Best Ford F-150 Ball Mounts

change vehicle


Ball Mounts Videos

Hidden Hitch Ball Mount with 6 Inch Drop Review - 2015 Ford F-150

Today, on our 2015 Ford F-150 SuperCab, we'll be doing a test with a Hidden Hitch ball mount with a 4 and 3 quarter rise, or a 6-inch drop rated at 6,000 pounds. That's part number 80240. Now I've already got it installed in the drop position on the back of our F-150 just to give you a good idea what it's going to look like. First thing we need to do to determine if this wall mount is right for us is we need to take a hitch height measurement. Let's go ahead and uninstall it. Now, we're going to measure from the ground to the top of the inside of the receiver. Now keep in mind, this could vary depending on tire size, accessories, or even after market hitches.



Fastway Ball Mounts Review - 2015 Ford F-150

Today on this 2015 Ford F150, we're going to be test fitting the fastway, self-locking, adjustable aluminium ball mount, part number TDALBM6600. You have a choice between two separate ball mounts, which you can switch. It also has a 6 inch drop as well as a 7 inch rise. Before we start, going to go ahead and give you a quick measurement from the top of the hitch here, down to the ground, to give you how much idea of what ground clearance you're going to be working with. That's going to be about 19 and three quarter inches. Now, as you can see, we already have the ball mount installed. How it works ...



Andersen Rapid-Hitch Ball Mounts Review - 2015 Ford F-150

Today, on this 2015 Ford F-150, we're going to be test fitting the rapid hitch adjustable aluminum ball mount, part number AM3410. This does have 2 chrome balls with a 5.5" drop. Now, before we do anything here, I'm going to go ahead and give you a quick measurement of the distance between the top of the hitch, here, to the ground, just to give an idea of what that will be for this vehicle. That's going to be right at 19.75". Now, right now we have the ball mount, itself, in the drop position. From this point, you go up to inaudible 00:00:37 the side, here, pull the pin and the clip, here.



Fastway Ball Mounts Review - 2014 Ford F-150

Today on our 2014 Ford F150, we're doing a test fit of the self-locking adjustable aluminum bar mount, part number DTALBM6600. I have it on the vehicle already. Before putting this in, they want you to make a measurement from the top of your hitch inside to the bottom. I already made that measurement and it's 19 1/2". The first thing that I'd like to show you is the self-locking pin itself. We're going to turn the key.



Draw-Tite Ball Mount Review - 2013 Ford F-150

Today on our 2013 Ford F150 well be test fitting the Draw Tite ball mount for two inch hitches, part number 2923. Before we begin our test fit, we will first need to obtain a hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. Our measurement is 19 inches. This measurement may vary due to tire size and aftermarket accessories. Now well go ahead and slide the shank of the ball mount into the opening of the hitch in the drop position, align up our pin holes and secure it with the pin and clip.



Curt Tri-Ball Mount Review - 2013 Ford F-150

Today on our 2013 Ford F150 well be test fitting the Curt Tri ball mount for two inch hitches, part number C45001. Now before we begin our test fit well first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. Hitch height may vary due to tire size and aftermarket accessories. Our measurement is 19 inches. Well then slide the shank of the ball mount into the opening of the hitch, align up our pin holes and secure it with the pin and clip.





Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Ford F-150

Today on our 2013 Ford F150 well be test fitting the Convert-a-ball cushion ball mount for two inch hitches, part number AMSC2HD. Now before we begin our test fit well first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. Ours measures 19 inches. This measurement may vary due to tire size and aftermarket accessories. Now well go ahead and slide the shank of the ball mount into the opening of the hitch in the drop position and secure it with a pin and clip.



B and W Ball Mounts Review - 2012 Ford F-150

Today on this 2012 Ford F-150 we're going to be test-fitting the B & W Tow & Stow, 3-ball ball mount for 2" hitches with a 7" drop and a 7-1/2" rise, rated for 10,000 pounds, part number BWTS10049B. We already have this installed on our vehicle, and the first thing I'd like to point out is this pin and clip that we have attached to the 2" hitch with, does not come with the ball mount. You can find it on our website though, it's part number PC3. Obviously, one of the advantages to this product is the fact that we can use three different ball mounts to accommodate different loads and different trailers that you may have. To do this, you can switch it out by pulling the pin and clip here. Right now we have it in the 2" ball position. Pull the pin and clip, you simply rotate it, and at this point we'll be at the 1-7/8" ball.



