Best 2019 Chevrolet Silverado 3500 RV Door Parts

I'm happy I bought this unit. It fit my 1990 Fleetwood Jamboree perfectly. The original unit was literally falling apart and this new unit installed easily. I gave it four stars because I'm not impressed with the plastic ratchet post/slot assembly. It closed with a lot of pressure and remained tight, which is great. However, it's plastic. While it's great for now, I would have preferred screws, which will last the next decade or two. Having no confidence in the long term viability of plastic, I used caulking in the post/slots to "glue" them together, and installed both the interior and exterior sections with caulking, hoping the caulking does the long term job of keeping the unit in place, even after the plastic has become brittle. I'll update you in 10 years - hahaha. For now, I love the unit and would recommend it to anyone with my caveat about the plastic parts rather than screws.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I feel it would be a better product if it was screwed together rayher than clipped.

Best guess is I don't have a Lippert brand door so installation required modification to both door and handle. I was able to make it work

This was the exact same size as the handle I replaced. I have it 4 stars because the hole didn’t line up perfectly so I had to drill 2 new holes, which was easily done. I will order this again so I have a replacement down the road.

The door window frame fit the existing door opening quite well.

Be careful in purchasing this item! The bolt pattern maybe different than the one on your unit. VERY disappointed that etrailer DOES NOT know the bolt pattern or attempt to post it. Buyer be aware!!!

Bought it for use on our screen doors at home. Will work like a charm.

I didn’t like the play in the sliding bar width adjustment. Couldn’t they provide soft plastic ends along the sliding bar so when it was pushed on no HIVE. Or noise is heard or felt

As always etrailer does an excellent job of promptly getting your order to you and their packing is outstanding. They use double wall corrugated with staples on heavy loads, which does a much better job of preventing damage to the shipment. Great job! Thank you.

I replaced 4 of these to replace the plastic ones that had broke. These fit perfectly. They still look and work as good as the day I put them on. Thanks etrailer

The door window frame fit the existing door opening quite well.

Quality replacement. Same dimensions as OEM. You must replace both interior and exterior side as the screw pattern is different than OEM.

I just received this replacement slider panel. It was easy to install and seems flexible enough that it's not going to become brittle and break in the future. I enjoy buying from e-trailer. The items are well-packed, great customer communication and easy to work with. I recommend etrailer

Just what I ordered. Works like the original. Had to trim it a little to fit but easy with a pair of scissors.

Click to Enlarge

It leaves about an 1 1/2” gap at the bottom of the screen because the retractor needs to move that much to lock into place. It come with no mounting screws, and the instructions are somewhat vague. Also be aware that if you’re tailgate latch mechanism has an inside plate that pulls against the inside door frame the screen side channels will need to be moved a little over 1/4” back to allow clearance. I barely had enough room between the happyjac bed/couch lift framework and the doorframe for the latch pivot plate

Installation instructions are vague, had to Google for better directions. Still had to adjust instructions to fit it in. This screen wall does not reach all the way to the floor in our Toy Hauler, leaves a 1 1/2" gap at the floor.

It leaves about an 1 1/2” gap at the bottom of the screen because the retractor needs to move that much to lock into place. It come with no mounting screws, and the instructions are somewhat vague. Also be aware that if you’re tailgate latch mechanism has an inside plate that pulls against the inside door frame the screen side channels will need to be moved a little over 1/4” back to allow clearance. I barely had enough room between the happyjac bed/couch lift framework and the doorframe for the latch pivot plate

This is a classic example of a product designed manufactured and marketed by people that don’t use it themselves. The screen blows out of the track with slightest cross breeze or any other breeze. I threw your tracks away as they are useless. The only place these tracks would work is indoors at the RV Expo. The tracks I designed hold the screen in place. Now that I spent time rebuilding it it’s quite nice. Thank you for asking.

This was easy to install but definitely needs two people, one on either side of the door. The instructions did not say to use sealant but I used silicone under the frame. The frame snaps so no need to drill. The pull down shade works great for sun blackout. I replaced the original screwed in frame which had the 'fuzzy' window that you could not see through. This has a smoked clear glass, very nice.

We have put these in two of our campers now. They are a very easy install and we love that you can see out the window. Plus the mini blind is great for anytime you want to black out the window.

The window frame that I ended up ordering , was a White window frame , so black installation screws wouldn't work for me . On top of that , the window frame that I ordered , Didn't even need installation screws .

This window frame was an exact replacement for the frame that was already on our door. The tabs that held the window glass up on the bottom of the old frame had broken off. The glass slid down and created an open 1/2" gap at the top of the window. It was a perfect replacement fit. The only drawback was that the description should have stated that this replacement frame has 16 screws holes instead of 12 screw holes as on the old frame. I purchased new mounting screws but it was only a package of 12. I used 4 screws from the old frame but they shorter.

This was suposed to be a replacement for an LCI slam latch, however it did not fit in the same space as what it was replacing.

The locks were a perfect replacement for my original latches. I especially like a more unique lock than the traditional few RV dealers give you. In addition the key to the latches resembles the door key, but a different color. Very happy!

Click to Enlarge

Easy install and works perfect. I installed it upside down so I can lower it just a bit to more easily see who is at the door.

It's working just fine! I was a little put out that it didn't come as standard equipment on my trailer but that isn't Etrailer's fault. Etrailer carried what I needed and shipped within a good time frame so that I had it before our first trip last year with our new trailer. Oh, and I installed it myself while my hubby was working on something else. I will definitely order with Etrailer again.

This is a classic example of a product designed manufactured and marketed by people that don’t use it themselves. The screen blows out of the track with slightest cross breeze or any other breeze. I threw your tracks away as they are useless. The only place these tracks would work is indoors at the RV Expo. The tracks I designed hold the screen in place. Now that I spent time rebuilding it it’s quite nice. Thank you for asking.

Haven't had chance to use this yet. ordering and shipping were excellent and easy. Only problem and believe it was installer fault was getting gap pieces to stay in when closing door. need to make sure that it is tight to screen defender and upper bar, or plastic filler piece will fall out when closing door.

will not stay on door without taping it.

Installation was straight forward. However big however, the screen stops about an inch above the floor. I measured the rails out perfect and the screen header is touching my roof. Another problem is the screen is kind of loose i can live with that but the stopping above the floor with a big gap sucks.

I think we will LOVE our new screen, it is installed but we just haven't used the camper yet since installing it. Easy to install! Cant wait to sit in the back of the toy hauler and let the breeze blow in and the bugs stay out!

Easy install, appears to be good quality.

The screen was very easy to install, although it is easier with two people due to the size. Excellent quality. I added velcro straps to the top for added ease in securing the rolled screen for loading and unloading when the entrance needs to be fully open. The screen fit perfectly in our opening, but the adjustment panels are super easy to use.

Haven't had chance to use this yet. ordering and shipping were excellent and easy. Only problem and believe it was installer fault was getting gap pieces to stay in when closing door. need to make sure that it is tight to screen defender and upper bar, or plastic filler piece will fall out when closing door.

will not stay on door without taping it.

My old door hinges started to freeze up. These are almost identical to the previous ones and replaced them just fine. NOTE: You only need one of the hinges on your door for motion control and use the regular non-motion hinges for the other two. Door is much smoother as a result.

Had to fuss a bit with screw holes nuts worked well so far. Great service!

After ordering from several places and getting the wrong latch finally found the right one and it work great..!!

cheap China product. original was three pieces but replacement Was 2 pieces. this prevented installation thru handle hole. junk do not waste time and money