bing tracking image

Most Popular Trunk Bike Racks for Chevrolet Impala

change vehicle


Bike Rack Videos

Saris Trunk Bike Racks Review - 2016 Chevrolet Impala

Today on our 2016 Chevrolet Impala we're going to be taking a look at the Saris SuperBones Trunk Mount 3-Bike Rack. Now as you can see we already have our bike securely mounted. You're going to have three mounting points, two on top and one on the vertical support. Now the way we're going to bike off is simply push in on this tab which will release the strap and pull it up. We'll do the same thing for the other two. We can lift our bike right off.



Yakima Trunk Bike Racks Review - 2016 Chevrolet Impala

Today on our 2016 Chevrolet Impala we're going to be taking a look at the Yakima Half Back Trunk Mount 2 Bike Rack, part number Y02636. As you can see we already have our bike securely mounted to the bike rack, and they're going to have two points on top, and one on the vertical part of the frame here. To take the bike off simply push in on the tabs, pull the zip strip out, and our bike will come right off. Now it is a good idea to always go ahead and replace these, that way we don't have to worry about them getting lost or damaged. With our bike off we'll go ahead and take a quick few measurements. Overall this bike rack's going to add right around about 24-1/4" to the overall length of the vehicle. Now we do have the option to rotate the arms down to give us a little bit more room.



Yakima Trunk Bike Racks Review - 2016 Chevrolet Impala

Today on our 2016 Chevrolet Impala we're going to be taking a look at the Yakima FullBack trunk-mount 2-bike rack, part number Y02634. Now as you can see, we already have our bike securely mounted on our bike rack. You're going to have two points here at the top and one here on the vertical support. To remove the bike, simply push in on the tabs, pull the Zip Strip out, and now we can take our bike off. It's a good idea to put these back so they don't get lost or damaged. They just slide right into place. Now with the bike off, we'll get a quick few measurements.



Thule Trunk Bike Racks Review - 2016 Chevrolet Impala

Today on our 2016 Chevrolet Impala, we're going to be doing a test fit of the Thule Gateway XT Trunk Mount Two-Bike Rack. As you can see we already have our bike securely mounted to the bike rack. You got three mounting points, two on the crossbar here and one right here. To take it off, simply pull the straps off, and we can take our bike right off. With the bike off, we'll take a few quick measurements. Overall, we're going to be adding right about 13-1/4" to the total length of the vehicle. Now, we do have the option to swing our arms down to give us a little bit of extra room.



Thule Trunk Bike Racks Review - 2016 Chevrolet Impala

Today on our 2016 Chevrolet Impala we're doing a test fit of the Thule Raceway Pro trunk-mount 2-bike rack. That part number is TH9001PRO. Now we already have our bikes secured down. We're first going to show you how we do that. We have two cradles on top of our frame here and we have one as our anti-sway cradle in the back. We're going to pull down and lift up to release those.



Thule Archway Trunk Bike Racks Review - 2016 Chevrolet Impala

Today on our 2016 Chevrolet Impala we're doing a test fit of the Thule Archway XT Trunk Mount 2-Bike Rack. That part number is TH9009XT. Now we already have our bike secured down. We're first going to show you how we do that. We have three cradles in total, two on top here at our frame, and one as our anti-sway in the back. We're going to start by pulling down and lifting up to release those, and we'll be able to pull our bike off, and set it off to the side.



Thule Passage Trunk Bike Racks Review - 2016 Chevrolet Impala

Today on our 2016 Chevrolet Impala we're doing a test fit of the Thule Passage trunk-mount 2-bike rack. That part number is TH910XT. Now we already have our bike secured down. We're first going to show you how we secure it in place. We have three straps altogether. We've got two over the top frame of our bike and one here at our downpost.



Malone Trunk Bike Racks Review - 2015 Chevrolet Impala

Hi everyone. It's Evangeline here at etrailer. And today we're looking at the Malone Runway two bike, back of the car, trunk mounted bike rack here on our 2015 Chevrolet Impala. So the Malone Runway is a nice and simple bike rack, especially if you're looking for something that is quick to put on your vehicle, as well as affordable. Also, if you are looking for a compact bike rack that you can store in the trunk of your Impala, this may be a good option for you. So first let's take a look at the way our bike is mounted to this bike rack.



