# 1
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Installed easily on 2015 GMC 2500 HD double cab short bed. Plenty of clearance under the bed when ball is flipped. This system makes for a clean useable bed. When I was purchasing this I was concerned about clearance of a gooseneck hitch and my transfer tank. I have a 40 gal tank that sits back from the cab a bit over 20 inches, there’s plenty of clearance for a gooseneck with a fuel tank on this short bed. The hitch has held up perfectly over the last year. I haul around 12k on steep, washboard, gravel roads.
I think this gooseneck hitch is the best for newer Sierra/Silverado HD trucks. I installed it a week ago with the help of my father-in-law and his car lift. Took about 4 hours moving slowly and taking our time. Everything fit well and bolted right up. I also reinstalled the foil heat shield after removing one mounting ear. I did not drop the exhaust or the plastic heat shield and still got everything in. I chose this specific kit because it did not require notching the bed seam when installing the rails. It also has a higher tongue load rating than the others and was cheaper. The only major criticism I have is the pull wire and carriage bolts. My chassis has weld nuts and I would have preferred to use those over carriage bolts pulled into the chassis. I am thankful there were access holes almost inline with the mounting holes. That made it easy to put pressure on the bolt heads so they didn’t fall back. I also think the gasket around the big hole should be one piece to make it look cleaner. I used black silicone rtv to smooth the transition and adhere the gasket in place. Overall I am completely satisfied with the kit and the help of Shawn B who got my order in, had it shipped that same day and followed up with me after delivery. Thanks etrailer and Shawn B.
# 2
Curt Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails, 25,000 lbs GTW
Had to hit one of my rails with a 2 lb sledge just a fuzz to let the tab drop in. The locking tabs are a good idea for the pins. I put my late grandfather’s old classic padlock from his jon boat on one of the tabs. A little nostalgia.
Well built heavy duty fit into the fifth wheel rail with no issue thanks
# 3
Curt EZr Double Lock Underbed Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
Installed as easy as they said it would. Videos are very helpful. Works great!
The hitch itself seems to be of good quality, well made, and there was no need to raise the bed of the pick up. Still, when it was delivered the box seams were open, the big parts were banging around, and the plastic bag containing all the small parts had broken open and the parts strewn about the interior. The ups guy and I picked up all the parts we could find on the driveway and thankfully I only had to make a couple of trips to the hardware store to buy what was lost. Had one of the custom pieces been lost, the 2 hour installation would have stretched into weeks. As it was, without a hoist and air tools it did take a couple of days. The video on this site was of immense help as the printed instructions were all too brief. I would suggest that the video incorporate wide shots periodically so the viewer can orient to the truck before going in for close ups. Finding a 5/8" hole saw was no easy task either but I did find one eventually. As always, its never as easy as it looks on TV.
# 4
Curt Overbed, Folding Ball Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
Etrailer is awesome, not so much for this product. My first and primary issue is that the safety chain u-bolts are positioned to close to the angle iron brackets to allow clearance for them to freely move up and down with the nuts installed (see photos). I can force them up from below with a hammer and stomped them back down from above. This problem is made worse due to the proximity to the ball, if I dont ensure they arent stomped down as much as possible they would interfere with my coupler when turning. I'm honestly still worried about interference if I find myself in any off camber turn. The other problem I have isnt the fault of the hitch, but now that its installed it is still much more intrusive to the bed space when folded flat than I anticipated. In the past I've had under bed mount balls, this being a work truck I thought the cheaper option would work but I regret that decision.
Etrailer has always come through . Even if there is an issue they respond quickly and that means alot . The prices are the best .
# 5
Curt Overbed, Folding Ball Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
Quick Delivery, Direct Fit
Got this for the 01 2500HD Sierra. Metal is extremely thick and strong. However, The holes for the bracket pull the cross bars up to the bottom of the truck better. Makes it seem like a lot of the weight is resting on the bolts and not the crossbars/frame.
# 6
Curt EZr Double Lock Underbed Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
Accurate install directions, fantastic fit and operates perfectly for my 5th wheel RV
After receiving the parts that were missing from the original order, the hitch was finally installed today, it took more then the 3 hours the video implied, I haven't pulled with it yet, but looking forward to it.. The company was very courteous, very helpful, shipped the missing part promptly. I will do business with them again.
# 7
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Unit installed and pulled my fifth wheel to provincetowne Mass. Unhooked and pulled the ball out and picked up some firewood. Nice flat surface. Love it. Only way to go.
Great value and durability. Self install in about 3 hours and has remained solid since then. Put in about 10k miles towing a 31 foot trailer with it.
What our customers are saying:
"I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex"