# 1
Swagman Truck Bed Bike Rack for 2 Bikes - Fork Mount - 9-mm Skewer
Used this bike rack for the first time this past weekend and it worked perfectly. I drove down a fairly bumpy dirt road and it held true to the truck bed and held the bikes steady. etrailer had a great price and shipped it quickly. I would highly recommend it rather than spending more than twice as much for a similar rack. I didn't expect to find a bike rack like this for this price. Assembly, installation and operation are all very easy.
Work really good. Easy install, reliable. However I would not recommend this product due to part(s) availablity. I needed to replace the lock, keys stolen out of truck, and they were not available to order.
# 2
Thule Hitching Post Pro Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches
built solid, easy to install .just received bike rack have not used yet.
Super easy to order. Arrived in a few days. Installed in 10 minutes. Appreciate the email updates.
# 3
Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount
We are happy with our Swagman XC 2-Bike Rack; it has performed above average on highways and dirt roads and is a breeze to attach to our truck, thank you for a great product.
I like the overall design of this rack, but unfortunately after hauling a couple bikes around for a while the point where the crossbar connects has apparently rounded off so the rack swings back and forth. I've used rope to tie the ends of the rack to the car to stop this from getting worse, but it's inconvenient. Note: the hitch connection itself is good and solid, but the point where the crossbar connects to the bar coming from the hitch has gotten loose and there's no way that I can see to tighten it.
# 4
Softride Shuttle Pad Tailgate Pad for Full-Size Trucks - Up to 6 Bikes - 61" Wide
Fit great. can wait to tested in my next trip. came little late, but hope will work for us.
The fit for a 2014 Ram was spot on, no issue with the wide style tailgate top and the access flap for the tailgate handle lined up perfectly. Material is durable and easy to clean, the only thing holding it from a 5 stars is if it had the padded dividers on top to keep the bikes separated. But for the price, the fit and finish was exceptional, great value !!!
# 5
Inno Velo Gripper Bike Rack for Truck Beds - Clamp On
Using the Grippers for carrying 2 ebikes, weighing 55 & 75 lbs. I know this is above the rated bike weights but so far they have performed well. My short bed keeps the 75# bike pretty well locked in front to back so that may help.
# 6
Hollywood Racks Truck Bed Bike Carrier - Fork Mount - Bolt On
These racks were just as advertised. I mounted them on a 2x4 and then clamped that into the front of my bed. They worked great. The thing about these racks is that they are so versatile. They could be used in any number of ways. You just have to give it some thought. And whatever you come up with, you haven't spent a fortune either.
The Hollywood Racks Truck Bed Bike Carrier - Fork Mount - Bolt On, is just what I was looking for to be able to build a bike rack for carrying one of my bikes on my motorcycle. It was easy to mount and it holds my bike in place while riding on bumpy dirt roads, city streets, highways and even when I hit some twisty country roads. It's really easy to load and unload my bike when I get to where I want to ride. I use a velcro strap around the quick-release and the fork arm as an added safety as well as a couple tie-downs from my bike handlebars to my motorcycle passenger pegs to help distribute the weight on my rack. If you want to build your own DIY bike rack I totally recommend the Hollywood Racks Truck Bed Bike Carrier - Fork Mount - Bolt On.
# 7
Thule Insta-Gater Pro Truck Bed Bike Rack - 1 Bike
Linda and I recently ordered two Aventon Pace 500 NextGen E-bikes from [bike store] in Madison, WI. Not wanting to just toss our expensive new bikes in the back of the p/u when they arrive next month we promptly ordered the Thule Instagator from etrailer. My prior experience with etrailer came as a recommendation from a friend. I was able to do quite a bit of the research on etrailers website, the demonstration video extremely helpful and we placed an order. The racks were in-stock, shipped promptly, etrailer providing a very nice tracking link that included pics of the staff involved in processing the order and a map of the route all the way to delivery. Absolutely 1st rate service. The racks showed up in perfect condition about two days after placing the order, exactly as promised. We are very pleased with etrailer, will most certainly be ordering from them again and recommend this company w/o reservation. Nice job etrailer!
