# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
# 2
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
I have two of these. My first I bought two years ago. I very highly recommend this Curt Class III Ballmount 2" Drop because of its price, durability and quality. I towed various class 3 loads with ease and confidence with this ballmount. It slides into the hitch and does its job without fail. It looks excellent after towing a load. etrailer's price is about as good as it gets and delivery is very speedy.
Easy install, took around 30 minutes by my self to install. Hardest part of install was torquing the bolts ! Installed 13322 Class III Hitch - Gm 1500/2500 Pickup and Curt Class III Ballmount -2ball-2 Drop
# 3
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
I just purchased a new hideaway hitch system. But the hitch sits only 15 inches off the ground at best. And, my trailer coupling is 22-23 inches off ground. So l needed 7-8 inches of rise on the new 1.25 inch receiver system. Internet research took me to etrailer and the Brophy hitch. I got 5.5 inches with the Brophy hitch, the highest available for a 1.25 inch receiver I could find. The others are limited to 5 inches max. I added another 1.5 inches with your Curt shock absorbing hitch. Voila, with a combined 7 inches of rise and on level ground the trailer now rides perfectly level!!!! Both parts were very easy to connect. Delivery was speedy. Thank you for saving the day and my investment in an expensive new hideaway hitch!
Quality parts, but the extra rise with this and the Curt Rocker Ball still wasn’t enough to avoid scraping the top of my inclined road while towing my boat.
# 4
Draw-Tite Drawbar for 1-1/4" Hitches - 4-3/4" Drop - 7-1/2" Long - 3,500 lbs
Exactly what I needed. I bought this Mercury Mariner used and it had factory installed hitch with a 1 1/4 receiver. I needed a drawbar with a substantial drop to tow my utility trailer somewhat level. Local shops had lots of 2 inch drawbars with drops but no 1 1/4 and I was even told that they weren't made and I would have to use a 1 1/4-2 inch receiver adapter do get what I wanted. You folks had what I needed and it arrived quickly. I should have looked here first.
I have a 2012 Outback. The car has more ground clearance than my previous Outback so the 2 1/2" drop on my old drawbar resulted in the rails on my motorcycle trailer tilting backwards slightly. This made loading the motorcycle a bit tricky because it wanted to roll backwards when loaded, until strapped down. I looked all over town for a drawbar with more drop but was unable to find one. Finally found this drawbar and it worked perfectly with enough drop to level the rails on the trailer. I also like the fact that it is a bit shorter than other drawbars and doesn't stick out as far.
# 5
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.
I am very pleased with the hitch, ball mount, and electrical package. All were easy to install if you follow the easy to understand directions. An added plus for putting one of these on a MINI is that the hitch can be hidden behind the "black plate/cover" that is on the rear bumper. It looks just like it came out of the factory except when to need to install the ball mount. The service has been outstanding. This is the place to go.
# 6
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
I installed this on my 2015 Honda Accord for the purpose of pulling my small aluminum fishing boat and trailer. Works great!
Drawbar looks great and will be using in next two days. Thanks!
# 7
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 8
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
Very versatile - can use it on both my vehicles that have very different hitch height. Clean welds, super solid. Weighs a LOT!
# 9
Curt Drawbar for 1-1/4" Hitches - 5-3/8" Rise, 6" Drop - 5-9/16" Long - 2K
I used this on a 2014 Ford Fusion with a Reese receiver hitch made for my vehicle. Either the neck of the drop hitch is not long enough to get the ball a few inches away from the vehicle or the Reese receiver hitch sits too far under the vehicle.
Website was easy to use and order. Tracking the package was simple to follow and package arrived on schedule. Part works great
# 10
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
My order was missing installation parts, but the etrailer team were quick to correct the issue. Even without a lift, I was able to install the receiver and brake light cable quickly, thanks to their extensive video libray.
