Most Popular Roof Bike Racks for Chevrolet Cruze

Inno Roof Bike Racks Review - 2015 Chevrolet Cruze

Today in our 2015 Chevrolet Cruz, we're going to take a look at the Inno Fork Lock Roof Mounted Bike Carrier. The part number is INXA391. I have the bike on a rack and we have the rack hooked to our vehicle. Let's go show you a few features of it. This is a fork mounted bike rack as you can see. We have our skewer here. It's already engaged.

Thule Roof Bike Racks Review - 2015 Chevrolet Cruze

Today on our 2015 Chevrolet Cruise, we're going to show you the Thule ThruRide roof bike rack. Part number is TH535. Now we have a bike on our rack and we have our rack hooked to our vehicle. Alrighty, I'm just going to show you a few features of it. Now this is a fork-mounted bike rack as you can see. We have our skewer here.

Rhino Rack Road-Warrior Roof Bike Racks Review - 2015 Chevrolet Cruze

Today on our 2015 Chevrolet Cruze, we're going to show you the Rhino-Rack Road Warrior Rooftop Bike Carrier. That part number's RBC036. I have a bike on the rack and we have the rack hooked to our roof. I'm just going to show you a few things about it. This is a fork mounted bike rack. You see up front here, see the forks are in our little skewer and its engaged. To un-engage it, you just pull back, loosen it over there, and we can take off our bike. I'm going to show you some more things.

Inno Roof Bike Racks Review - 2015 Chevrolet Cruze

Today on our 2015 Chevrolet Cruze, we're going to take a look at the INNO Tire Hold Roof Bike Rack. Part number is INA389. We have a bike on our rack. We have the rack hooked up to our roof. All right. I'll show you a few things about it. The first thing I can show you, this is a wheel mounted bike rack and you see we have our wheel holders in the front and in the back. Both our wheels are sitting in wheel cradles, we have the one in the front and the one in the back. The one in the back can be adjusted. I just want to show you a few things before we take our bike off. How do we disengage it We're going to life up on here. It also has a key, so if you wanted to leave your bike on your vehicle, that's good for your anti-theft. We're going to go ahead and hold on to our bike, pull that out, push this forward as much as we can, and take off our bike, set it off to the side. How our bike engages, like I said, right here this is pretty much the key that we need.

Inno Roof Bike Racks Review - 2015 Chevrolet Cruze

Today on our 2015 Chevrolet Cruze we are going to take a look at the INNO Multifork lock roof bike carrier. Part number INA392. No we have a bike on our rack and we have our rack hooked up to our vehicle. I'm just going to show a few features of it. This is pretty much a fork mounted bike rack. As you can see we have our skewer engaged, I'll go ahead and show you that. This is an extra precaution or extra security.

RockyMounts Roof Bike Racks Review - 2015 Chevrolet Cruze

Today on our 2015 Chevy Cruise we're test fitting the Rocky Mounts BrassKnuckles roof mounted bike rack. It is a wheel mounted bike rack, and the part number for that is RKY-1202. Now, as you can see we do already have our bike mounted on there and strapped in. We're going to show you how we strap it in, and then also how we connect our carrier to our crossbars. We're going to start in the back, back here with the back tire with the strap we're just going to push up on the lever and release the strap. You're going to make sure any time you strap in your bike like this you want the strap to come between the spokes so it doesn't damage them. We're going to come up here and release this strap here on the front wheel, just like that.

Rhino Rack MountainTrail Roof Bike Racks Review - 2015 Chevrolet Cruze

Today on our 2015 Chevi Cruise, we're test fitting the Rhino Rack Mountain Trail Rooftop Bike Carrier, part number RBC-035. Now, as you can see, we do already have our bike up on the carrier. We're going to show you how we secure the bike down. Then also, how we secure the carrier to your crossbars. All right. If we check out the back right here, we're going to look at the back tire and see that we have a strap.

