2-bike rack, part number TH9044. We already have a bike installed on the rack. Let's take a closer look and show off some of the features. The most interesting feature about this bike rack is the fact that this can tilt away with bikes still attached. To do that we'll come to this pin up at the front. We'll remove that.
Hollywood Racks Sport-Rider-2 Hitch Bike Racks Review - 2017 Ford F-250 Super Duty
Today, on our 2017 Ford F-250 Super Duty, we're going to be test fitting the Hollywood Racks Sport Rider Two-Bike Rack, part number HR1000. We already have a bike installed on the rack. Let's take a closer look and show off some of the features. How the bike is attached to the rack, we're going to have three points of contact. We're going to have two hook-and-loop straps on either tire, and we're going to have this padded frame hook up at the top to ensure that your bike's frame doesn't get scratched up when it's being installed. One of the biggest features about this bike rack is the fact that you can tilt it away from the vehicle with both bikes still attached to get access to your rear tailgate. To do that, we'll have two pins and clips here at the base. We'll remove those and we'll let it come down.
Swagman Hitch Bike Racks Review - 2017 Ford F-250 Super Duty
Today on 2017 Ford F250 Super Duty we're going to be test fitting the Swagman XT 2 Bike Rack, part number S64650. We already have a bike installed on the rack, let's take a closer look and show off some of the features. How the bike is held into place, we're going to have one point of contact, and that's going to be this padded frame hook up at the top. Now it's padded so that the frame of your bike doesn't get scratched up once it's being installed. We also have these adjustable wheel cradles at the base which can move back and forth by loosening and tightening the knobs at the top, and this is to accommodate bikes of different sizes. We also have a nice raised shank to the bike rack itself, so even if your hitch sits particularly low to the ground, you're not going to have any clearance issues between the bike rack and the ground. Let's go ahead and take the bike off and set it aside.
Thule Hitching-Post-Pro Hitch Bike Racks Review - 2017 Ford F-250 Super Duty
Today on our 2017 Ford F250 Super Duty we're going to be test fitting the Thule Hitching Post Pro Folding Titling 4 Bike Rack, part number TH934XTR. We already have a bike installed on the rack, let's take a closer look and show off some of the features. How this bike is attached to the rack, we're going to have three points of contact. We're going to have two straps up at the top, and one off to the side, and that's going to serve as an anti-sway cradle to keep your bike from moving too far back and forth and making bike to bike contact. The cradles themselves are adjustable along the arms to accommodate loading and unloading. We also have these grooves on the cradles as well. So once your bike sets down, the frame won't be pushing against the cables.
Thule Hitch Bike Racks Review - 2017 Ford F-250 Super Duty
Today on our 2017 Ford F250 Super Duty, we're going to be test fitting the Thule Vertex 4 bike rack part number TH9029XT. We already have a bike installed on the rack, lets take a closer look and show off some of the features. How this bike rack grips your bike, it's going to have three points of contact with two straps up at the top and one strap off to the side, which is going to serve as an anti-sway cradle to keep your bike from moving too far back and forth and making bike to bike contact with the bikes in front of it. We also have an integrated cable lock up at the top of the mast. You pull that out, wrap it around your bikes, bring it up at the front and then lock it into place to secure your bikes to the bike rack. The cradles are movable to accommodate loading. They also have these groves in them so when your bike rests on here the cables can actually go into these screws, not be pressed up against the frame while it's being installed or crushed when it's being tightened down.
What our customers are saying:
"Everyone that bought before me was right! I got my rack in time for my next days off and putting it together was fast too. And I'm a grandma!! Thank you for being fast and honest! You beat anyone in my town hands down!"