This is the best bike rack system I have used so far. I tried roof racks, truck bed tension racks, and tail gate pad. We used this for the first time today, and I am very pleased. Our bikes were very secure and the system is easy to use. Two thumbs up!
# 8
Swagman XTC2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
First-time rack buyer / owner / installer. The rack arrived in a timely fashion, maybe a day or 2 ahead of schedule. It was well packaged. I’m LOVING this bike rack. It was easy to put together and to mount on my new Honda Passport. Thus far, no squeaks in my 2” receiver. Hardest part of initial set-up is figuring out the best way to position two bikes. Trial & error and some patience. The directions weren’t clear as to where the 2 left-over screws went. I found the answer in another review and have posted a pic in case others have the same problem (photo with pen pointing at screw). These screws go in the underneath side of both of the folding arms. They appear to keep the wheel wells from sliding off in case in you drive with an empty, un-folded rack, and forgot to tighten down the wheel wells. The folding arm push / pull pins can be difficult at times. I coated the tips with some lube. That and a little jiggling seems to solve that issue. I guess it’s better for the pins to be snug vs popping right out. I added a small Master lock to the hitch pin (in lieu of the provided cotter pin) as a theft deterrent. I read that a 3/16 shackle lock will fit into the bike clamp down arms to also act as a deterrent. I had an old 3/16 lock that did snugly fit and appeared to be locked. HOWEVER, I yanked on the lock and it came open as there isn’t quite enough clearance for the shackle to lock. I discovered that longer 3/16 shackle locks are hard to find. Have attached a photo of the lock that actually fits and works (Ace Hardware). One lock on the upper clamp down arm will secure both arms as the lower arm can’t be removed without removing the upper arm. The clamp down arms appear to be coated to prevent damage to your bike. I’ve tried a simple rag and ultimately settled on pool noodle pieces as a precautionary measure. I CAN NOT open my tailgate (regardless of whether or not the rack is fold up and in the bike carry position). If that’s a concern for you, then spring for the more costly titling version. My back-up camera still functions.
The Swagman XTC-2 platform bike carrier arrived very quickly from etrailer and in good shape, the actual carrier box is inside another shipper box, which I'm sure helped with its condition. Assembly was relatively quick and painless, even though the instructions could be a little more thorough. Installing the carrier on the back of our Jeep Patriot also was quick, it helps to have an extra ratchet & 3/4" socket laying around for just this purpose. Installing the bikes takes a little patience and trial and error the first time you try and put them on the carrier. It's easy enough to adjust the wheel holders to fit the wheelbase of your bikes, but for us at least, the challenge was trying to swing the vertical support bar up into position after putting on the first bike (closest to the Jeep). We couldn't angle the bike enough toward the Jeep to have the bar clear the bike. We learned that the easiest way to secure the first bike was to remove the ratcheting frame hooks altogether, put the bike in the carrier, swing up the vertical support bar, put in the pin, and then slide one of the frame hooks down on the bar. The outside bike is much easier because you can set the bike in the carrier at whatever angle you need, not being limited by the back of the vehicle. One thing we did to protect the bike frames was to use some foam pipe insulation as cushion between the frame hook and the frame (see pictures). Once you get a system for installing the bikes, it is very quick to load/unload them. The rack seems to be well made and doesn't wiggle excessively when traveling. All in all a good product for a good price, would definitely recommend it for anyone looking for a platform bike carrier.
# 9
Thule GateMate Pro Tailgate Pad for Full-Size Trucks - Up to 7 Bikes - 53" Wide
I only gave this 3 stars because the straps that fasten the bike to the pad is to long to use on a tube for a normal road bike. The straps are 16 inches long and it wraps around my bikes twice leaving no room to fasten the strap together. I thought this seemed strange so I called etrailer customer service which gave me Thule service number and they seem to understand the issue but had the only solution of using a zip tie. It seems the straps work for a Mountain bike but not for smaller tubed bikes. Just keep this in mind when ordering. I also think you will need to secure the back of the bike if you are only hauling 1 or 2 so the not flop around.