Yakima QuickBack 2 Bike Rack Review - 2012 Chevrolet Impala

Today on our 2012 Chevrolet Impala we'll be test fitting the Yakima QuickBack 2 trunk-mounted carrier, part number Y02621. Before we begin our test fit we'll first need to check out the instructions or the Yakima fit guide to determine the placement of this on our vehicle. We'll go ahead and set the carrier onto the vehicle. You may need to adjust it by undoing the red knob located directly behind the cradle arms. We'll then put the top hooks to the top part of the trunk, the side hooks to the side part of the trunk, next to the taillights and the bottom hooks at the bottom part of the trunk. We'll then tighten down the straps to secure the carrier to the vehicle.



Thule Gateway Trunk Mount Bike Rack Review - 2012 Chevrolet Impala

Today on our 2012 Chevrolet Impala well be test fitting the Thule Gateway two bike trunk mounted carrier, part number TH9006XT. To begin our test fit, we will first need to check the Thule fit guide or the included instructions to see what number our fit knob needs to be at. Well set our fit dial to seven and set the carrier onto the trunk. Well put the top hook to the top part of the trunk, the side hook to the side part of the trunk next to the taillights, and the bottom hook at the bottom part of the trunk. Well then tighten down the straps to secure it to the vehicle. Once the carrier is secured to the vehicle were ready to load our bike.



Thule Raceway Platform Trunk Bike Rack Review - 2012 Chevrolet Impala

Today on our 2012 Chevrolet Impala, well be test fitting the Thule Raceway Platform-Style 2 Bike Carrier Trunk Mount, part number TH9003. Now before I begin our test fit, well first need to double check with Thules Fit Guide or the included instructions to determine the fit dial number for this vehicle. Well set the fit dial to number seven and set the carrier onto the vehicle. Well put the top hooks to the top part of the trunk, the bottom hooks to the bottom part of the trunk and well turn the knobs from the left and right side of the carrier to tighten them down. Once the carrier is secured to the vehicle, well ready to load our bike. Well lower the platform, undo the grey levels at each end of the wheel tray, well slide them out and undo the straps.



Thule Raceway Trunk Bike Rack Review - 2012 Chevrolet Impala

Today on our 2012 Chevrolet Impala, well be test fitting the Thule Raceway 2 Bike Carrier Trunk Mount, part number TH9001. Now before I begin our test fit, well first need to check the Thule Fit Guide or the included instructions to determine what number dial needs to be at. Well set our fit dial at seven and set the carrier onto the vehicle. Well put the top hooks to the part of the trunk, the bottom hooks to the bottom part of the trunk and turn the knobs looking at each side of the carrier to tighten them down and secure the carrier to the vehicle. Once it is secured to the vehicle, were ready to load our bike. Well lift up the grey lever located at the center of the carrier to swing out the cradle arms.



Thule Passage Trunk Mounted Bike Rack Review - 2012 Chevrolet Impala

Today on our 2012 Chevrolet Impala, we'll be test fitting the Thule Passage 2 Bike Carrier Truck Mount, Part Number TH910XT. Now, before we begin our test fit, we will first going to check the Thule fit guide for the included instructions to determine the fit dial number. This fit dial will be set at 7. Now, we'll set the carrier on to the vehicle, we'll put the top hooks to the top part of the trunk, the side hooks to the side part of the trunk next to the tail light and the bottom hooks to the bottom part of the trunk. We'll then tie the straps to secure it to the vehicle and then secure the extra strap. Now that it's secured to the vehicle, we're ready to load our bike.



