# 1
Stainless Steel Trailer Hitch Lock for 2-1/2" Receivers by Master Lock
This item has held up very well. It’s all my truck probably 300 days out of the year and all sorts of weather. The only thing that happened is the dust cover retainer has broken, but I still have cap and use it. It’s never been a problem to unlock or lock and it has never been an issue while using it to hold my hitch. The red colour has also faded somewhat from the sun over the air but it’s not horrible. I would definitely recommend this product and would absolutely buy another one.
Installed on 2012 Ford F-250 with the OEM 2.5" hitch. Nice fit, also really like the stainless steel construction since most of my towing is done in the winter towing a trailer full of snowmobiles on typical midwestern heavily salted roads. Nice rubber boot around lock with weather cap prevents salt/water intrusion and abrasion on hitch surfaces. Good looking anodized red handle/stop on other end. As mentioned earlier, weather seal o-ring on stem is slightly oversized and tends to push out rather than engaging hole in lock but a little lube on the o-ring before installation mitigated that issue. Service from etrailer is top notch - bar none.
# 2
Rapid Hitch Trailer Hitch Lock and Adjustment Pin Lock Set for 2" and 2-1/2" Hitches
I have used the hitch lock pin many times and with a couple different hitches to include the one for my 9,000lb travel trailer and have had no issues. I’ve only used the adjustment pin lock for some lighter trailers and it has worked as it should. No issues to report so far.
A bit tight on my X5 recover due to placement of the light connectors on my hitch but managable. Overall high quality and looks great
# 3
XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches - 3-1/2" Span
Super fast delivery, great instructional videos, excellent products! The anti rattle hitch pin in combination with the BW hitch is outstanding! Hitch works great with GMC multi pro tailgate.
Finally found a lock that will work on the new Toyota Sequoia hitch. You should add the Sequoia to your description, I know others have had issues finding on that works. Great service as always.
# 4
Trailer Hitch Receiver Lock - Padlock Style for Class III, IV and V Trailer Hitch Receiver
Very inexpensive, strong hitch lock! Will knock the competitors out of the park. I would highly recommend this for a strong pin to hold your hitch in. I have one locking in my hitch and another locking in my ball.
This hitch lock works flawlessly! The gray cover over the lock keeps out dirt and corrosion even in Maine winters where road salt is notorious for causing rust and corrosion. Tip: Occasionally squirt a little WD-40 into the lock cylinder and using the gray cover keeps it working like new!
# 5
Fastway Trailer Hitch Lock and Adjustment Pin Lock Set for Flash E Series Ball Mounts
Works just fine. Fits as it should for my application and the lock mechanism works well. The only issue I've had with them is the rubber caps fell off all the time and I eventually lost one. I'll probably need to lube it more often as a result of the missing dust covers. It also may be more prone to freezing up in the winter. Funny how a missing $.03 part can be a problem.
These worked great for my teardrop trailer "Lock & Roll" hitch. The smaller diameter pin locks the arms in place around the trailer side portion and the other locks the vehicle side into the receiver. The hitch originally came with just a pin and safety clip for the arms and even if the pin fell out the hitch would not disconnect due to it's design. Though this lock set is for an entirely different trailer hitch, it worked perfect for the Lock & Roll application. Was very happy to be able to find such a set-up. Thanks etrailer.
# 6
Curt Trailer Hitch Receiver Lock - 2" and 2-1/2" Hitches - Stainless Steel
Can’t speak for durability yet since I just received it but seems to be a quality product which I expect it to be. Fits perfect on a 2011 GMC 2500HD receiver hitch.
Overall I am very pleased with my ETrailer experience. Everything was pretty straightforward and my products came within a reasonable timeframe. My only suggestion to ETrailer is maybe to package the expensive products in a outer box. The product that I ordered was on the pricy side of things and I came home to see my expensive product sitting infront of my driveway, open to anyone driving past it. A criminal or an opportunistic person who understood the value of that product would definitely pose a concern. Other than that, this is a fabulous online store.