Very sturdy and well made. Great for a barrier between bikes and tailgate so it is not scratched. The camera flap is a plus so the rear view camera is accessible. No issues a year after purchase. Fits a 2014 Chevy Silverado 1500 and 2022 RAM 2500 equally well.
# 10
Hollywood Racks Destination Bike Rack for 4 Bikes - 2" Hitches - Frame Mount
Great personalized serve Outstanding delivery and free shipping Easy to assemble Well thought out and will be a cinch to use Rock solid on my Jeep Grand Cherokee Outstanding value!!! Thanks 1000k!
Ok so I I was going to buy a safari rack which ended up being about $100 more once you tacked on taxes and shipping from another website. This was on sale and had really good reviews. I bought this and have used it long enough to leave an honest review. It’s a really good rack, quality built, and If anything should break on the rack etrailer has all the replacement parts for very cheap prices. I have used this racks for shuttle duties and held 4 big enduros bikes several times. You don’t need to use the extra red straps sent with the rack for the bikes to be very secure. As someone stated before in the reviews long wheelbase bikes like size L or XL frame enduro or DH bikes might only be able to strap one wheel and frame attachment (the one wheel will be too long to get a good strap on), but all you need to do is drill a hole and move the clamp outboard about 2” and you’ll be good as gold. This rack is awesome and was a heck of a deal. Would recommend and buy again if I ever needed 2 racks? Also not to mention (not that I really care), but the rack was packaged really nice and didn’t come all damaged from shipping, it was really nicely formed foam that was glued in place and not just some hack job some guy tossed in a box. 10/10 !
# 11
Thule EasyFold XT Bike Rack for 2 Electric Bikes - 1-1/4" and 2" Hitches - Frame Mount
Had it for about a year and love it. I think it is the best Bike Rack for Ebikes out there. It is easy to set and load the bikes plus gives excellent security with the various locking options.
I purchased the rack and receiver hitch a year ago. Installation of the rack was made simple with the installation video that was specific to my vehicle (2020 Honda Accord). Literally took less than an hour start to finish. Only tool that I needed to buy was a torque wrench, which was about 20 bucks. It did require a very small cut in the plastic bumper that was accomplished easily with a keyhole saw. There was no drilling or other significant issues. The rack itself is awesome! My wife and I have two Lectric XP3 bikes. They weigh about 65 pounds each with battery. When we travel I revome the batteries to save a bit of weight. I have made two cross country trips (over 6000 miles) with this rack and have never had an issue. Literally every gas stop or hotel stop someone asks me about the rack and bikes. It really is that nice. My wife usually scolds me because we lose a 1/2 hour of travel time each stop to visit with complete strangers:) The rack is easy to install and remove on the receiver hitch. The lockout feature works great and gives a great deal of peace of mind. The bikes are easy to load. I don't use it, but there is a ramp that could make loading the bikes easier if a person couldn't lift the bike onto the rack. There are two arms the lock onto the frame of the bikes similar to the receiver hitch. Once locked down the bikes will not move. I would recommend ordering the longer ratchet staps if you have fat tires. I think they cost around 20 bucks but the longer straps allow for a little more flexibility in arranging bikes on the rack. I would strongly recommend this product and this company.
# 12
Swagman Patrol Truck Bed Bike Rack for 2 Bikes - Fork Mount - 9-mm Skewer and 15-mm Thru-Axle
rack tends to work itself loose from bed walls during long trips. had to strap down with ratchet straps to keep from moving. locks only work at a specific angle -- wish the manual had said this because we couldn't lock our bikes until figuring it out.
Excellent Customer service and help for this product. Thank you Carol and Neil your the best.