Malone Trunk Bike Racks Review - 2008 Chevrolet Impala

Speaker 1: Today on our 2008 Chevrolet Impala, we're going to be test fitting the Malone Hanger 3 Trunk Mount Bike Rack, part number NPG2142. We already have a bike installed on the rack. Let's take a closer look and show off some of the features.The cradles are adjustable back and forth and side to side and can be tightened down with this Phillips head screw, here, and they are padded as well as they have these grooves on the inside of them, here, so the cables your bike can rest inside there instead of being smashed up against the frame once you install your bike.It does have these very flexible strips to tighten them down and there's only going to be two points of contact and that's going to be these points at the top frame. It does also come along with this stabilization strap, here. We only have it wrapped on our tire just to make sure it doesn't make contact with our vehicle, but it does come with two straps that you would put around all three bikes as well as the bike rack itself to keep everything together and keep it from moving back and forth while you drive.There is an issue that I'd really like to point out, here. In this particular case with how we have this set up, the pedal may make contact with your vehicle, so you may need to have something, a pad of some sort, to wrap around your pedal to make sure it doesn't damage your vehicle once you drive.Let's go ahead and take the bike off and set it aside.



Malone Trunk Bike Racks Review - 2008 Chevrolet Impala

Speaker 1: Today in our 2008 Chevrolet Impala, we're gonna be test fitting the Malone Hanger 3 Bike Rack for the truck mounts. Part number MPG2139. We already have a bike installed on the rack. Let's take a closer look, and show off some of the features. How the bike attaches to the rack, we're gonna have three points of contact. We're gonna have two straps up at the top tube gear, and you'll have two choices as to where to make those connections.



Malone Trunk Bike Racks Review - 2008 Chevrolet Impala

Today on our 2008 Chevrolet Impala, we're gonna be test-fitting the Malone Pilot 2 Bike Platform Rack for Trunk Mounts, part number: MPG2133. We already have a bike installed on the rack. Let's take a closer look and show off some of the features. What makes this bike rack pretty unique is the fact that it's a platform style that does mount to your trunk, as opposed to in most of them, which are the hanging style. It grips your bike at three points. We're gonna have this frame mount up here at the top.



Thule Trunk Bike Racks Review - 2008 Chevrolet Impala

Today on our 2008 Chevrolet Impala we're doing a test fit of the Thule Raceway PRO Trunk Mount 2 Bike Rack. That part number is TH9001PRO. Now we already have our bike secured down. We're first going to show you how we secure it in place. We have two straps on the top of our frame here and one as our anti-sway strap in the back. We're going to pull down and lift up to release those.



Thule Archway Trunk Bike Racks Review - 2008 Chevrolet Impala

Today on our 2008 Chevrolet Impala we're doing a test-fit of the Thule Archway XT Trunk Mount 2-Bike Rack, that part number is: TH9009XT. Now we all ready have our bike secured down, we're first going to show you how we do that. We have three straps all together. We've got two over the top portion of our frame and one to the side as our anti-sway strap here. To remove those, we're going to pull down and lift up. Then we'll be able to take our bike off and set it off to the side. Now in this case we have had to use a wheel strap to hold our bike in place, you can find those at etrailer.com. Next, we're going to take a few measurements here.



Thule Passage Trunk Bike Racks Review - 2008 Chevrolet Impala

Today on our 2008 Chevrolet Impala, We're doing a test fit of the Thule Passage Trunk Mount Two Bike Rack. That part number is TH910XT. We already have it secured onto our trunk. We're first going to show you how we secured on our bike. We have three straps altogether. We've got two over the top portion of our frame and one is our anti-sway strap in the back.



Thule Archway Trunk Bike Racks Review - 2001 Chevrolet Impala

Today on our 2001 Chevrolet Impala we're doing a test fit of the Thule Archway XT trunk-mount 2-bike rack. That part number is TH9009XT. Now we already have our bike secured down. We're first going to show you how we do that. We have two cradles in place with three straps, two on our frame and one as our anti-sway strap in the back we're going to start by pulling down and lifting up to release those. Then we'll be able to pull our bike off and set it off to the side. With that out of the way we'll take a few measurements.



Thule Passage Trunk Bike Racks Review - 2001 Chevrolet Impala

Today on our 2001 Chevrolet Impala we're doing a test fit of the Thule Passage trunk-mount 2-bike rack. That part number is TH910XT. Now we already have our bike secured down. We're first going to show you how we do that. We have two cradles in place with three straps, two on our frame and one as our anti-sway strap in the back. We're just going to pull down and lift up to release those.





Chevrolet Impala Bike Rack Questions