# 1
B&W Extend-A-Goose Gooseneck Coupler - 2-5/16" Ball - 10" Offset - 24,000 lbs
Great produce and I like the coupler shape helps slide on the ball and I can put a lock on it. Installed on my livestock trailer to add clearance for my GMC 1500 short bed that I had installed B&W gooseneck turnover ball hitch and it worked Great. Know I have GMC Sierra 3500 HD 6.5 bed with B&W -BWGNXA2061 and it still works great on this truck so I left it on the trailer. It was a very easy one person install a little heavy but manageable. My trailer has the two bolt style mount.
Bought a 35' gooseneck trailer with a granny attic but when I went to hook up my short bed Dually, I couldn't make a turn without hitting the cab of truck. I saw this offset online, took some measurements and this offset was going to allow me to make the long road trip without issue. Thank you etrailer, I got the trailer to west Texas in its new home.
# 2
Square Tube Gooseneck Coupler, Inner Tube Only - 25K
Excellent quality
ups delivered the Bulldog gooseneck inner coupler today to replace the worn out coupler on the flatbed trailer. Within a short time the coupler was installed. It fit perfectly. Etrailer has great customer service. Our friends at Ups delivered the coupler quickly. Larryi
# 3
Ram Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - Round - 2-5/16" Ball - 25K
Receive my product replacement gooseneck lockdown system built heavy duty simple to install and the locking system is monster us I think it will very much suit my needs easy to unlock and lock I would definitely be proud to endorse a product like this and you can’t beat the price everyone I looked at that was like this [was almost double the price] or better shipping was great and quick thank you
# 4
Ram Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - Square - 2-5/16" Ball - 25K
Some of the welds looked a little rough and there was quite a bit of spatter on the tube, but with that said, there's no way you'll find a better value for the money. Since I had to weld the hitch on anyways, I cleaned the spatter off with a flap wheel and went over the welds I wasn't happy with. I wouldn't hesitate to purchase another one.
# 5
Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler - Round - 30,000 lbs
OK. Just installed the convert- A - Ball Multi -Cushioned Coupler this morrin. Took about 15 min. Took it for a test drive down the I10 just a mile from my front door. [ Casa Grande AZ.] It reduced the felt bumps and road jars by about 80%. I drove down the access road for a few miles. [ uneven, repaired spots, really ruff road.] Then got on the I 10 and drove between The Pinal exit and the McCartney exit. # lane just repaved about a year ago. Did not feel any road vibration that you get at 70 MPH. Other coulper go for 2 to 3 times this much. And require a lot of up keep. I would recommend this to anyone hauling horses,or any big trailer that whats a smoother ride.
Got stuck several times. Would not release. I finally had to cut it off. Cheap locking mechanism.
# 6
Ram Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - Round - 2-5/16" Ball - 30K
I have not installed it yet but it appears to be well made but a little cleaning of the weld would have been appreciated
# 7
Bulldog Gooseneck Coupler - Adjustable - Round - 2-5/16" Ball - 30,000 lbs
Replacement on our hay trailer was the call for the hitch. It was easy to weld on and I like the pin on this hitch. It never moves like ones that are just jam nut tight. Can run down the road and not worry that this hitch will move out of ajustment. Fast shipping and a great company to work with.
Product is exactly what I needed for my 30 ft cattle trailer. Heavy duty material that will last longer than the trailer. Would definetly recommend this product to others.
# 8
Bulldog Gooseneck Coupler Base Assembly - Adjustable - Round - 2-5/16" Ball - 20,000 lbs
The bulldog goose neck coupler fits the hitch on the front of my travel trailer as advertised. However the pin that secures it is an inch short. The supplied pin is 5” and it needs to be 6”. I sent a picture and description of the problem to Carol C. A week ago and followed up with a phone call a few hours later and was told by the girl that answered the phone that she needed to get with bulldog. To date I have herd nothing from anyone. I would not consider this to be good service after the sale and would not recommend Etrailer as a product supplier.
# 9
B&W Defender Locking Gooseneck Coupler - Adjustable - Round - 2-5/16" Ball - 25,000 lbs
I have used etrailer a few times and am 100% satisfied with products and service. I had the pleasure of dealing with customer service on this order as part of my order was backorder. Communication was awesome throughout the process. Great to do business with.
They did not have the one I needed, but were quick to have an alternative. Great communication, will continue ordering.
# 10
B&W Defender Locking Gooseneck Coupler Inner Tube - Round - 2-5/16" Ball - 25,000 lbs
They did not have the one I needed, but were quick to have an alternative. Great communication, will continue ordering.
Easy to order and was delivered very quickly!
# 11
2-5/16" Gooseneck Coupler Head with 1/2" Lock Pin, 30,000 lbs.
Very good product so far. Easy to weld and connect to the ball. The inside is a bit rough from the casting. Not sure how that is a negative or positive to hold grease.Pulled across the scale with @41k trailer. I reduced load after that but the coupler held, or should I say my welds.
# 12
Ram Gooseneck Coupler - Topwind - 7" Adjustment - Square - 2-5/16" Ball - 30K
The weld quality on this gooseneck coupler is horrible! Our fab shop will have to repair almost every weld on the coupler. For something that is supposed to be rated for 30K pounds I'd expect a certified welder to weld the coupler. But this is not the case because the undercut and lack of fusion on this coupler would not be present if a certified welder welded this coupler. Also, it came as bare metal not painted as shown in the picture. We are NOT satisfied at all with this product!