I cannot emphasize enough how kind and thorough etrailer's customer experience team is. I originally (incorrectly) place an order for trailer parts that did not fit together, and etrailer took the time to review my order, identify the issue, call and email me to let me know, and place the correct order while over the phone. I am not an expert on any of these items so it is so unbelievably appreciated that they cared enough to check to see if I meant to order what I did. The delivery then arrive a day earlier than expected. What more could you possibly want from a customer service team? Thank you so much, etrailer!
# 11
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 12
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 6-1/4" Long - 3,500 lbs
All equipment was delivered on time. Hitch, wiring harness, receiver and ball. Watched video's on installation of harness and hitch. Went down to my garage and installed both with the help of my girlfriend. Very satisfied with the products and the installation. etrailer supplied the goods and the knowledge. I am very happy that I went this route.
Received hitch receiver and accessories in perfect condition. Installation was very easy. (Especially if you have a lift). I fit this on my 2014 camry SE. Everything fit perfectly. The installation video helped a great deal with measurements. Shipping was fast. I searched around for the best price and etrailer.com had the lowest overall price. Big thanks.
# 13
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
# 14
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Works perfectly. Fast shipping. Very Satisfied.
Very pleased with etrailer. Very easy to order from website. Fast delivery, easy to install ,perfect fit . Thanks. .
# 15
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
I bought this on my knowledgeable brother's advice - he gave me the exact order number and link to buy from etrailer! I had it installed locally, without complications. I use my truck mostly to haul my horse or my friend's two donkeys in my 14-foot stock trailer. I have no complaints, the hitch does what it's supposed to do.
Easy install, everything included, and great instructional video. Worked out great for my RAV4.
# 16
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Needed a large drop hitch to pull my car trailer. This item came quickly and worked perfectly.
This extreme rise ball mount is what I need to make my passenger car into a back-up trailer puller. It is well built and has a welded strut to reinforce the long rise/drop ball mount. The "shock damper" feature is sure to help absorb the leverage movement that a rise/drop ball mount passes on to the hitch receiver itself.
# 17
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
The Extra Long Ball Mount proved useful immediately upon receipt. Delivery was prompt, and the updates from etrailer.com helped plan transport of several bicycles, simultaneously with a camper trailer. The extended length facilitated use with a Swagman bicycle rack, also purchased via etrailer.com. The product arrived in excellent condition, with correct capacity rating, and works perfectly, and in conjunction with the bicycle rack. I recommend purchases from etrailer.
Product is exactly as described on the etrailer.com website and measurements and dimensions fit perfect. Easy phone order process and prompt delivery, standard shipping arrived 3 business days after the order was placed. The extra long version of the ball mount makes it perfect for me to put on the bike rack while towing my horses.
# 18
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black
I purchased the B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black and am extremely happy with it. It was $100 cheaper than anywhere else I shopped. Was delivered quickly and was an easy install. I used it to haul a trailer full of wood that I cut up and it got the job done! It is very heavy duty and takes the place of multiple single hitches. It’s nice to have all the options in one.
I like that it stows under the truck and i'm not banging my leg and getting grease on myself. The only draw back was i wanted to use my anti slap bracket and it would not fit due to the insert butts up to the hitch receiver. I'm not experiencing any slapping when taking off or stopping at this time.I use this for my boat and a utility trailer and i don't have to change hitch insert which is really nice, one less thing to do.
# 19
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 20
Curt Class III Ball Mount with 2-5/16" Ball - 2" Rise or 4" Drop - 7,500 lbs
This was purchased for towing a 7k GTWR utility/landscape trailer with my 2018 Chevy Silverado 1500 WT 4x4. I measured for necessary drop before ordering, and the 4" drop is darn near perfect. It's a great help that the 2-5/16" ball comes complete, installed and torqued properly at the factory. Appears to be quality construction, fits and functions perfectly. I have no complaints or issues.
The Curt Class III ball mount arrived as promised and the product is as advertised. My whole experience with the process was top notch from ordering to delivery, installation, and use all 5 star.
