bing tracking image

Best Chevrolet Tahoe Trailer Hitch Ball Mounts

change vehicle


Trailer Hitch Ball Mount Videos

MaxxTow Adjustable-Height Ball Mount Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevy Tahoe, well be test fitting the Maxxtow Adjustable-Height Ball Mount for 2 inch hitches, part number MT70067. Before we begin our test fit, well first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. Well get a measurement of about 24-1/4 inches. Keep in mind this measurement may vary due to tire size, hitch style or aftermarket accessories. Well now begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch.



Curt Tri-Ball Mount Review - 2014 Chevrolet Tahoe

Today, on our 2014 Chevy Tahoe, we'll be test fitting the Curt Tri Ball Mount for 2 inch hitches, part number C45001. Before we begin our test fit, we'll need to first obtain the hitch height of our vehicle. The hitch height for this vehicle is about 24 1/4 inches. Keep in mind, this measurement may vary due to tire size, hitch style or added market accessories. Now, we'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. We'll then line up the pin holes and then secure it with a pin and clip. Now, because this ball mount has no drop or rise, if your trailer's ride height matches your vehicle's hitch height, this ball mount would be appropriate for you.



Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevy Tahoe we'll be test fitting the Convert-A-Ball cushioned ball mount for 2" hitches, part number AMSC2. Before we begin our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside of top of the receiver tube. We'll get a measurement of about 24-1/4". Keep in mind this measurement may vary due to tire size, hitch style, or aftermarket accessories. We'll begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. After lining up the pin holes, we'll then secure it with the pin and clip.



Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevy Tahoe, we'll be doing a quick test fit of the convertible, heavy duty cushion ball mount, Part Number AMSC2HD. Now, the first thing we need to do before we install our ball mount, is get the hitch height of our vehicle. Now, the hitch height is the measurement from the ground to the top inside edge of the receiver. And we have about 24 1/4 inches. Keep in mind this measure may vary due to tire size, hitch style or after market accessories. So, now what we can do is in the drop position, we'll slide the ball mount in, line up the pin holes.



Draw-Tite Ball Mount Review - 2014 Chevrolet Tahoe

Today on our 2014 Chevy Tahoe, we'll be doing a quick test fit of the Draw-Tite ball mount, part number 2923. Before we begin our test fit, we'll first need to get the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height is about 24 and a quarter inches. Keep in mind this measurement may vary due to tire size, hitch style or after market accessories. We'll then go ahead, and in the drop position, we'll slide the shank of the ball mount in, line up the pin holes, and secure it with the pin and clip. With the ball mount secured, we'll go over a measurement from the ground to the top of the ball platform, about 22 inches. Now if your vehicle's hitch height matches ours and your trailer's ride height matches this measurement, this ball mount would be appropriate for you.



Diversi-Tech Adjustable Ball Mount Review - 2013 Chevrolet Tahoe

Today on our 2013 Chevy Tahoe we will be test fitting the Diversi-Tech self-locking adjustable aluminum ball mount with two chrome balls with a six-inch drop and a seven-inch rise, right in at 10,000 pounds, part number DTALBM6600. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle, which is the measurement from the ground to the inside top of the receiver tube, and we get a measurement of 24 inches. Now to begin our test fit, in the drop position, we will slide the shake of the ball mount into the opening of the hitch, and turn the lock to engage the interlocking hitch pins on the inside of the ball mount. Now, as you can see, with using the key, you can adjust the length of the drop of the ball mount as well as switching it over to the other ball. We now can flip the ball mount over into the rise position and still see that the ball mount platform can be raised or lowered as well as flipping the ball mount over to use a different size ball. Now when choosing a ball mount for your trailer, you will first need to measure your trailers ride height.



Andersen Rapid Hitch Ball Mount Review - 2013 Chevrolet Tahoe

Today on our 2013 Chevy Tahoe we will be test fitting the rapid hitch adjustable aluminum ball mount gate with two chrome balls for the 5.5 inch drop, part number AM3410. Now before we begin our test fit, we will need to first obtain the hitch height of our vehicle, which is the measurement from the ground to the inside top of the receiver tube, and we get a measurement of 24 inches. Now to begin our test fit, in the drop position, we will slide the shake of the ball mount into the opening of the hitch, line up our pinholes, insert our pin through our pinholes, and secure the clip on either side. You can notice that in the drop position, we can pull the pin here to adjust to the different height of our ball. Well now flip the ball mount over into the rise position and using the same pin that we used to lower it in the draw position, we will pull that pin out to adjust the height of our ball platform. Now, when choosing the best ball mount for your trailer, you will need to measure your trailer ride height, which is the measurement from the ground to the bottom of the coupler when your trailer is level.



Curt Multi-Ball Adjustable Ball Mount Review - 2013 Chevrolet Tahoe

Today on our 2013 Chevy Tahoe we'll be test fitting the Curt Multi-Ball Adjustable Ball Mount for 2 Inch Hitches, part number d900. Now before we begin our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube and we'll get a measurement of 24 inches.Now to begin our test fit in the drop position we'll slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes and secure the clip on the other side. Now with this ball mount you do have access to the three different size balls from the pin here. The ball platform can adjust up and down by the two pins here. We'll now flip the ball mount over into the rise position and as you can see we can still have access to the three different size balls as well as the ability to adjust the ball platform up and down with the two pins here.



Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Chevrolet Tahoe

Today on our 2013 Chevy Tahoe we'll be test fitting the Convert-A-Ball Cushion Ball Mount for 2 Inch Hitches with a 6-3/4 Inch Rise or 8 Inch Drop Rated at 10,000 Pounds, part number amsc8. Now before we begin our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube where we'll get a measurement of 24 inches.To begin our test fit, in the drop position we'll slide the shank of the ball mount into the opening of the hitch, insert our pin through our pin holes and secure the clip on the other side. We'll then measure from the ground to the top of the ball platform and we'll get a measurement of 16 inches. We'll then flip the ball mount over into the rise position and measure from the ground to the top of the ball platform and we'll get a measurement of 31 inches.When choosing a ball mount for your trailer youll first need to measure your trailer's ride height. This is the measurement from the ground to the bottom of the coupler when your trailer's level.



Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Chevrolet Tahoe

Today on our 2013 Chevy Tahoe well be test fitting the Convert-a-ball cushioned ball mount for 2-inch hitches with a 3/4-inch rise or a 2-inch drop rated at 10,000 pounds, part number amsc2. Now before we begin our test fit we will first need to obtain the hitch height of our vehicle which is the measurement from the ground to the inside top of the receiver tube, and we get a measurement of 24 inches. Now to begin our test fit in the drop position well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure it with the clip on the other side. Well now measure from the ground to the top of the ball platform and well get a measurement of 22 inches. Well then flip the ball mount over into the rise position and measure from the ground to the top of the ball platform, and well get a measurement of 25 inches. When choosing a ball mount you will first need to determine your trailers ride height which is the measurement from the ground to the bottom of the coupler.



Draw-Tite Ball Mount Review - 2013 Chevrolet Tahoe

Today on our 2013 Chevy Tahoe well be test fitting the Draw-Tite ball mount 3/4 inch rise or 2-inch drop rated at 6,000 pounds, part number 2923. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube, and well get a measurement of 24 inches. Well now begin our test fit by installing the ball mount on to the vehicle. In the drop position, well slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin, and secure with the clip on the other side. Well then measure from the ground to the top of the ball platform and well get a measurement of 22 inches.