# 7
Draw-Tite Trailer Hitch Receiver Lock - 3" Hitches - Flush - 4" Span - Zinc Finish
This hitch fits the Ford 3" hitch perfectly. I have been using it constantly for the past year and it has held up well. Still functions and looks new.
It worked well for 1 year but at the 1.5 year mark it has rusted and the lock no longer works--it accepts the key but does not engage the locking mechanism. Thankfully I was able to get it off the hitch receiver. Will need to replace it.
# 8
Draw-Tite Trailer Hitch Lock w/ Pick-Proof Key - 3" Hitches - Flush - 4" Span - Zinc
The lock looks very heavy duty and well made. It is exactly what I was looking for to secure my hitch. Thank you Eric P at etrailer for your excellent customer service help on finding the perfect lock for my receiver.
The Locking Hitch Pin was not in the box. The box was pretty beat up but understandable as hitch is heavy. I didn’t notice any holes prior to opening so question if pin was simply missed in shipping? I would recommend taping the hitch pin to the hitch in this situation would have possibly saved locking pin from coming out of box if it was indeed was inside box at time of shipment.
# 9
Curt Lock Set for Adjustable Channel-Style Mounts
This locking pin is definitely long enough for the Curt 14,000 lb adjustable ball mount. In fact, its probably about a half an inch too long. The locking part flops around a bit, I wonder if it would come off with a good smack from a hammer. I'm going to try shoring it up with a few 5/8 inch washers.
The locks are big enough to fit both my hitch and ball hitch. 4 keys included makes it very convenient. Shipped very quickly.
# 10
Andersen Trailer Hitch Lock and Adjustment Pin Lock Set - EZ Hitch and EZ HD Ball Mounts - Stainless
Perfect! Fits the 2013 factory Tundra hitch PERFECTLY. Same key system, locks ball mount to sleeve, sleeve to receiver. I had been looking for this type of hitch/key lock for some time and was very happy with all the help E-Trailer and Jena provided in getting me one of their newest items of their inventory. I'll keeping back.
Works fine. Locks easily, but rubber cap doesn't stay on. Only used one camping season so far, so I don't know if lock internals will corrode over time without the protective cover. Considering thievery, probably worth it regardless. Probably worth
# 11
Tow Ready Base Rail Lock for 5th Wheel Trailer Hitches - 1/2" Diameter Pin
One lock used to lock 5th wheel hitch to industry standard rails. One lock used to lock Industry Standard Rails to pickup truck frame. Both locks worked perfectly. I now have THREE locks on my expensive 5th wheel hitch to really slow down any evil doers. They would be making a hell of a racket trying to get my hitch. Thanks. Great locks, fair price, super service, keyed alike. Thank so much!
The fifth wheel rail lock fits perfect. Also it arrived just as promised!
# 12
Blue Ox Trailer Hitch Receiver Lock - 5/8" Diameter
Fits up just fine. Using to secure my drop receiver to my truck. No issues.
The hitch pin itself appears to be a well-made, functional product. My problem is that I purchased it for my 2018 Chevy Duramax 2500HD. As those of us who own 2500HDs know, the hitch receiver is a 2.5" receiver rather than a 2", so that it can accommodate Class V hitch equipment. Most locking hitch pins are too short to work effectively which is why I purchased this one. Unfortunately, it appears that the way the tow-chain holes on Chevy's hitch are positioned, this pin blocks the use of the holes with the chain/hook makeup I've got. Will probably need to purchase shackles for the chains to make everything work correctly.
# 13
Trailer Hitch Receiver Lock for 2" Trailer Hitches - Stainless Steel
About 6 months after owning it, the lock is completely froze up. Can't cut the darn thing off without cutting my safety chain hook up off either
Would’ve been a great little lock had it actually fit in the housing. Too short for mine. Turns out my housing is 3”, not 2”. My bad. Paid $25 for it, etrailer wants $17 for return shipping fee? Pretty lame. So buyer beware, measure your housing first!
