# 1
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
It was easy to install and works perfectly so far, I have only towed a 23,000 lbs gooseneck so far and am very pleased.
my install was completely custom as the back end of my 2005 ram 3500 is custom. I converted it into a weld in place hitch since the factory location was not being uses. axle was moved back 28" so the hitch had to be also.
# 2
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
My order showed up, box was mangled and ripped, all mounting hardware is missing. I'm supposed to have this installed at the end of the week and on top of spending 600+ dollars on the hitch now I have to go buy all hardware to mount it. Wish something could just come in one piece and all there, and not be all scratched up and missing parts. Unfortunately I wasn't home or I would have refused the delivery and sent it back for replacement
This is my 3rd B&W gooseneck now, 2 for 2nd gen Rams and 1 for a 3rd gen Ram. Every time they come banged up with the powdercoat peeling and gouged because they are literally thrown in a box. No bubble wrap or foam wrapped around the brackets. Just metal on metal banging around in a box. etrailer doesn't even package them within a box so the brackets end up going through the package with the edges being banged up. I get it, its a hitch but at the same time its only a matter of time before it rusts and then the powdercoat lifts in sheets and peels off. Every B&W gooseneck I've bought I have had to address it and refinish it. Sad that you pay for a premium product and they can't even package it with pride. Honestly what does it take to wrap the 5 pieces in foam and use bags or bubble wrap to take the empty space up so the components aren't banging around of each other.
# 3
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
B&W are great products……. Their product packaging is terrible the hitch comes in two boxes and one box was tore completely open and half of the hardware was missing now I’m sitting here waiting on Etrailer to fix my problem
Have been driving cross country since purchase. I'm am also using the companion 5th wheel slide with my application. With numerous slides and coupling and uncoupling. Both have performed flaulusly. Cudos to BW.
# 4
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Great product but the instructions are a little muddied. I replaced a welded in under bed gooseneck hitch with this unit. I chose this unit over a single pin gooseneck flip ball for the added mental security as well as potential for less rattle
I havnt towed with it yet, but this hitch seems to be very well built. Install was easy, I'm pretty handy and it took me about an hour and a half, would have been 45 minutes if I had a helper. Hardest part was my bed is bowed from use and the cross pieces were very snug between the bed and the frame.
# 5
Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch - 30K
When I placed my order I was given the option of taking a slightly used item for a nice discount. It arrived and looks BRAND NEW! I am happy once again for the quick service and great products from etrailer.
Excellent . I love this whole unit. As a single woman I really appreciate the case to hold the hitch and tie down rings. When I need to use the gooseneck in my truck it's quick and easy to install. When I need the full bed to haul hay and bags of grain, the hitch can be stored away under the back seat in my truck. Very bpkeased with the quality.
# 6
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
This was my first order I placed with et etrailer. If one work could say it I guess it would perfect! I ordered on a Tuesday arrived on Thursday. I Placed the order got conformation and a name and contact to call if I had any issues, once it arrived I got another email letting me know if had been delivered. The installation video was perfect made it’s easy to install just followed the steps. When I need any trailer related items I will use them. As far as the B&W hitch i put it in a 2017 Ram 2500 with Ram boxes. The fit and quality of the hitch and design is what I have come to expect from B&W. I got this hitch to pull a gooseneck horse trailer. If your wondering if it will work with Ram Boxes it will.
Great product from a great company. B&W sets the bar when it comes to all things towing/trailer related. And etrailer.com compliments them very well with customer service. I have utilized my turnover set up for about a year now with no issues. the convince of having a gooseneck ball when needed but still having complete use of my bed space critical for me as a contractor. I am constantly using the bed of my truck to haul tools and light material from site to site but also on occasion have to pick up bulk materials or move equipment with our gooseneck. The turnover ball from B&W was exactly what we needed to remain versatile.
# 7
Curt EZr Double Lock Underbed Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
Great hitch and easy to use. I did have to lift up the bed a little bit to install it. Took me about 5 hours because of that but otherwise it is a great hitch. The rings for the safety chains stay on the bed and the ball flips over and stows away completely.
Seems to be very well built. Shipping was very fast. Will definitely purchase other products.
# 8
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Easy installation. We had 3 guys and were done in 20 minutes less than instructions said. Works fine as frog's hair! When measuring the hole in the bed remember to measure from the front of the bed and rear! Then look underneath for the bed crossmember.
this installed correctly on my 2005 dodge ram 2500 diesel per instructions for installation with air bags. I have hauled a 42 foot 3 axle car trailer for over 6,000 miles with no issues. This was a great purchase. Thank you
# 9
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Awesome product. Would recommend to anyone!