Diversi-Tech Adjustable Ball Mount Review - 2012 Ford F-150

Today on our 2012 Ford F-150, we'll be test fitting the Diversi-Tech Self-Locking Adjustable Aluminum Ball Mount for 2-inch hitches with a 6-inch drop or 6-inch rise rated at 10,000 pounds, part number DTALBM6600. Now before we begin our test fit, we'll first need to obtain a hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of 19-1/2 inches. This measurement may vary due to tire size, hitch style, or aftermarket accessories. To begin our test fit in the drop position, we'll slide the shank of the ball mount into the opening of the hitch.



Curt Multi-Ball Adjustable Ball Mount Review - 2012 Ford F-150

Today on our 2012 Ford F150 we'll be test fitting a Curt Multi-Ball Adjustable Ball Mount for 2" hitches, part number D900. Now before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. Our measurement is 19-1/2". This measurement may vary due to tire size, hitch style, or after-market accessories. Now to begin our test fit, in the rise position, we'll slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure it with the clip on the other side.



Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2012 Ford F-150

Today we have a 2012 Ford F150 and were going to be test fitting the Convertible Cushion Six Way Ball Mount, part number CAB-6W. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, well measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. First well show you how to mount the ball mount to the truck. Well insert the ball mount with the receiver tube of our hitch lined with the hitch pin holes and insert our pin and clip.



Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2012 Ford F-150

Today we have a 2012 Ford F150 and were going to be test fitting the convertible cushion ball mount, part number AMSC8. But before we can test fit our ball mount first we want to measure the hitch height of our truck. To measure the hitch height, well measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. To measure our new ball mount, first well mount it in the drop position. First well insert the ball mount into the receiver tube of the hitch.



Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2012 Ford F-150

Today on our 2012 Ford F-150, we're going to be test fitting the Convert-A-Ball Cushion Ball Mount, part number AMSC4. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, we'll measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. First, we're going to measure our ball mount in the drop position. We'll insert the ball mount into the receiver tube of the hitch, line up the hitch pin holes and secure it with a pin and clip.



Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2012 Ford F-150

Today, we have a 2012 Ford F-150 and we're going to be test fitting the Convert-A-Ball Ball Mount, part number AMSC2HD. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, we'll measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. To test fit our ball mount or drawbar, we're going to insert the end of the receiver tube of our hitch. We'll line up the hitch pin holes and secure the drawbar with the pin.



Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2012 Ford F-150

Today, we've got a 2012 Ford F-150 Four-door. We're going to be test fitting the Convert-A-Ball Cushion Ball Mount, part number AMSC2. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, we'll measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. To test fit our ball mount, first we're going to use it in the drop position.



Andersen Rapid Hitch Ball Mount Review - 2012 Ford F-150

Today on our 2012 Ford F150, were going to be test fitting the Anderson Adjustable Rapid Hitch, part number AM3410. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height well measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. To test fit our ball mount kit well inert it into the receiver tube of our hitch, line up the hitch pin holes and secure it with the pin and clip. We have the ball set at the highest configuration.



Draw-Tite Ball Mount Review - 2012 Ford F-150

Today on our 2012 Ford F-150, were going to be test fitting the Draw-Tite Ball Mount, part number 2923. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, well measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. Now, well test fit the drawbar. First, well place it in the drop position.



Curt Tri-Ball Mount Review - 2012 Ford F-150

Today on our 2012 Ford F-150 Four Door we're going to show you the Curt Tri-Ball Mount, part number C45001. This is the ball mount with three different ball sizes fixed to it. A 1-7/8 inch, a 2-inch and a 2-5/16 inch ball. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height we'll measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches.



Convert-A-Ball Ball Mount with 10 Inch Drop Review - 2012 Ford F-150

Today on our 2012 Ford F150, we're going to be test-fitting the Convert A Ball Cushion Ball Mount, part number AMSC10; but before we can test-fit our ball mount, first we want to measure the hitch hike of our truck. To measure the hitch hike, we'll measure from the ground to the inside top edge of our receiver tube. Our hitch hike measures 18-1/2 inches. To test our ball mount, first we're going to mount it in the drop position. We'll insert the shank of the ball-mount into the receiver tube of the hitch. We'll add the hitch pin holes and secure the ball mount with a pin and clip.



