Best 2016 Chevrolet Silverado 3500 Backup Cameras

Worked great to line up my hitch ball and trailer coupler when I was ready to leave camp. Just have to remember to remove it from tailgate before pulling out.

Click to Enlarge

Whenever I have needed anything from etrailer they are always there to help with a product exspecially Amy E. I have talked to her in the past on her recommendation and she has never steered me wrong. She not only helped me with the mirrors and camera but with a new Kurt 5th wheel hitch that I purchased and installed myself. A huge shoot out to Amy and etrailer.

The camera worked perfectly the first time. I used it but two days later, nothing. The battery was dead. Next time, same thing. I made sure it was powered off and I even removed battery. Reinstalled battery, powered on and only got still shot of myself. Placed it on tailgate and nothing at all. By the instructions I have done everything correctly. Not working for me at all.

Other than a factory install this is the best option for a cargo camera. The only hitch was that the magnetic mount does not stick to the new Ford aluminum bodies. I mounted a steel plate to the bed cover and once it is folded up place the camera on it. I have a 5th wheel hitch and it is in a perfect position for hitching the trailer.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I often have to hitch my 30 foot gooseneck trailer alone and the Swift Hitch is an awesome tool. It's quick and easy to do a once aggravating chore.

The signal from the camera drops off when the receiver is more than 3-5 feet from the camera. Will be returning it.

Have 07 dodge 3500.sockets not the same on receiver.No problem just tapped in to green/white wire for reverse lights[power] with red and black wire for ground. fyi just cut off the supplied plug and leave the red and black wires to tap to original wiring,simple.electric tape and done.Took very easy 2 hours install.works like it should.get some long zip ties too,make it look right.

First back up camera I ever purchased. Installed on a 1997 Dodge 3500 extend cab truck. Cable is just long enough to mount camera on left side of dash. Love the hitch mode once you get use to it you will want one on every vehicle.

I installed this in an F150 and 19ft trailer combination. The install went reasonably easily, after I had worked out how to route the wiring. In general the item works ok but my main issue is how difficult it is to navigate the software that controls the image. It appears that the brightness setting is set too low out of the box, so in bright conditions (when the sun is out), it is not easy to see what is on the screen. Trying to adjust brightness has been almost impossible. The remote is not always making a connection with the unit and there appears to be no way to make adjustments without the remote. Do you have contact info for the manufacturer, or perhaps you've had previous feedback about this? Thanks.

I installed a backup camera on my 40' 5th wheel travel trailer. LOVE it! Dialed in the guidelines, flipped the image to mirror view and can nail the tight parking spaces like a professional. Lets me keep an eye on the bikes on the bike rack too. The night vision feature is great. The microphone/speaker works well when I need a real person spotting (which is almost never now). Now my wife can just talk to me, no more yelling. Installation wasn't too difficult as the cable fit behind the weather strip along the corners of the coach. If you want to know what's in the blind spot behind you, good choice here. And the monitor has 2 more video connections to use too. Might add a hookup camera next. Anyway, buy it.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This was a pretty good back up camera. The magnetic base was helpful in keeping it in place. The screen was fairly clear but occasionally had some interference which caused lines across the screen. Sadly it was stolen recently.

The product works great but Im a trucker and when I bought it it was to put behind my trailer to see when backing up, but on the product description it said it can be 100's of feet and still have a signal but that is not the case.

Didn't work as promised, led light always came on annoying people following, Suburban towing 24' trailer didn't work. Tried contacting Hoppkins no reply. I would not recommend, as a rear view camera ok just remember to turn off led lights as if your actually using it you will as when there on it is almost unusable.

Camera resolution is very good, but antenna is too short to broadcast through my 21' camper to my iPhone 14 Pro Max . . . I had to purchase a wired game antenna mounted on front of air conditioner to get reliable Wi-Fi signal (most of the time). Installation was fairly easy.

I am very happy with it.

Image only covers 1/2 the mirror & is too small to see any details

Hard to see in bright sun other than that easy to install

This was fairly easy to install. Works great for lining up on our fifth wheel trailer hitch.

Was easy to install and the quality of the picture was rather surprising. Very clear and bright. Definitely recommend for anyone wanting to ease the hookup for a Fifth Wheel with a goose neck adapter.

Every thing in the kit look like good stuff haven't installed yet.

There was a missing clip necessary to activate the brake lights.

The installed led light harness almost fits the brake light housing. I had to make a few modifications to make it fit. Other than that it works perfectly.

Exactly what I needed for our venerable 2003 Jayco travel trailer. 3D printed a very neat unit that holds the display and fits into a “sunglasses pocket” on the top of the dashboard of our Chevy Colorado pickup.

Great system, installed this for one of my customers

The camera is of high quality, as is the rearview mirror and monitor. I did have to return the first mirror because the bracket didn't match my 2013 Ram 1500's windshield mount, even though it was listed as a universal fit. The Ram has a triangular type fitting. I tapped into the reverse light wiring for power. l ended up having to replace the incandescent reverse light bulbs with LED bulbs because the monitor image flickered badly until I installed the LEDs. I think this was because the BCM (Body Control Module) got confused with the additional power draw. Since then the camera and monitor have worked flawlessly. It provides a great view behind the truck, even at night. Because of the placement on the bumper it doesn't have a good view of the hitch ball, but I don't tow very often. Overall I have been very pleased and feel that the camera is well worth the price.

Click to Enlarge

Outstanding parts knowledge and a high quality products!

Reception range is better than stated. We have an extended cab F350, pulling a 3-horse, slant-load gooseneck. We did not need to use the coax cable for the rear camera, the signal / reception at the monitor in the cab was just fine from the camera's antenna. Connection times between the display and the cameras are reasonable. The display is a bit dim in daylight but viewing from the cab is ok. Battery life appears to be good. Initial setup was quite simple, really nothing had to be done except turn on the cammeras and the monitor, and everything linked up automatically. All in all, a good system.

The first unit I received was defective (screen was too dark to be useful) but was replaced without any problems by etrailer. Great and helpful customer service, impressive!

The quality of the parts seem good but the directions to install everything were horrible (essentially none existent) and I had to go to [online] to figure out how to remove my factory mirror for the new mirror install and the wiring I figured out by trial and error. The camera kit should have included longer screws to replace the stock screws on the F250 brake light. The order was delayed about a month due to supply chain shortages. Once I got got it all together it works well, just disappointed in the instructions and should have provided replacement screws.

The directions are poor at best. You have to figure it out on your own, which isn't a real big problem, but some additional information would be nice. The bezel for the camera is nice, but doesn't fit 100%. Its close enough, but you have to play with it a little. Additionally, I'm not sure why the camera has a 6' cable, then there is a REQUIRED 24' cable to then connect to another 6' cable to the mirror. I'm wanting to install the mirror in my truck, not the truck in front of me. I don't need 36' of cable, its a Crew Cab, not a buss. So it means you have ALOT of cable to stash. Also, other than changing the brightness, I have no idea what the POWER button on the mirror does. I wired to a switched power source figuring I could just press the power button to turn the monitor on and off. Guess what.. you can't. It is ON. To have this work right, you'd have to figure out a way to wire it to the reverse light switch. And once you find this issue (despite the item description clearly stating the power button can be used to turn it on and off), good luck getting help from etrailer. Was told I would be contacted by someone from technical support days ago... its been crickets. It also sucks the mirror is autodiming, despite what looks like light sensors front and rear, it does not dim (only found that mentioned in the two page "manual/install guide".