# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
just as described on their web site. Fits the trailer hitch and very satisfied. Only thing I would recommend being purchased with the trailer hitch is instead of the normal pin with carter pin. I would advise purchasing a key locking pin so that no one can steal your draw-tite ball mount and also steal the replacement mount you purchase that slides into the slot when towing anything, People have had there College Logos stolen because they did not have a key locking pin to avoid anyone just walking up undoing the carter pin, pulling the pin and walking away with those and the hitch cover. So if ETRAILER.COM sells the locking pin I would purchase it from them instead of the normal pin.
Product was fine and did what it was supposed to do.
# 2
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
from E-trailer...and once again I'm very satisfied! The package was delivered within a few days of ordering, all the contents were included, & the videos made for a flawless self-install (& I hate to admit it, but I'm not the most handy at things like that!). I have & will continue to refer friends & family to E-trailer for any future needs.
good value and quality. Came with 2" ball and pin.
# 3
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
It works very well
looks good and fits
# 4
Curt Class II Euro Style Drawbar with 2" Ball - 2-3/4" Rise - 3,500 lbs
Meets my needs to a tee, works excellent on 2011 Terrain.
It is heavy duty and well-built. I am not disappointed at all and I get comments everyone smile from people who are used to traveling overseas asking where I got the European style hitch from. The only downside is the lack of interchangeability in the size of the ball itself but I don’t think that’s a big deal because I set it up for what I need it for and keep a vehicle vehicle for longer periods of time.
# 5
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
It works very well
looks good and fits
# 6
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Very pleased with etrailer. Very easy to order from website. Fast delivery, easy to install ,perfect fit . Thanks. .
Ordered a complete hitch package for my GMC Terrain. Every piece was included and all of it was top notch quality. The fit was perfect and installation was a breeze. The wiring harness matched up perfectly with the OEM plugs, no splicing or crimping required. I highly recommend this company and its products.
# 7
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Videos extremely helpful.Product was all and even more than expected. The hitch went on without a HITCH, Sorry, couldn't help it. this is how it turned out. would buy again in a heart beat. Thanks
This high quality ball mount is perfect for my 2019 GMC Terrain. Thanks for the great products and wonderful service.
# 8
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 9
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
Items packed well delivered on time. Doesn't get much better that that.
Product arrived within three days and was the correct size I needed. Quality is good. All my hitches have had 4" bars but this one needs a 2" bar.
# 10
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 11
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
Items packed well delivered on time. Doesn't get much better that that.
Product arrived within three days and was the correct size I needed. Quality is good. All my hitches have had 4" bars but this one needs a 2" bar.
# 12
Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 10,000 lbs
Excellent service,order arrived quickly.
this is the second cushioned ball mount I have purchased. I haul a specialty trailer daily for work, stop & go, rough terrain first ball mount I used was just a cheap hollow one witch was turning the pin hole on the truck into an oval. Bought a cushioned ball mount and it lasted 4-6years of towing 3-5days/week before one of the pins holding the cushion in finally corroded in half. I'm sure the pin could have been replaced with some work to compress the rubber again but for the price and longevity of the product I just ordered new and keep on going.
# 13
MaxxTow Tri-Ball Mount for 2" Hitches - Hollow, Black Powder Coated Shank - Chrome Balls
Good quality part. Easy Install. Used for a year so far. No problems.
Great Hitch, reasonably priced
# 14
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
Items packed well delivered on time. Doesn't get much better that that.
Product arrived within three days and was the correct size I needed. Quality is good. All my hitches have had 4" bars but this one needs a 2" bar.
# 15
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
definitely solid as a rock
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
# 16
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K
Items packed well delivered on time. Doesn't get much better that that.
Product arrived within three days and was the correct size I needed. Quality is good. All my hitches have had 4" bars but this one needs a 2" bar.
# 17
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
There were some UPS delivery issues, damaged in shipment. But, etrailer.com jumped right on sending out another shipment after it was apparent that UPS would not complete the delivery. The installation took longer, maybe 1-1/2 hours, because I did not have all my tools ready and I was working on the concrete floor in the dark to outside with a portable shop light. Everything fit well and it looks great. The 2" drop ball mount was the perfect height for my 2019 Toyota Highlander Hybrid. I love the look of the Curt black insert that makes the hitch looks like it belongs on the car, nothing embarrassing at all. Anything negative? Maybe. The flat plate was a little difficult to hook onto with the UHaul safety chains on a 5x8 trailer. That's hardly a negative, though, and I wouldn't have spent more on another brand choice because of this. Happy happy!
Great fit and finish on this kit. So nice to be able to tow things with my Forester now. I thought I had an issue but figured out it was user error pretty quick, but only after I contacted etrailer for help. I heard back within 30 minutes of emailing and by that time I figured out my blunder. They were extremely helpful and responsive and were set on fixing the problem I thought I had. I have used etrailer for several different purchases over the past couple years and every time I have been thrilled with the service and the quality of product.
# 18
Curt Class II Euro Style Drawbar with 2" Ball - 2-5/8" Rise - 3,500 lbs
Meets my needs to a tee, works excellent on 2011 Terrain.
It isbthe right size and helps with the height difference to make the trailer more even with the back end of my Accord.
# 19
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
I pull a 20 ft. Travel trailer and had jackknifed backing up twice. The truck taillight creased the trailer. So I bought the extra long drawbar and have not had any problems since. Now I can also open the tailgate without hitting the tounge Jack.
# 20
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 6-3/4" Long - 3,500 lbs
It works very well
looks good and fits
What our customers are saying:
"Very easy process, good prices and my products were shipped on time and were delivered on time. The instructional videos online helped make installation easy!"