Most Popular 30000 lbs GTW for Chevrolet Silverado

I bought this for my son, who moved back to the farm, and bought a good used 2002 Chevy duramax so we would have a second truck to pull cattle trailers and haul hay with a fifth wheel flat bed trailer. The B&W underbed turn over ball hitch mounted great and relatively easily. It has performed excellently. My son likes the turn over ball that allows for full use of the pickup box for other uses.

The B&W hitches are the best in the business. I have had 6 of them now from a 92 Dodge, an 07 Dmax, a 2012 HD2500, a 15 Dodge, a 19 HD2500 and a 21 Dmax and now this latest one in an 06 HD2500. I HAVE HAF ZERO ISSUES WITH ALLBOF THESE HITCHES. ZERO!!!!!!!!!. READ the directions and FOLLOW the directions and you will be very satisfied with the results.

Between the videos and the instructions it was very easy to follow. If you’re like me and don’t want to cut your fender liners I simply removed the front bed bolts and jacked one side up to slide in the mounting rails. The only fender I had to cut was the drivers side to allow for the latch pin lever. I really like just how “flush” the hitch really is once you turn over the ball. Overall very impressed with the hitch so far and have already recommended the hitch to other family members and friends.

Click to Enlarge

Click to Enlarge

Click to Enlarge

This hitch is great and I installed it with no problems. This is the hitch to buy if you want quality and strength. The removable ball stores away and is right where you need it.

Installed easily on 2015 GMC 2500 HD double cab short bed. Plenty of clearance under the bed when ball is flipped. This system makes for a clean useable bed. When I was purchasing this I was concerned about clearance of a gooseneck hitch and my transfer tank. I have a 40 gal tank that sits back from the cab a bit over 20 inches, there’s plenty of clearance for a gooseneck with a fuel tank on this short bed. The hitch has held up perfectly over the last year. I haul around 12k on steep, washboard, gravel roads.

Click to Enlarge

Click to Enlarge

I think this gooseneck hitch is the best for newer Sierra/Silverado HD trucks. I installed it a week ago with the help of my father-in-law and his car lift. Took about 4 hours moving slowly and taking our time. Everything fit well and bolted right up. I also reinstalled the foil heat shield after removing one mounting ear. I did not drop the exhaust or the plastic heat shield and still got everything in. I chose this specific kit because it did not require notching the bed seam when installing the rails. It also has a higher tongue load rating than the others and was cheaper. The only major criticism I have is the pull wire and carriage bolts. My chassis has weld nuts and I would have preferred to use those over carriage bolts pulled into the chassis. I am thankful there were access holes almost inline with the mounting holes. That made it easy to put pressure on the bolt heads so they didn’t fall back. I also think the gasket around the big hole should be one piece to make it look cleaner. I used black silicone rtv to smooth the transition and adhere the gasket in place. Overall I am completely satisfied with the kit and the help of Shawn B who got my order in, had it shipped that same day and followed up with me after delivery. Thanks etrailer and Shawn B.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Ok first off. The paint adhesion of any b&w product is probably the worst I've seen for the money. The paint is the first thing that falls off. That being said if you know that already and take some precautions like I did then you can really easily fix this problem. I sandblasted the back half of my frame and did the 3 step por-15 method on everything. I currently live in Indiana and I do seldomly drive it in the winter but I hate rust and will be moving more south shortly. I por-ed every part that came with the hitch. Every bolt and nut got anti-seize. The bolts are also of basic quality and will rust fast. Anything that was metal on metal contact has a layer of marine grease to prevent the from from rusting in between. I'm extra but I felt that this was the only way to go to protect everything. It's still a great product and hasn't let me down yet.

Click to Enlarge

I shopped around for a long time to find this hitch, then I contacted Jessica of etrailer she listened to my wants and helped me find what I needed at the right price. And shipped it to me right away, etrailer is the best. Thank You

I love my hitch . I love how I can turn it over and I can still have use of the full truck bed. I could of bought a cheaper hitch but the quality is by far better than other hitches I have owned in the past. Customer service was great after they helped me fix my ordering mistake. Very happy with my hitch.

I was very satisfied from ordering to instillation. Great people and very concerned about your satisfaction. Instructions were complete and easy to follow. Saved approximately 50% in cost. Thanks etrailer

Came timely and was a complete kit. B&W is by far the best quality turnover ball. Keep it greased and it will work as it should.

A lot of people told me I could not put a goose neck hitch on a 1/2 ton truck. My 2018 Silverado handled the hardware just fine and it pulls an 8,000 lb 3 horse full tack room trailer with ease. I have a 6.5 foot bed - would not recommend this on a 5 foot bed b/c if you jackknife while backing up you will smash your back window. I also recommend installation by a company that does this type of install regularly. I drove an hour to Ocala and had it done at The Hitching Post. They were fair with pricing and easy to work with. Lastly you want to keep a pair of vice grips in your truck to pull up the rollover ball when it is flat. Hay and dust gets in the cracks and it is difficult to pull it up with just your fingers. Overall I highly recommend.

