# 1
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
All the hardware fit and easy to follow instructions. Hitch is installed. Just need to put it to use now.
What can I say amazing service I ordered a ball mount on the evening of the 26th and it was waiting for me at my house on the 27th. Used information on etrailer website to figure out what size and length I needed and got a perfect fit. Well done etrailer and they kept me informed by email before and after delivery. TOP NOTCH
# 2
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
EZ installation, plan on towing my 1932 plymouth coupe to car shows around the state.
Clean finish look and easy to install. If you order one read closely. It comes with a pin for it already. No meed to order one separately.
# 3
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
All as advertised. Quick delivery. Good quality.
About as solid as it gets. The tote bag is a nice addition.
# 4
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Fits and works great
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 5
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
I pull a 20 ft. Travel trailer and had jackknifed backing up twice. The truck taillight creased the trailer. So I bought the extra long drawbar and have not had any problems since. Now I can also open the tailgate without hitting the tounge Jack.
# 6
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Should work great! Had to extend the hitch since the bike rack hit the bumper on the Traverse.
The receiver is exactly what I was looking for. Put it on a 2016 chevy traverse and it is the right length for pulling a trailer. Looked at 6 1/2 inch, too short. Quality is good also. I give it 4 stars.
# 7
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Good product. Performs as described.
All the hardware fit and easy to follow instructions. Hitch is installed. Just need to put it to use now.
# 8
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Great product, but did not fit on my 2014 Traverse. The top receiver would rub on my fiberglass bumper of the Traverse and therefore only half the pin hole would line up with the receiver. Plus my 4 bike rack would not fit between car and pop up camper then.
Didn't take my husband long to install it on my vehicle. The only thing is that NO PIN comes with it so be sure to add one to your shopping cart as well. Heavy duty and everything worked as it should. Shipping was quick and notifications were received. The company followed up to make sure everything was good. This is what online, custom shopping experiences should be like.
# 9
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
Gone are the days I need to carry three different hitches with different sized balls on them. Gone are the days when I, or others, walked around the back of my truck and cracked their shin on a protruding trailer hitch. I keep this folded up in front of the drop where it's not going to catch anyone by surprise. When I'm ready to use it, I simply pull two pins out which allows it to drop free and rotate out. I choose the height I need and install the two pins/clips. To rotate the balls, again simply pull the third pin and rotate to desired size. It was more than I wanted to spend at the time but since I'm glad I spent the money.
Super convenient and well worth the money. All 3 of my trailers have a different ball size, and this is a breeze compared to constantly swapping tow hitches. Keep the pins well lubricated, and they slide well maintain their appearance.
# 10
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
definitely solid as a rock
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
# 11
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
The ball mount was a complete failure even after a lengthy discussion on the phone. I wanted a ball mount that would accept the rocker ball and anti-sway bar. The bar sent to me can't be used this way. An email and phone message to the sales person I ordered with, got no response.
# 12
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Drop - 7,500 lbs
Excellent construction. Heavy and solid, as it should be. Welded ball means no concerns of proper torque on a nut.
Purchased for a 2006 Jeep liberty. the only issue I have is that it connects right below the spare tire, making trailer attachment more difficult that it should be. If I had gotten a slightly longer hitch, wouldn't have been an issue. It's not a deal breaker, and the hitch itself has works perfectly.
# 13
Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise - 10,000 lbs
This hitch is amazing!!! Be prepared though it is very heavy! I love how easy it is to adjust to different heights and ball sizes with the 2 common sizes provided. The scale on the back can be helpful to let you know if you have the proper trailer weight. The more you use it the more you will like it!
Love the height adjustment for all 3 of my trailers suuper solid, I get compliments all the time when people see it "wow that things stout!" Keeps the trailer tongue from excessive bobbing, the pins it came with are a huge improvement from the standard Bobby pin style I was used to. Over all I do not regret a dollar spent and would highly recommend to anyone looking for an initial purchase or upgrade their tow life
# 14
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
All the hardware fit and easy to follow instructions. Hitch is installed. Just need to put it to use now.
What can I say amazing service I ordered a ball mount on the evening of the 26th and it was waiting for me at my house on the 27th. Used information on etrailer website to figure out what size and length I needed and got a perfect fit. Well done etrailer and they kept me informed by email before and after delivery. TOP NOTCH
# 15
Curt Class III Drawbar - 2" Rise - 4" Drop - 13" Long - 7,500 lbs
It works!
Haven't used it yet. I bought it because of CURT's quality. It was beat up in shipping though.
# 16
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks
# 17
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 4" Drop - 7,500 lbs
Excellent construction. Heavy and solid, as it should be. Welded ball means no concerns of proper torque on a nut.
All of the products I've have bought for my trailer project from etrailer have been great. My go-to place for anything trailer related!
# 18
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
# 19
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black
I purchased the B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black and am extremely happy with it. It was $100 cheaper than anywhere else I shopped. Was delivered quickly and was an easy install. I used it to haul a trailer full of wood that I cut up and it got the job done! It is very heavy duty and takes the place of multiple single hitches. It’s nice to have all the options in one.
I like that it stows under the truck and i'm not banging my leg and getting grease on myself. The only draw back was i wanted to use my anti slap bracket and it would not fit due to the insert butts up to the hitch receiver. I'm not experiencing any slapping when taking off or stopping at this time.I use this for my boat and a utility trailer and i don't have to change hitch insert which is really nice, one less thing to do.
# 20
Ball Mount Adjustable with Sway-Control Tab, 6,000 lbs
I have not used yet.
The ball mount did not fit onto the shank. This was a very disappointing experience.
What our customers are saying:
"In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!"