# 13
Thule GateMate Pro Tailgate Pad for Full-Size Trucks - Up to 8 Bikes - 60" Wide
I only gave this 3 stars because the straps that fasten the bike to the pad is to long to use on a tube for a normal road bike. The straps are 16 inches long and it wraps around my bikes twice leaving no room to fasten the strap together. I thought this seemed strange so I called etrailer customer service which gave me Thule service number and they seem to understand the issue but had the only solution of using a zip tie. It seems the straps work for a Mountain bike but not for smaller tubed bikes. Just keep this in mind when ordering. I also think you will need to secure the back of the bike if you are only hauling 1 or 2 so the not flop around.
etrailer has been great in the past and I will order from them again. This experience was mediocre because they advertised free 3 day shipping through a google search for this product. After paying I was notified that it would take longer. I needed the gate mate for a weekend trip and could have gotten it through [online vendor] for the same price, quicker. Not a big deal, just be aware.
# 14
Curt Clamp-On Bike Rack for 3 Bikes - 2" Ball Mounts
I bought this due to decent reviews. Shipping was rather quick, within 4 days of ordering. Loading all 3 bikes was very tight with two adult bikes and one child bike, but I made it work. As another person posted, the rack is pretty difficult to push down and secure. It takes a lot of force I don't think my wife could have done it. The first time when I tested installing, when I tried to release the rack, it released hard and hit my knuckles. The second time, the spring loaded pin broke (pictures attached) and, once again, my knuckles got hit. Caution really needs to be taken if you have this product. I am giving two stars for this due to the safety concern and the plastic handle breaking. I will be returning for a refund.
The only thing I do not like is when you use the handle to take it off. It springs and hits your hand ever single time. Other then that it is nice.
# 15
Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount
Ordered it and had it at my house within a week, instructions were clear and easy to follow, and so far it’s a perfect fit for what I needed it for!!
# 16
Rhino-Rack Hybrid Roof Bike Rack - Wheel Mount - Clamp On - Aluminum
Great bike carrier! Etrailer always provides me with high quality products with fast deliveries.
I love the racks, instructions were understandable, one of my end caps came in bad, it can wiggle off after locking but I emailed etrailer and they arranged a replacement quick with rhino rack, pretty nice of them, comes with rhino rack decal and just have to decide where to put it, out my bike up and took it for a test drive and it was very nice, I love their package because it comes with locks and way cheaper than the competitors, very satisfied
# 17
Yakima FrontLoader Wheel Mount Bike Carrier - Roof Mount
Overall I am happy with these bike carriers. They mount to the racks over the bed of my Tundra TRD Pro. Installation is simple. I think they could be just a bit sturdier because there is just a bit of wobbling when driving on bumpy roads but I'm not too worried about them coming dislodged. Take note that although they come with a cable lock to attach the bike to the carrier, the key is sold separately.
I already own a FrontLoader and love these carriers. Bought the 2nd one to replace a Raptor Aero carrier that I have had for a long time.
# 18
Curt Bike Rack for 5 Bikes - 2" Hitches - Tilting
It was obvious that we received a product that was returned by someone else when the box was overly taped shut, a support collar was broken, and most of the pieces were out of their ripped plastic bags. However, it was a great price to hold 5, 26" and/or 27" Trek bikes. I used a piece of the broken collar and went ahead and assembled the rack. Due to the weight of the 5 bikes it did not wobble that much when driving, as one of the bike tires was up against my car. I can only imagine that if we received an untampered product that this review would have been 5 stars. The picture is a little hard to see, but there are 5 Trek bikes on the rack on my 2020 Toyota Seinna.
We received a damaged box, damaged items, no instructions, the nuts and bolts are completely stripped and not inside a bag. This was obviously used, returned, not checked for quality and sent out. We are extremely upset.
# 19
Rhino-Rack Hybrid Roof Bike Rack for Fat Bikes - Wheel Mount - Clamp On - Aluminum
Was very happy with the bike mount. It went together very easy, fit my rails and my bike great. Only complaint is that there was no padding on the rear rail clamp. I didn’t want to rub the paint off my rails so I added a thin piece of rubber and it works perfectly.