# 14
Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span
Clearance around the Tesla Model Y hitch receiver is tight but this anti-rattle hitch lock fit perfectly, even after torquing it to spec. The lock mechanism on the left comes very close to the 7-pin connector but it doesn’t touch and the lock rotates freely around the pin. Product appears to be of high quality.
I have ordered and used this device before. What is disgraceful is the respect shown toward products shipped from etrailer. While the two devices/parts I ordered probably could have through a war zone without any damage, the fact is IF they are beaten out of the box while in shipping is not right. Add some appropriate packing. Grade F on your packaging.
# 15
Roadmaster Hitch Lock for 2" Hitches - 4" Span - Qty 2
I have two curt channel hitches on two different trucks and it was hard to find a quality extra long hitch lock. These work perfect!
Shopping at etraileris always a pleasant experience. The representatives are always helpful and knowledgeable. The hitch locks work great. Thanks
# 16
Curt Base Rail Lock for 5th Wheel Trailer Hitches - 1/2" Diameter Pin
I used this on my super glide 5th wheel hitch. My truck didn’t have the puck system so I had to install rails for my hitch. There was not enough room to put the lock on the rear two holes so I put it on the front pin. Works just fine and easy to insert key when un-locking.
with the curt crossing 5th wheel hitch so light and easy to remove I decided that this is a must for security of my hitch.
# 17
Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks
A must have for the Swagman XTC-4 bike rack. Sure, I want to protect my bikes but I needed something that would protect my $200+ bike rack, too. You need a wrench to tighten the bolt, which does a good job of keeping the rack from rattling but is a pain because you always need to have a wrench around. But that's not the fault of the lock. The lock is pretty neat in that you can rotate the key hole so it's covered up to keep mud and weather out. I'd buy it again if needed and the price here at etrailer.com was good.
The product did not come with instructions. The videos at the manufacturer's site gave no instructions on installation. A video from a competitor explained how to install it. It can only be installed from the right side, that is the passenger side. A left-handed person, such as me, will naturally insert it from the left side. I did that repeatedly and of course it failed. Yes, I realize the world is right handed but a simple sentence saying it must be inserted from the right and not the left wouldn't take that much effort by the company. The same complaint applies to the bicycle rack itself.
# 18
Reese Pull Pin Lock Plates for 5th Wheel Trailer Hitches - Qty 4
These Reese pin locking plates are awesome. Before these I was using a cable to secure my 5th wheel hitch to the truck bed. Small point: two of the plates had a ding, one of which was sharp (image), but a few seconds with a file took care of that.
Great idea. Gives me piece of mind because I don’t always have the time or a place to store the 5th wheel when m not using it. Store all off plates when not in use on the pin and locked to keep it from getting lost.
# 19
Tow Ready Trailer Hitch Receiver Lock for 2-1/2" Hitches - Flush - 3-1/2" Span
As I have always said etrailer is the only go to for all my trailer parts…….everything I have ordered came on time and was exactly what I ordered
A year later, it still works great. A little shot of WD-40 is all it takes to keep this hitch lock going strong. Very happy with it.
# 20
Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches
Works exactly as described. Secures my Go Rhino bumper step, and keeps it from rattling. Only problem is I wish the bolt head was 3/4". Most socket sets don't go beyond 3/4", so you'll need a 7/8" box wrench or Cresent wrench to install/remove it.
Arrived quickly. Easy to install with the excellent video and instructions. I installed on my 2012 Forester with the Curt hitch I had previously purchased from etrailer. The locking hitch pin completely stopped my hitch rattle.
What our customers are saying:
"Fantastic customer service and very friendly person on the phone. Quick shipment for an item that wasnt even in stock. AAA+++ in my opinion!!!"