Curt Tri-Ball Mount Review - 2014 Ford Explorer
Today on our 2014 Ford Explorer we'll be test-fitting the Curt Tri-Ball Mount for 2 inch hitches, Part Number C45001. This tri-ball mount is a great alternative to purchasing different sized ball mounts for your different styles of trailers. We'll start off our test-fit by sliding the shank of the ball mount into the opening of the hitch. We'll then secure it with a pin and clip. Now since this ball mount has no drop or rise, if your vehicle's hitch height matches your trailer ride height, this ball mount would be appropriate for you. With the ball mount in this position, the 2 and 5/16ths inch ball is at the top.
MaxxTow Ball Mount Review - 2014 Ford Explorer
Today on our 2014 Ford Explorer, we'll be test fitting the MaxxTow Ball Mount with a 2" Accessory Receiver for 2" Hitches, with a 2-1/4" drop, rated at 5,000 lbs., part number MT70066. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of about 20-1/2". Keep in mind, this measurement may vary, due to tire size, hitch style, or other after-market accessories. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. We'll then secure it with the pin and clip. Now, this ball mount is a great way to haul a bike rack or a cargo carrier while towing a small boat or trailer.
MaxxTow Adjustable-Height Ball Mount Review - 2014 Ford Explorer
Today on our 2014 Ford Explorer we'll be test fitting the Maxxtow Adjustable Height Ball Mount for Two Inch Hitches with a 10 inch drop or an 8 inch rise rated at 5000 pounds, Part Number MT70067. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of about 20 1/2 inches. Keep in mind this measurement may vary due to tire size, hitch style or other after-market accessories. We'll begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. We'll then line up the pinholes and secure it with the pin and clip.
Draw-Tite Ball Mount Review - 2014 Ford Explorer
Today on our 2014 Ford Explorer, we'll be test fitting the Draw Tite Ball Mount with a 3/4 inch rise or 2 inch drop rated at 7,500 pounds, part number 2923. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. we'll get a measurement of about 20 1/2 inches. Keep in mind this measurement may vary due to tar size, hitch style or other after market accessories. We'll nor begin our test fit by sliding the shank of the ball mount into the opening of the hitch. Once secured with the pin and clip, we'll go ahead and measure from the ground to the top of the ball platform, getting a measurement of about 18 1/4 of an inch. Now if your vehicle's hitch height matches ours and your trailer's right height matches this measurement, this should be an appropriate ball mount for you. We can now flip the ball mount over into the rise position and again measure from the ground to the top of the ball platform and this position, this measurement if about 21 1/2 inches. Again, if your trailer's right height matches this measurement, this should be an appropriate ball mount for you. And that would complete today's test fit for the Draw Tite Ball Mount, part number 2923 on our 2014 Ford Explorer. .
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2014 Ford Explorer
Today on our 2014 Ford Explorer we'll be test fitting the Convert-A-Ball Cushioned Ball Mount for 2 inch hitches with a 3/4 inch rise or 2 inch drop rated at 10,000 pounds, part number AMSC2. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of about 20 1/2 inches. Keep in mind this measurement may vary due to tire size, hitch style, or other aftermarket accessories. In the drop position we'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. We'll then secure it with the pin and clip.
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2014 Ford Explorer
Today on our 2014 Ford Explorer we'll be test fitting the Convert-A-Ball Cushioned Ball Mount for 2 inch hitches with a 1 inch rise or 2 inch drop rated at 14,000 pounds, part number AMSC2HD. Before we begin our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of about 20 1/2 inches. Keep in mind this measurement may vary due to tire size, hitch style, or other aftermarket accessories. We'll begin our test fit by sliding the shank of the ball mount in the drop position and securing it with the pin and clip. We'll now go ahead and measure from the ground to the top of the ball platform getting a measurement of about 19 inches.
