# 1
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
The 3rd piece of a great package, tow hitch, wiring harness, & ball mounting kit. I have two trailers, that ride at different heights. This really completed the install nicely. Everything went seamless from order to delivery. Installed on 2014 Tacoma.
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75238, purchased with Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - C56282 and Ball Mount Kit for 2" Hitches - 7,500 lbs - 989900. Installation instructions not updated for 2017 Tacoma; There is no bumper rail, wiring schematic not complete. Installation is nonetheless easy and works fine. Ball height perfect for Tractor Supply North Star trailer.
# 2
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Not much to it. Good welds, quality paint. Can't say enough about Etrailer , fantastic supplier.
great product fit perfectly nice painted finish i wish every product out there was like a e-trailer product ! highly recommended
# 3
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Have not used and may not. May try returning and see how that works. After installing the DrawTite hitch I see the 2" drop on this insert will be too low. Shame on me for not thinking this through prior to ordering.
I had received multiple quotes to install a hitch on my 2014 Toyota Tacoma. All were around $400. So I did a little research and found the etrailer.com site. I found I could buy the hitch, the wiring harness and ball myself for less. The installation video they provided me gave me the confidence I could do the install myself. Now it's on and the entire process couldn't have been easier. If you can use a socket wrench and screw driver you can install your own hitch. Piece of cake!
# 4
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
The Draw-tite ball mount is just what I needed but I wanted to comment on customer service. Shipping on this product was ridiculously fast. I ordered that afternoon and was notified that it shipped the same evening. Had it at my house in three days. Great service, Thank you.
Now i can open my tail gat on my 2018 toyota Tacoma without hitting my trailer jack
# 5
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I trust Curt products and this exceeded my expectations. Also you can't find any better customer service than etrailer.com on the web. Fast shipping too.
I have purchased from Etrailer several times and each time the items arrive on time, packaged very well and are exactly as advertised. I will be buying from Etrailer in the future and will recommending to my friends. Thanks
# 6
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
If you have a trailer with a short tongue, like I do, this Hidden Hitch Extra Long Ball Mount is a big help! I bought a 2021 Nissan Frontier, which has a taller tailgate than the Tacoma I previously used, and found that when the tailgate was down so I could see to back my trailer to load my boat, that I only had about 2 to 2-1/2 inches of clearance between the tailgate and the winch mounting post, and I would damage the tailgate and/or winch post when making a tight turn. I went online to find a longer hitch mount, and found this one. Not only does it solve the problem, but the longer hitch mount actually makes the trailer easier to back than a regular mount! The only negative I have to say is that the hole drilled in the long mount for the pin to go through to secure it to the hitch receiver was drilled offcenter, and as a result it is not flush in the receiver and tilts the longer hitch mount at a slight sideways angle. This results in the trailer hitch catching on the ball when I go to raise it, and you it takes the force of continuing to raise the trailer to get the hitch off the ball.
Needed to get more clearance between boat trailer and truck so I could still lower tailgate or make tight turns without worrying. Didn't want to give up towing capacity or tongue weight by using a hitch extension. This solved my problem and fit well in the Class 3 factory tow hitch that came with my 2013 Toyota Tacoma.
# 7
Ball Mount Adjustable with Sway-Control Tab, 6,000 lbs
The ball mount did not fit onto the shank. This was a very disappointing experience.
The fit of the U channel for the ball mount was too tight over the verticle drilled box tube. It needed “persuasion” to get it over the tube. This will make height changes away from the shop difficult. No rattle though.
# 8
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
I needed a drop hitch because my Toyota Tacoma has a suspension lift. The biggest drop I could find locally was 8”. As usual etrailer.com has what I need. This 12” drop worked great to get my trailer to sit level.
I like it. I have a few thousand miles on it by now pulling a 2015 MINI on a uhaul auto transport trailer with a 2020 Tacoma and I think it helps keep a smooth ride. I’ve pulled with it from Phoenix to Seattle and back, and recently from Phoenix to Lewes Delaware. Before my first trip with the hitch I got into a lengthy debate over whether or not I had wasted my money on the entire concept of this hitch or not. The first time I pulled an empty trailer with it, I thought maybe I had fallen for a slick pitch because it wasn’t all too different than any other trip with a trailer bouncing around behind me. I pulled the trailer around my neighborhood on streets that I knew for a few laps around the block, then switched hitches back to my old solid one and did the same route and there was indeed a difference with this hitch. It won’t make the bumps and tugs disappear but it will noticeably mute them. Along all of my tows there have been stretches of road where I have thought to myself I’m glad I have this hitch and wonder how much worse the ride would have been without it. The trailer I use has surge braking and there was a concern that the horizontal movement of the hitch could trigger the brake but I haven’t noticed that to be an issue. I recommend the product but if you don’t buy this hitch, use etrailer for whatever you do buy. THE BEST service, fast shipping, great communication, I appreciate this site so much. Every internet shopping trip starts at etrailer, if they sell what I need I’ll buy it here. I want them to stay around for as long as possible, they remind me of what service and support from a business is supposed be and I’m happy to do what I can to keep them around. I’m glad I found etrailer, thanks!