Great service and shipping
# 10
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
This definitely is not a plug and play mechanism. There is interference with the lever to unlock the ball and it hitting one of the bolts. I had to shave the bolt down to make it even slide by, in addition to this I had to cut about 1/4” off the mechanism lever for it to open all the way and not hit the bracket on the truck. So in summary I had to make two cuts into the product to make it even function properly. Poor quality control.
I did receive the hitch but not when promised. Also I did not receive any installation instructions.
# 11
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
I bought this hitch for my 2014 Ram 1500. I love it. I've had a few gooseneck hitches in my life and this one is my favorite. I love the fact you can unlock the ball in the bed without jumping in and out. Just turn the key provided and turn the ball over. If I replace this truck down the road, I will be ordering this hitch again. Great hitch, strongly recommend.
This B&W Turnover Underbed Gooseneck Trailer Hitch setup fit my RAM 1500 perfectly. Removal of the ball is a breeze and it secures firmly in place when re-installed.
# 12
Curt Underbed Gooseneck Trailer Hitch for Ram 2500 - 30,000 lbs
Loved how eazy product installed instructions on hitch was great. Found on etrailer.com a video of how to install hitch. U will have to remove heat shild and exuast pipe to make much easier to in stall. The trailer ball is sweet u just flip up latch and turn then it's free to remove. Ordered hitch on Saturday free shipping and they called me to make sure it was shipping to right location. Then they emailed me when it shiped. It arrived on Tuesday on the same week. The price was great to. Will use hitch to pull 25 ft hay trailer and 24 foot stock trailer.
Very nice hitch, took me about 3 hrs to install on a 2014 RAM 2500 6.5 bed with help from the wife. The hitch is very thick steel, probably close to 1/2". The ball works great, very easy to secure and remove. Very happy with the hitch and glad I chose it over the turnover ball which seems to be slightly harder to install. Some tips... remove spare tire, remove heat shield, drill the 3 1/4" hole, make sure to use a good hole saw made for metal, positition the nuts using the brackets, have someone get the bolts started while you hold the hitch. Tighten the bolts, you will probably have to remove the exhaust hangers to move the exhaust enough to tighten the passenger side bolts, torque to spec, drill the safety hook holes, install safety hooks and put everything back together...thats pretty much it. I took my truck and had the bed Linex'd after I installed the hitch. They touched up around the holes. Looks awesome!
# 13
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
EASY FAST INSTALLATION
Not the greatest installation instructions
# 14
B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs
Came in a timely manner, about a week from the time I ordered it to it delivered to my door step in Alaska. The hitch itself is very high quality with nice clean welds and sharp clean edges which took almost no prep work to weld in to the frame I had built for it. You could tell by looking at this that B&W uses nice welding equipment and employs quality welders. Overall very happy with this. Installed on Monroe flatbed on F-450 cab and chassis truck.
This unit was very handy to be able to purchase and install on my Bradford Built flatbed so that I could install my B&W companion hitch with flatbed base on the truck. The welding was all fairly straight forward and didn't require much except for a few washers and a piece of flat steel for a spacer. The one down side is that the hitch pin/handle does not have any built in twist-n-lock method to lock it so the pin remains disengaged for the ball or companion assembly install like on the common B&W under truck bed assemblies I've had on several trucks. We ended up installing the pin slightly out of line so that the tip of the pin would catch on the exterior of the receiver when pulled out and then when I wanted to engage the pin just push up on the handle and press the pin back in. I do like that I can still cover the hitch hole with the cover plate as seen in the picture.
# 15
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
This is an excellent product from B&W! It fits my Ram truck exactly, is very well built, and was easy to install following the instructions specific to my vehicle. etrailer shipped this from stock very quickly and their customer service representative was extremely helpful. Thank You!
Great product.
# 16
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Great product w great instructions. It was an affordable package that installed decently. We have used the hitch for a year now and have had zero issues w it. The only reason for not giving it 5 stars was because the cross bars that go between the frame rails needed to have the threaded holes chased w a tap to remove the powder coating prior to installation. I initially tried installing it without chasing the threads and the bolts started to get very tight before the parts even pulled together. Once the threads were clean, everything assembled very well. The hitch takes time to install, at least if you want it to look good and be correct. On a 1500 ram, you will probably need to install some form of helper spring or air bags to prevent the rear from squatting from the weight of the gooseneck trailer…the factory 1500 coil springs are not firm enough on their own.