Kuat TRIO Roof Bike Racks Review - 2015 Chevrolet Cruze

Today, on our 2015 Chevy Cruz, we are test fitting the Kuat Trio, Part# TR02. This is a roof mounted bike rack. It's also a fork mount. We're going to show you how we put the bike on here, and also how it connects to our crossbars. As you can see, the bike is here. The tire's held in by this strap. You just push down on this little lever here and feed the strap through, and then put it on the other side of the bike.

Yakima ForkLift Roof Mounted Bike Rack Review - 2014 Chevrolet Cruze

Today on our 2014 Chevrolet Cruze. We're going to be test fitting the Yakima Forklift roof mounted bike rack. Part number Y02098. With the Yakima Q Tower roof rack already assembled on our Cruze. We're going to begin our test fit by placing our bike rack directly onto our crossbars. Here at the front, we'll remove the skewer. Side back the black plastic cover.

Yakima FrontLoader Roof Bike Rack Review - 2014 Chevrolet Cruze

Today on our 2014 Chevrolet Cruze we're going to be test-fitting the Yakima Front Loader, a wheel mount bike rack, part number Y02103. With our Yakima Q Towers Roof Rack already assembled on our Cruze, we'll begin our test-fit by placing our bike rack directly onto our cross bars. On the front cross bar we'll want the two outside parts of the clamp and the front of the bar and the one center piece of the clamp behind it. We'll now use the black T handle to tighten both halves of our clamp around our front cross bar. With this tight, we'll move to the rear. Here at the rear we're going to loosen the black T handle and remove the T bolt form the lower half of the clamp. We'll then bring it around our rear cross bar, reinsert the T bolt into the appropriate slot and tighten it with our black T handle.

Swagman Fork Down Roof Bike Rack Review - 2014 Chevrolet Cruze

Today on our 2014 Chevrolet Cruze, were going to be test fitting the Swagman Fork Down Roof Mounted Bike Rack, part number S64710. With the Yakima Q Towers Roof Rack System already on our Cruze, were going to begin our test fit by placing our bike rack directly onto our load bars. Here at the front were going to take one of the U-bolts, bring it around our crossbar, and up through the head of the rack. Well then use the two wing nuts to secure this in place. You can now move to the other side of the head of the rack and do the same thing with another U-bolt and 2 wing nuts. Now with all 4 of these secure, we can move to the rear. Here were going to take one of the U-bolts and put it down through the rack, being sure that one of the arms comes out on each side of our crossbar. Well then put on the black metal plate, secure this in place using 2 wing nuts. Once we have these secure, were ready to load up our bike.

SportRack Roof Mounted Bike Rack Review - 2014 Chevrolet Cruze

Today on our 2014 Chevrolet Cruze, we're going to be test fitting the Sportrack Roof Mounted Bike Rack, part number SR4622. With the Yakima Q Towers Roof Rack System already installed on our Cruze, we're going to begin our test fit by placing the bike rack directly onto our load bars. At the front of the rack, we'll bring the two black rubber coated metal U bolts around the underside of our bar and through the head of the carrier. At the top, we'll then secure it using two wing nuts. We'll repeat the same process for the other side of the head of the carrier. With all four of our wing nuts secure in the front, we can move to the rear. The first step will be placing the black plastic part of our clamp in between our roof rack and our crossbar.

Kuat TRIO Roof Bike Rack Review - 2014 Chevrolet Cruze

Today on our 2014 Chevrolet Cruze we're going to best fitting the Kuat Trio, a roof mounted bike rack, part number RU01. With our Yakima Q Towers Roof Rack System installed on our vehicle, we're going to begin our test fit by placing the bike rack directly onto our crossbars. At the front we'll take one of the black rubber coated metal u-bolts, place it around our load bar, and up through the head of the carrier. We can then thread on two cylinder nuts to hold it in place. We'll now take the second u-bolt and place it on the other side of the head of the carrier, thread on the two cylinder nuts here, and then we can take the provided tool and tighten them down. With all four cylinder nuts in the front tight, we'll move to the rear. Here we're going to completely remove one of the wing nuts, move the bolt so we have one on each side of our crossbar, bring the bolt back through the clamp, thread on our wing nut, and tighten them down.