# 9
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
I like it. I have a few thousand miles on it by now pulling a 2015 MINI on a uhaul auto transport trailer with a 2020 Tacoma and I think it helps keep a smooth ride. I’ve pulled with it from Phoenix to Seattle and back, and recently from Phoenix to Lewes Delaware. Before my first trip with the hitch I got into a lengthy debate over whether or not I had wasted my money on the entire concept of this hitch or not. The first time I pulled an empty trailer with it, I thought maybe I had fallen for a slick pitch because it wasn’t all too different than any other trip with a trailer bouncing around behind me. I pulled the trailer around my neighborhood on streets that I knew for a few laps around the block, then switched hitches back to my old solid one and did the same route and there was indeed a difference with this hitch. It won’t make the bumps and tugs disappear but it will noticeably mute them. Along all of my tows there have been stretches of road where I have thought to myself I’m glad I have this hitch and wonder how much worse the ride would have been without it. The trailer I use has surge braking and there was a concern that the horizontal movement of the hitch could trigger the brake but I haven’t noticed that to be an issue. I recommend the product but if you don’t buy this hitch, use etrailer for whatever you do buy. THE BEST service, fast shipping, great communication, I appreciate this site so much. Every internet shopping trip starts at etrailer, if they sell what I need I’ll buy it here. I want them to stay around for as long as possible, they remind me of what service and support from a business is supposed be and I’m happy to do what I can to keep them around. I’m glad I found etrailer, thanks!
etrailer.com always gives excellent service. You can depend on them.
# 10
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
I purchased this unit to extend the trailer jack handle just far enough that I could open the tailgate on my truck with the trailer attached. It worked perfect. I tow a pop-up camper with 2006 Toyota Tacoma. Pricing was good and delivery was quick from etrailer. At first I tried to buy locally from auto parts store or camper store, but neither had in stock anything the right dimensions. The unit from etrailer is made in the USA, fit just right, and was better quality than what I saw locally.
I have a Toyota Tacoma pulling an A-Liner Expedition. Used a Ball and Ball mount from Wal-Mart last year. I upgraded to this and heavier rated Ball, and we noticed an immediate difference. E-Trailer staff, keep doing what you are doing. Your company and products have just earned a loyal customer. Thank You!!
# 11
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 12
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
New class 4 ball hitch for my new Tacoma. Good fit. Seems indestructible.
The product worked as advertised. Out of all of the stuffed that I've seen in the stores this receiver is by far the most durable i've come across.
# 13
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Just what i needed to get my trailer back far enough so my trailer jack would not hit my tailgate on my 2016 Toyota Tacoma,,,,,and i also installed a Malone hitch tightener,,,,so now i have more room for the jack and everything is tight and quite,,,,,should have did this along time ago,,,,,both are great products,,,,fast shipping also......Thanks
The ball mount arrived undamaged and in a very timely manner. It is exactly as described and worked well for my application. I was very impressed with how fast this item arrived and the care given to the packaging. Other online sites have sent me similar items packaged so poorly that they frequently received damage. But etrailer staff were extremely diligent about how to package a heavy item, therefore no damage. Will certainly use etrailer again.
# 14
Rapid Hitch Adjustable Aluminum Ball Mount Kit - 2 Zinc Balls - 5-1/2" Drop, 6-1/2" Rise
Sooooo....you sent me a product that was somehow put together backwards and I cannot take them apart somehow the ballhitch is stuck on the male portion backwards and defies gravity and doesn’t need a pin to stay on(becaue thier is no where to put the pin in cause it’s backwards
Have done about 5k with this hitch, just once with a 4500lb camper but mostly with a 3000lb cargo trailer. The former in a highly raised position and the latter in the absolute bottom position. The hitch has worn very well and shows no signs of excess wear, save for the surface of the 2" ball, but it's not concerning. On a Jeep Grand Cherokee with a stock suspension, this seems to give the right balance of range of adjustment without dropping so low in the lower configuration as to scrape through dips, though it can still be done on very sharp dips with the hitch on the lowest setting. Overall, very pleased with it and love that it's lighter than steel and won't rust.
# 15
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
Trailer hitch, quick service. What else is there to say
Exactly as described, well packaged and very prompt standard delivery (sort of surprising for such a heavy item). Looking forward to boating season with my new ride !
# 16
Flash Secure 2-Ball Mount w/ Chrome Balls - 2" Hitch - 4" Drop, 5" Rise
Required a bit of gentle sanding to fit into my receiver. I hated to scuff up the mirror finish. Looks great on my lifted Tacoma. The locking mechanism & reversible slide ball and no rattle design is genius. 4 keys, I like that too. I wish more things were built this way.
Love the design with no locking through pins to worry about. Only reason for three stars is I received the product with cosmetic damage from being dropped.
# 17
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
Slightly longer, so you can open your tailgate with a cargo trailer attached. Trailers with a tongue jack that is forward are problematic for tailgates...
I’m pleased with the product and how prompt the delivery was. However the packaging was insufficient and the packaging was torn open all over. Scuffing of the finish is a result and of little consequence due to the intended use. It’s a stinger w/ball for motorhome. May I suggest better packaging in the future
# 18
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Slips right into the hitch and works perfectly!
Have not used and may not. May try returning and see how that works. After installing the DrawTite hitch I see the 2" drop on this insert will be too low. Shame on me for not thinking this through prior to ordering.
# 19
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
Easy to install. I put it on the truck but haven’t utilized it as yet. Should be good.
# 20
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 7" Drop, 7-1/2" Rise - 10K - Black
Easy to install. I put it on the truck but haven’t utilized it as yet. Should be good.
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"