Curt Tri-Ball Mount Review - 2010 Ford F-150

Today on our 2010 Ford F-150, we'll be test fitting the Curt Tri Ball mount hollow two inch shank in black, part number C45001. To begin our test fit, we'll first need to get our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height measurement of 17 and half inches. Please keep in mind that this measurement may vary due to the hitch style, tire size, or after market accessories. Now we can go ahead and install our ball mount. We'll slide the shank of the ball mount into the receiver tube of the hitch. Line up the pin hole and install our pin and clip.



Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2010 Ford F-150

Today on our 2010 Ford F150 we'll be test fitting the Convert-a-Ball cushion ball mount for 2-inch hitches with a 3/4-inch riser or 2-inch drop rated at 10,000 pound capacity, part number AMSE2. To begin our test fit we'll first need to get our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height measurement of 17-1/2 inches. Please keep in mind that this measurement may vary due to the hitch style, tire size or after market accessories. Now we'll take our ball mount and install it in the drop position first, secure it by installing our pin and clip. We have a measurement from the ground to the top of our ball platform of 15-1/4 inches. Make sure that when you measure your trailer height you do so when your trailer is level. You want to measure from the ground to the bottom of your coupler, and if your measurement matches our's then this would be a good fit for you. We'll flip our ball mount over to the rise position, install independent clip, and we now have a measurement from the ground to the top of the ball platform of 17-3/4 inches. Once again if this measurement measures your trailer height measurement, then this would be a good fit for you. That completes today's test fit of the Convert-a-Ball cushion ball mount for 2-inch hitches with a 3/4-inch riser or 2-inch drop rated at 10,000 pounds, part number AMSE2 on our 2010 Ford F150.



Andersen Rapid Hitch Ball Mount Review - 2010 Ford F-150

Today on our 2010 Ford F150 well be test fitting the Rapid Hitch adjustable aluminum ball mount kit with two chrome balls with a five and a half inch drop and a six and a half inch rise part #: AN3410. To begin our test fit well first need to get our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height measurement of 17 and a half inches. Please keep in mind that this measurement may vary due to the hitch style, tire size or after-market accessories. Now well take our ball mount and install it in the drop position first.



Draw-Tite Ball Mount Review - 2010 Ford F-150

Today on our 2010 Ford F150 we'll be test fitting the Draw-Tite ball mount with a 3/4-inch rise or a 2-inch drop rated at 7,500 pounds, part number 2923. To begin our test fit we'll first need to get our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height measurement of 17-1/2 inches. Please keep in mind that this measurement may vary due to the hitch style, tire size or after market accessories. We'll go ahead and grab our ball mount and slide the shank of the ball mount in the drop position into the opening of the hitch securing it with the pin and clip. Now we'll measure from the ground to the top of the ball platform and get a measurement of about 15 inches. Make sure when measuring your trailer height you do so when your trailer is level. You want to measure from the ground to the bottom of your coupler. If your measurement matches our's, then this would be a good fit for you. We'll now flip the ball mount over into the rise position. We'll measure from the ground to the top of the ball platform and get a measurement of 18 inches. Once again, if your measurement matches our's, then this would be a good fit for you. That completes today's test fit for the Draw-Tite ball mount with a 3/4-inch riser or 2-inch drop rated at 7,500 pounds, part number 2923 on our 2010 Ford F150. .



Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2010 Ford F-150

Today on our 2010 Ford F150, well be test fitting the Convertible All-Cushion Ball Mount for 2 inch hitches for a 6 inch rise or 8 inch drop with a 10,000 pound capacity: part number AMSC8. To begin our test fit, well first need to get our hitch height. This is the measurement from the ground to the inside, top edge of our receiver tube. We have a hitch height measurement of 17 inches. Please keep in mind that this measurement may vary due to the hitch style, tire size, or after-market accessories. Well grab our ball mount and install it in the drop position first. Well slide the shank of the ball mount into the receiver tube of the hitch. Line up the pinhole and install our pin and clip.





Ford F-150 Ball Mounts Questions