RockyMounts TieRod Stretch Roof Bike Rack Review - 2013 Chevrolet Cruze

Today, on our 2013 Chevy Cruze, well be test fitting the RockyMounts TieRod Stretch Roof Mounted Bike Rack, part number RKY1011. Well begin our test fit by placing the bike rack up on to the vehicles roof rack. Well then remove the black plastic cover at the front to bring our rubber coated steel straps around the underside of the front bar and hook them into the connection point. Well then move to the rear, remove one of the Allen bolt with the included Allen wrench to slide the rear bracket around the underside of the rear bar. Well then reinstall the Allen bolt and tighten it down with a wrench. Now, moving back up to the front, well use the included Allen wrench to the turn the silver bolt to tighten on the straps helping us at front bar. With everything all tightened down and secured, we're ready to load up our bike.

Swagman Fork Down Roof Bike Rack Review - 2013 Chevrolet Cruze

Today on our 2013 Chevy Cruise, we'll be test fitting this Swagman Fork Down Roof Mounted Bike Rack, part number S64710. We'll begin our test fit by placing the bike rack up onto the vehicle's bars. We'll then take the silver brackets to go on the underside of the front bar, up into the pre-drilled holes of the front of the bike rack. We'll then take the black wing nuts to thread onto the threads of our bracket to secure the front part of the bike rack to the front bar. We'll then repeat the same steps for the other bracket. Now, moving to the rear of the bike rack, we can take the silver bracket and this time, slide it over top of the bar through the pre-drilled holes in the bike rack; taking the black plate to rest on the underside of the bar and threading on our wing nuts to tighten it down. Once everything is all tightened down and secured, we're ready to load up our bike. We'll place our bike up on the bike rack, sliding the forks down onto the skewer.

Yakima FrontLoader Roof Bike Rack Review - 2013 Chevrolet Cruze

Today on our 2013 Chevy Cruze, well be test fitting the Yakima Front Loader Roof Mounted Bike Carrier, part number Y02103. Now with our roof rack system already assembled onto the vehicle, well begin our test fit by placing the carrier onto the vehicles crossbars. Well set the front of the carrier around the front crossbar and loosen up the rear bracket to bring it around the rear crossbar. Well then tighten down the rear bracket and move back up to the front of the carrier where we will turn the black T-handle to tighten down the front of the carrier to secure it to the crossbar. Now with the carrier secured to the vehicle, were ready to load our bike. Well first undo the rear strap and sat our bike onto the carrier.

Yakima ForkLift Roof Mounted Bike Rack Review - 2013 Chevrolet Cruze

Today on our 2013 Chevy Cruise, we'll be test fitting the Yakima Forklift roof mounted bike carrier, part number Y02098. Now with the roof rack system already assembled on our vehicle, we'll begin our test fit by placing the carrier onto the vehicle's cross bars. We'll bring the front bracket around the front cross bar and tighten down the black wing nut to secure the front of the carrier to the cross bar. We'll then move to the rear of the carrier, where we will tighten down the black wing nut to secure the rear of the carrier to the vehicle. We'll then move back up to the front of the carrier, where we will remove the skewer. After tightening the wing nut, slide the black plastic cap back onto the carrier, and slide the skewer through.

RockyMounts TieRod Roof Bike Rack Review - 2013 Chevrolet Cruze

Today on our 2013 Chevrolet Cruse, well be test fitting the RockyMounts Tierod Roof Mounted Bike Carrier, part number RKY1014. Now with our roof rack system already assembled onto the vehicle, well begin our test fit by placing the carrier onto the vehicles crossbars. Well remove the front black plastic cap to swing the rubber coated steel straps around the front crossbar and well then use the on wrench to tighten them down to secure the front of the carrier to the vehicle. Well then replace the black plastic cap and move to the back of the carrier where we will loosen up the Allen bolts to bring that bracket around the rear crossbar. Well then tighten that down to secure the carrier to the vehicle. Now were ready to load our bike.