Installed as easy as they said it would. Videos are very helpful. Works great!

The hitch itself seems to be of good quality, well made, and there was no need to raise the bed of the pick up. Still, when it was delivered the box seams were open, the big parts were banging around, and the plastic bag containing all the small parts had broken open and the parts strewn about the interior. The ups guy and I picked up all the parts we could find on the driveway and thankfully I only had to make a couple of trips to the hardware store to buy what was lost. Had one of the custom pieces been lost, the 2 hour installation would have stretched into weeks. As it was, without a hoist and air tools it did take a couple of days. The video on this site was of immense help as the printed instructions were all too brief. I would suggest that the video incorporate wide shots periodically so the viewer can orient to the truck before going in for close ups. Finding a 5/8" hole saw was no easy task either but I did find one eventually. As always, its never as easy as it looks on TV.

Etrailer is awesome, not so much for this product. My first and primary issue is that the safety chain u-bolts are positioned to close to the angle iron brackets to allow clearance for them to freely move up and down with the nuts installed (see photos). I can force them up from below with a hammer and stomped them back down from above. This problem is made worse due to the proximity to the ball, if I dont ensure they arent stomped down as much as possible they would interfere with my coupler when turning. I'm honestly still worried about interference if I find myself in any off camber turn. The other problem I have isnt the fault of the hitch, but now that its installed it is still much more intrusive to the bed space when folded flat than I anticipated. In the past I've had under bed mount balls, this being a work truck I thought the cheaper option would work but I regret that decision.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Etrailer has always come through . Even if there is an issue they respond quickly and that means alot . The prices are the best .

Quick Delivery, Direct Fit

Got this for the 01 2500HD Sierra. Metal is extremely thick and strong. However, The holes for the bracket pull the cross bars up to the bottom of the truck better. Makes it seem like a lot of the weight is resting on the bolts and not the crossbars/frame.

Great product, handled my 18,000lb GVW 5th Wheel with-out issues. Fast delivery and great customer service too!

product came on time, well packaged, putting unit together was fairly easy only problem we had was getting the bolts out of the truck bed so we could lift it up to slide the rails in.

Accurate install directions, fantastic fit and operates perfectly for my 5th wheel RV

Click to Enlarge

After receiving the parts that were missing from the original order, the hitch was finally installed today, it took more then the 3 hours the video implied, I haven't pulled with it yet, but looking forward to it.. The company was very courteous, very helpful, shipped the missing part promptly. I will do business with them again.

I got a reduce price on a B&W weld in five wheel ball mount do to cosmetic scathing on tow ball which was almost non excestant save 65 dollars as usual B&W makes the most high qaulty parts and e trail are always excellent shipping was faster than they said. Thx again for passing on the savings to the customer

Came in a timely manner, about a week from the time I ordered it to it delivered to my door step in Alaska. The hitch itself is very high quality with nice clean welds and sharp clean edges which took almost no prep work to weld in to the frame I had built for it. You could tell by looking at this that B&W uses nice welding equipment and employs quality welders. Overall very happy with this. Installed on Monroe flatbed on F-450 cab and chassis truck.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Seems to be good quality, fairly heavy built. The ball locking pin does not fully move to the lock/unlock position using the release handle. I'm not sure if it is out of alignment, or maybe has some paint/coating buildup, but I have to pry the pin to lock/unlock the ball from the hitch. I would have hoped for better. Install was pretty easy, the instructions were decent, however, I think the pictures could be better and more of them. They were very dark in color and difficult to see. I also found some of the bolts impossible to reach with a torque wrench to tighten. I suppose there are torque wrenches that could fit in the tight spots, I just do not have one.

Unit installed and pulled my fifth wheel to provincetowne Mass. Unhooked and pulled the ball out and picked up some firewood. Nice flat surface. Love it. Only way to go.

Great value and durability. Self install in about 3 hours and has remained solid since then. Put in about 10k miles towing a 31 foot trailer with it.

Very nice and well built product, the instructions made sense and were very logical. nice to have made in the USA things available. Would highly recommend!

Install went easy, hitch works great. Only issue was the measurement to drill hole in bed of truck bed was off by ½".

Great!

great company. order shipped extremely fast, had a problem with ups losing 1 piece but they sent another out as soon as they found out what happened. i cannot give this company enough praise.

Difficult to determine installation ease, as I had the bed off my truck while installing. That made it very easy, but instructions were good and its a straightforward process. Very well made, and fit precisely on my truck. I think the B&W system is very tough to beat. Solid and dependable. And their after sale customer service is excellent.

Click to Enlarge

Great service and a great product! Quick delivery and good communication regarding status. Of course it’s a great hitch, it’s a B&W…

Click to Enlarge

Click to Enlarge