# 13
Bulldog BX1 Gooseneck Coupler - Adjustable Height - Square - 3" Ball - 40,000 lbs
Arrived quickly - ordered Fri received Wed All purchases we have made from etrailer in the last two years have been quick and in good condition. Thank you
Honestly i feel short changed the welds should really be 100% across regardless of whether necessary or not. Some oil so it didnt rust during shipping would of also been appreciated but again not end of the world. The welds appear to be robotic if they're by hand they did an awesome job.of what was done but again, for the time to finish the seams wouldnt of been a real big deal on the production side, but i sure do appreciate the capacity its rated and i plan on using it to its fullest. Thanks again
# 14
Gen-Y Spartan Shock Absorbing Gooseneck Coupler - 5" Offset 2-5/16" Recessed Ball 3.5K TW
With my trailer which is only a 6 k trailer I bought the 7.5k hitch yet empty it is maxed out wish there was a way to adjust
This seems to be an excellent upgrade to the coupler on my Belmont trailer. Less than 100 miles on it so far but the trailer seems to jerk the truck around less on these fine Pennsylvania roads. It is helpful to have an extra pair of hands when installing. The powder coating made the tube on the coupler a little thicker than the original. I used a wire brush and some spray lithium grease on the inside of the trailer tube and was able to install the new coupler just by working it back and forth with minimal powder coating coming off. My trailer is registered at 9,999 lbs which is why I went with the 3.5k TW option. Haven’t had an opportunity to put a machine on the trailer yet to see if that was wise or not but a load of 18 - 6”x6”x12’ pressure treated beams barely moved the indicator. After my first trip I opted to change it to using the hole closest to the coupler as the trailer had a little too much angle back towards the last axle. Even in the bottom hole I still have 9” of clearance between the top of my tailgate on my Ram 2500 and the trailer.
# 15
Bulldog Gooseneck Coupler - Adjustable - Square - 2-5/16" Ball - 25,000 lbs
Great product! Exactly what was on my pj dump trailer.
Good guality parts and exelant customer service from eTrailer staff. Itam was on back order from bully dog and etrailer staff did a great job of keeping me updated on my order.
# 16
Gen-Y Spartan Shock Absorbing Gooseneck Coupler - 5" Offset - 2-5/16" Ball - 3.5K TW
This seems to be an excellent upgrade to the coupler on my Belmont trailer. Less than 100 miles on it so far but the trailer seems to jerk the truck around less on these fine Pennsylvania roads. It is helpful to have an extra pair of hands when installing. The powder coating made the tube on the coupler a little thicker than the original. I used a wire brush and some spray lithium grease on the inside of the trailer tube and was able to install the new coupler just by working it back and forth with minimal powder coating coming off. My trailer is registered at 9,999 lbs which is why I went with the 3.5k TW option. Haven’t had an opportunity to put a machine on the trailer yet to see if that was wise or not but a load of 18 - 6”x6”x12’ pressure treated beams barely moved the indicator. After my first trip I opted to change it to using the hole closest to the coupler as the trailer had a little too much angle back towards the last axle. Even in the bottom hole I still have 9” of clearance between the top of my tailgate on my Ram 2500 and the trailer.
The difference is substantial! I won’t say you can’t tell the trailer is back there but the ride comfort is outstanding!!!!
# 17
Gen-Y Spartan Shock Absorbing Gooseneck Coupler - 5" Offset - 2-5/16" Ball - 5.5K TW
I don't see how I lived without this. We often experienced a "bucking" when crossing bridges or even on certain roads with expansion joints. We were getting bounced around so much I can't imagine how our horses survived. This product has removed that completely. It also provides a slight offset if you have a shortbed. I have an 8' bed, but welcome the extra space between my tailgate and the trailer. Well worth the money! I will never tow a gooseneck trailer again without this.
# 18
Gen-Y Spartan Shock Absorbing Gooseneck Coupler - 5" Offset - 2-5/16" Ball - 5.5K TW
This seems to be an excellent upgrade to the coupler on my Belmont trailer. Less than 100 miles on it so far but the trailer seems to jerk the truck around less on these fine Pennsylvania roads. It is helpful to have an extra pair of hands when installing. The powder coating made the tube on the coupler a little thicker than the original. I used a wire brush and some spray lithium grease on the inside of the trailer tube and was able to install the new coupler just by working it back and forth with minimal powder coating coming off. My trailer is registered at 9,999 lbs which is why I went with the 3.5k TW option. Haven’t had an opportunity to put a machine on the trailer yet to see if that was wise or not but a load of 18 - 6”x6”x12’ pressure treated beams barely moved the indicator. After my first trip I opted to change it to using the hole closest to the coupler as the trailer had a little too much angle back towards the last axle. Even in the bottom hole I still have 9” of clearance between the top of my tailgate on my Ram 2500 and the trailer.
I don't see how I lived without this. We often experienced a "bucking" when crossing bridges or even on certain roads with expansion joints. We were getting bounced around so much I can't imagine how our horses survived. This product has removed that completely. It also provides a slight offset if you have a shortbed. I have an 8' bed, but welcome the extra space between my tailgate and the trailer. Well worth the money! I will never tow a gooseneck trailer again without this.
# 19
Bulldog Gooseneck Coupler - Fixed Base - Round - 2-5/16" Ball - 20,000 lbs
Excellent quality
Not the right size. Need help to return an get the correct size. After waiting 7 months.
# 20
Round Gooseneck Coupler with 28" - 38" Adjustable Height - 24,000 lbs
direct replacement for the old damaged coupler. works great!
What our customers are saying:
"Thanks for my order super fast shipping quality excellent. will order again. thanks again. A+A+A+ to deal with."