Ordered this after deciding to go with it over a B&W kit due to me not using it a whole lot and the price difference. When I received the package 1/2 the hardware was missing because the inner box it was in was all broke apart and the outer box was not sealed up. So I would have to give the packaging and shipping one star because I had to go spend an extra $75 on grade 8 hardware. The paper directions were not totally clear on several thing so we resorted to the video which helped a lot. The two large carriage bolts that go in the rear cross member are a little deceiving because the video makes it seem like they slip right in. However, the heads were larger than the pass through in the frame rails so it took quite a bit of extra time and ingenuity to get those fished through there with the plates.(The carriage bolts survived shipping so they were what came with the kit). In the video it showed where he cut a large u out of the inner fender to clear the pull handle and notched the bed that looked kind of sloppy. With a few extra measurements you can just cut a hole in both for handle to slide through and give it a much cleaner look. Definitely recommend putting a bolt through receiver holes and using a strap to hold up center plate through hole in bed after you get it into place. Makes life a lot easier until you get the bolt ls in. Overall this hitch works and functions great. Install went pretty smooth with two people and I would recommend it to anyone needing a hitch.
# 17
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Great product, handled my 18,000lb GVW 5th Wheel with-out issues. Fast delivery and great customer service too!
product came on time, well packaged, putting unit together was fairly easy only problem we had was getting the bolts out of the truck bed so we could lift it up to slide the rails in.
# 18
Curt Overbed, Folding Ball Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
its solid , no issues so far ...... the only little detail is the chain connectors they somehow by design tend be difficult to extend up and down but its an easy fix that got done on day one and no problem since
The hitch is extremely stout. The install was not so bad but the instructions lack a bunch of detail. When received, parts were missing. See pics. After a few trips to the hardware store I managed to put the parts together to install the hitch. The fact that I was on a stringent timeline made this task more difficult. The template for centering the frame hitch was non-existant so allot of time was spent with a tape measure and a marker. All in all its a solid unit. I would suggest a buy on this one but etrailer needs to work the transportation issues of their boxes. The Curt over bed portion was all there and in a solid box.
# 19
Hide-A-Goose Underbed Gooseneck Trailer Hitch - 30,000 lbs
It was super easy to install. I have had no problems at all. I would definitely buy it again.
under bed gooseneck mount 2017 RAM 3500 reg cab diesel 2WD I installed it myself sitting on the ground with the spare tire out. a bit challenging for one small guy . But got-er done. Only residual problem, it ever so slighty touches the exhaust pipe when starting the engine. Hauled my 26' 10000 lb trailer to Michigan and back. Like it much better than the "universal" mount in my 96 Ram 2500 CTD.
# 20
Curt Quick Goose 2 Gooseneck Hitch with Installation Kit for Dodge Ram - 30,000 lbs
Get a turnover ball and don’t be the sucker I ended up. I laugh every time I think of the convenience I thought I was getting by not having to climb in the back of the truck. I don’t know if mine is defective or if this device is actually a workout program mixed with an anger management exercise in disguise. I’ve been using it for a year now, but within a month I developed a strategy for getting my trailer hooked up. First I climb into the back of the truck to cut the duct tape off I’ve used to attach the worthless rubber cap which falls off every chance it gets, filling the mechanism with whatever you have in your truck. If you ever plan to do anything with the bed of the truck besides pulling your gooseneck, haul hay, a four wheeler, anything dirty it will definitely jam your ball. After the tape is off I fight the first lever, I yank, turn, pull, twist, bang, swivel, dance this lever into the exact position. I climb under the truck and cover myself with wheel grease and scum getting the thing to unlock. Then the second lever, to lift and drop the ball. Repeat the steps of the first lever with less twisting, but add climbing into the bed with a hammer, banging the ball, climbing underneath, banging the lift arm, banging underneath, shaking, bouncing and sweet talking this POS into the upward position. Stop to spit curse and wipe the sweat out of your eyes and clean any wounds you got banging your knuckles. Now repeat the first lever steps AGAIN, including going under, going up, and under and in the wheel well so far you find whatever you ran over the other day that made you say “hmm” all over the front of your shirt. Repeat in opposite order when you want to put it down. I’m so embarrassed about this hunk of junk that I stop on the side of the road a half hour before I get to anything I’ve got to pick up just so no one has to see me cursing, crying and throwing a tantrum getting this thing in place. Please don’t buy this item, you don’t deserve this kind of punishment.
Nice solid unit that will definitely last a lifetime but even new this unit is not very user friendly. I have it installed on a 99 c/k3500. Installation of the unit was easy but the 2 levers for raising and locking the ball are not well designed. if you pull the left handle to far, the ball gets stuck in the down position and you have to crawl under the truck and push it back up. The right handle is supposed to somehow lock it into position but I have yet to figure out a reliable system for doing that. I had to shorten both handles to clear the rear tire and with the tire blocking the handles it is difficult and dirty to operate them and usually you smash your hands when the levers do finally go into place. The rubber cap is worthless and generally ends up bouncing out. On my 2nd truck, I went with the style you put the ball in by hand and it is a much easier unit to operate.
What our customers are saying:
"very easy to shop"