# 1
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
DON'T KNOW IF I WILL NEED THEM BUT I HAVE IT JUST IN CASE AND THE BAG CAME A FEW DAYS LATER. LOOKS LIKE THEY WILL WORK WELL
Installation was relatively easy. The hardware includes 6 fish wires that screw onto the threads of the bolts. Thought I might have to go buy them somewhere. And pulling bolt through the chassis was easier than I thought. The hardest part to the installation was reinstalling the muffler. The hitch is nearly flush with the edge of the bumper so you don't have to get a long insert. Some I saw online seem to be under the car and would require a longer insert. Bought the hitch with ball mounts and wiring harness. For DIYer its a piece of cake.
# 2
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
No complaints about this draw bar. Powder coat was nice and shiny. Holes were in the right place, and welds were solid.
Etrailer shipped my order the same day and the receiver is very well made and fit perfect.
# 3
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
GLORIOUS!!! Bought this item with zero experience, but much research. It is the best vehicle-related purchase I have ever made! Item performs exactly as advertised, even in spite of much abuse I have given it. Just because I could, I load tested it right at the edge of the max distributed towing weight, multiple times. No problems ever! Easy to install properly and safely!!! Well made construction! In my opinion, the best on the market at any price, but fortunately not the highest price by a pleasant margin!!!
# 4
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Very nice heavy duty with powder coated black paint.....I’ve always been told, “ Bigger is better.” This should take care of any weight limits I’ll be using....delivery was on time..... Thanks Etrailer, you guys are the best....
No complaints about this draw bar. Powder coat was nice and shiny. Holes were in the right place, and welds were solid.
# 5
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Received my item very quickly, was packaged nicely. Would definitely recommend etrailer.com and purchase from them again.
Items packed well delivered on time. Doesn't get much better that that.
# 6
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
# 7
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
I have traveled across the US towing an overloaded Uhaul 12' trailer. The trailer was still behind me when I arrived, so the hitch functioned as promised. I did not, however, require the extra long hitch as suggested for my particular vehicle, but it will serve as an extra. Unnecessary purchase. My son has since purchased a hitch from etrailer for his new Ford Edge. We're both happy - very robust and well engineered product(s)
Very usable for my purpose, just I wanted..
# 8
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 9
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
# 10
Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount - 7" Rise to 9-1/2" Drop - 5,000 lbs
A year has passed with my Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount and I have nothing but praise for this mount. Once you find the correct height to have a perfectly level trailer there's no need to adjust. The beauty lies in the cushioning! Towing a Yamaha AR190 (3200lb boat and trailer combo) is silent. Even over the bumpiest pavement the tow is smooth. There is no harsh slamming when braking or taking off from the boat ramp. I don't know why everyone isn't running one of these, I wouldn't run any other hitch mount PERIOD! If you're on the fence, get off and buy one, you will NOT regret it!
Substantially reduced the bump & sway I was experiencing after adding a hinged gate on my trailer. The added weight on the rear wreaked havoc on my trailer handling when empty. Not helping matters was the 3" lift I'd previously installed on my truck, even though I currently had a 10" adjustable drop hitch already. Combination of the lift and extra weight on the back of the trailer tipped it over the edge.
# 11
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 12
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
DON'T KNOW IF I WILL NEED THEM BUT I HAVE IT JUST IN CASE AND THE BAG CAME A FEW DAYS LATER. LOOKS LIKE THEY WILL WORK WELL
Installation was relatively easy. The hardware includes 6 fish wires that screw onto the threads of the bolts. Thought I might have to go buy them somewhere. And pulling bolt through the chassis was easier than I thought. The hardest part to the installation was reinstalling the muffler. The hitch is nearly flush with the edge of the bumper so you don't have to get a long insert. Some I saw online seem to be under the car and would require a longer insert. Bought the hitch with ball mounts and wiring harness. For DIYer its a piece of cake.
# 13
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Very happy with the fit and finish of the product. What I like most is the extra extension it allows for with out derating. My problem centered on tailgate clearence when in the open position. Tailgate would contact the edge of the tounge jack. This solved that problem plus now I don't need to carry seperate ball mounts for my boat or enclosed trailer
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
# 14
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 15
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
I have traveled across the US towing an overloaded Uhaul 12' trailer. The trailer was still behind me when I arrived, so the hitch functioned as promised. I did not, however, require the extra long hitch as suggested for my particular vehicle, but it will serve as an extra. Unnecessary purchase. My son has since purchased a hitch from etrailer for his new Ford Edge. We're both happy - very robust and well engineered product(s)
Very usable for my purpose, just I wanted..
# 16
Pro Series Tri-Ball Mount for 2" Hitches - 1-7/8", 2", 2-5/16" Balls - Black
Not only did I get the parts I needed at a great price. They were delivered they day after I ordered them. Great communication from my salesman. I will definitely be a return customer.
Heavy duty hitch. Well built and welds are fine.
# 17
Curt Ball Mount - 6" Rise, 8" Drop - 11-1/2" Long - 5,000 lbs
GLORIOUS!!! Bought this item with zero experience, but much research. It is the best vehicle-related purchase I have ever made! Item performs exactly as advertised, even in spite of much abuse I have given it. Just because I could, I load tested it right at the edge of the max distributed towing weight, multiple times. No problems ever! Easy to install properly and safely!!! Well made construction! In my opinion, the best on the market at any price, but fortunately not the highest price by a pleasant margin!!!
# 18
Draw-Tite Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 10-1/4" Long - 16K
Its been a year and I aint broke it yet. I use this hitch to tow my 7Klb trailer. The trailer is tongue heavy and I needed something rugged to tow it with. Haven't had any troubles with this hitch.
This ball mount fit the SUV just right. I needed a 5 inch rise and the mount angled away from the bumper. However, the load capacity was way more than I needed, but the fit made up for that. It's a little loose in the receiver so I will be adding a stabalizer to lock it in place.
# 19
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
GLORIOUS!!! Bought this item with zero experience, but much research. It is the best vehicle-related purchase I have ever made! Item performs exactly as advertised, even in spite of much abuse I have given it. Just because I could, I load tested it right at the edge of the max distributed towing weight, multiple times. No problems ever! Easy to install properly and safely!!! Well made construction! In my opinion, the best on the market at any price, but fortunately not the highest price by a pleasant margin!!!
# 20
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
I have used this hitch for about a year now. I have an 18' dovetail trailer that i mainly use this hitch for. This trailer has very little clearance at the lower edge of the dovetail. This hitch allows me to adjust this with the many different height adjustments provided by multiple holes. I also really like the way you can store the ball portion away from unknowing chin bones. Only word of caution I have is when you pull the pins to adjust/use the hitch, be ready for the ball portion to drop fast! It has some weight to it and can pinch/smash fingers. Ask me how I know. Overall great hitch.
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"