MaxxTow Tow Strap Loop Review - 2013 Ford Explorer
Today on our 2013 Ford Explorer, we'll be test fitting the MaxxTow Tow Strap Loop for two inch hitches, rated at 10,000 pounds, part number MT70029. We'll begin our test fit by sliding the shank of the tow strap loop into the opening of the hitch and securing it with a pin and clip; keep in mind the pin and clip are sold separately. This hitch mounted heavy duty shackle provides an attachment point for strap, cable, or rope to be used in agricultural, industrial, or recreational applications. With that, that'll complete today's test fit for the MaxxTow Tow Strap Loop for two inch hitches, part number MT70029 on our 2013 Ford Explorer. .
MaxxTow Ball Mount Review - 2013 Ford Explorer
Today on our 2013 Ford Explorer, we'll be test fitting the Maxxtow Ball Mount with the 2" accessory receiver for 2" hitches with a 2-1/4" drop. Rated at 5,000 pounds. Part number MT70066. Now, before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. The hitch heightis the measurement from the ground to the inside top of the receiver tube. The hitch height for our vehicle is about 16-1/4". Keep in mind that this measurement may vary due to tire size, hitch style or other aftermarket accessories. We'll now begin our test fitby sliding the shank of the ball mount into the opening of thehitch.We'll insert our pin and clip, and measure from the ground to the top of the ball platform.
Draw-Tite Ball Mount Review - 2013 Ford Explorer
Today, on our 2013 Ford Explorer, we'll be test fitting the Draw-Tite Ball Mount with three quarter inch rise or two inch drop rated at 7,500 pounds part number 2923. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height for our vehicle is about 16 1/4 inches. Keep in mind this measurement may vary due to tire size, hitch style, or other after-market accessories. We'll now begin our test fit by sliding the shank of the ball mount in the drop position into the opening of the hitch. We'll then secure it with a pin and clip and measure from the ground to the top of the ball platform.
Curt Tri-Ball Mount Review - 2013 Ford Explorer
Speaker: Today on our 2013 Ford Explorer we'll be test fitting the curt tri-ball mount for 2 inch hitches in black part no. C45001. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. We'll then secure it with a pin and clip. Now, since this ball mount has no drop or rise if your vehicle is hitch height matches your trailer ride height this ball mount would be appropriate for you. In this position we have the 2 and 5 16 inch ball on the top. We can pull the pin and rotate it to the right to access the 2 inch ball or to the left to access the 1 and 7, 8 inch ball. This ball mount is a great way to hold different size trailers without the need of additional ball mounts. That completes today test fit for the curt tri-ball mount part no
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Ford Explorer
Today on our 2013 Ford Explorer we'll be test fitting the Convert-A-Ball Cushion ball mount for 2 inch hitches with a 6 3/4 inch rise or 8 inch drop, rated at 10,000 pounds, part number AMSC8. Now before we begin our test fit we'll first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height for our vehicle is about 16 1/4 inches; keep in mind that this measurement may vary due to tire size, hitch style, or other aftermarket accessories. We'll begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. We'll then secure it with the pin and clip. With the ball mount secured well measure from the ground to the top of the ball platform getting a measurement of about 8 inches.
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Ford Explorer
Today on our 2013 Ford Explorer we'll be test fitting the Convert-A-Ball Cushion ball mount for 2 inch hitches with a 1 inch rise or 2 inch drop, rated at 14,000 pounds, part number AMSC2HD. Now before we begin our test fit we'll first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height for our vehicle is about 16 1/4 inches; keep in mind that this measurement may vary due to tire size, hitch style, or other aftermarket accessories.We'll now begin our test fit by sliding the shank of the ball mount into the opening of the hitch. We'll then secure it with the pin and clip. In the drop position, from the ground to the top of the ball platform is about 14 inches.
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Ford Explorer
Today on our 2013 Ford Explorer well be test fitting the Convert-A-Ball cushion ball mount for two inch hitches with a three-quarter inch rise or two inch drop, rated at 10,000 pounds, part number AMSC2. Before we begin our test fit well first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height for our vehicle is about 16 inches. Keep in mind this measurement may vary due to tire size, hitch style or other aftermarket accessories.Well begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. Well then secure it with the pin and clip.
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"