Best roof rack I've purchased. I've had it for over a year. It's way better than Thule - more secure and way easier to take on and off - and less expensive. I use it for my road bike and fat back with equal ease. The unique way it attaches to your car rack makes it likely to fit almost any rack. For me, I've used it for a 2016 Sequoia and a 2017 Macan S. BTW, this is one of the few racks I've found that nicely carry a fat back. My tires are 4.5" wide, 26.5 tall...also used it for my 29er on occasion, but fat bikes are way more fun than 29ers. If I were to complain, it is the arm gets a bit stiff sometimes and need to oil it, where my Thule is less inclined to need it...but this complaint does not diminish it from being an excellent/5 start product.
# 20
Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Gunmetal Gray
This thing is built like a tank! It is of the best fit and funtion I have seen in a bike rack! Solid as can be, fits my bikes perfectly and looks awesome! Plus it folds completely out of the way to access the rear liftgate on my 2022 Rav4!
Great service from etrailer and the rack arrived as expected. Fairly easy assembly. OK video on Kuat’s site, but didn’t cover the foot pedal. Really glad we got the 2” hitch. It tightened up and we’re impressed with the quality and the stability of the rack. We haven’t done a road test yet, but look forward to putting it to the test. We have a Ford F-150 and it works great. The bikes were fairly easy to load with the batteries out and two people. We do need the strap extenders for our RadMini Step Thru’s. The tires are too big for the ones that come with. Only one set of extenders came with the bike and one adapter for a smaller tire. It’s okay, but since it’s a two bike unit, would have been nice to have both extenders. Otherwise, we are really liking the look and stability.
Kuat TRIO Roof Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 1500, we're going to be doing a test fit of the Kuat Trio. This is going to be your roof rack mounted bike carrier. It's going to be part number TR02. The first thing you're going to want to do is set it up with that pad that's here on the bottom, this plastic pad, that's going to sit over your front bar. Then, we'll go ahead and open up our front door, get up where we have a good position, and then simply place these clamps under the bar, like so. Then we'll take our nuts and thread those down over the top.
Swagman Hitch Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 1500 we're going to be doing a test fit of the Swagman Trailhead 4-bike rack. It's going to come with an 1-1/4" shank with a 2" sleeve, and it's going to be part number S63380. Let's go ahead and take our shank and insert that into our receiver that we have here today. Once you got it inserted go ahead and line up your pinholes so we can insert our anti-rattle bolt. Once you've gotten that anti-rattle bolt threaded in as far as you can, go ahead and tighten that down with a 3/4" socket. This anti-rattle bolt will help to eliminate a lot of the sway, rattle, or wobble that you may have remaining in your hitch as you can see there.
Softride Element Parallelogram Hitch Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 1500 we will be doing a test fit of the Softride Element Parallelogram. This is a 4-bike rack and it comes with either your 2" and an adapter for your 1-1/4" shank. It's going to be part number SR26248. We'll go ahead and fit this on the vehicle. Insert our shank into our receiver. After we get that inserted we'll go ahead and take our bolt, line up our pinholes, and thread that in.
Swagman XTC4 Hitch Bike Racks Review - 2015 Ram 1500
Today, on our 2015 Ram 1500, we'll be doing a test fit of the Swagman XTC4. This is a platform style 4-bike rack, and it's going to be part number S64665. It has a 2-inch shank on it for 2-inch hitches only. We're going to go ahead and put that in our 2-inch receiver we have here today. We got it inserted where we want it. Let's go ahead and line up our pin holes.
Thule Hitch Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 1500, we're going to be doing test fit of the Thule Vertex Swing. This is a 4-bike rack. It comes with a 2-inch shank. It's going to be part number TH9031XT. Let's go ahead and test fit this into our receiver. Once you get your shank into your receiver, let's go ahead and line up our pin holes.
Thule Hitch Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 1500, we're going to be a test fit of the Thule Vertex 4 Bike Rack. It's going to have an 1-1/4 inch shank with a 2-inch adapter. It's going to be part number TH9029XT. Let's go and do our test fit. Take your 2-inch adapter and put it in the 2-inch receiver that we have here today. Once you have it inserted, go ahead and line up your bolt holes or pin holes.
Saris Bike Porter Hitch Bike Racks Review - 2015 Ram 1500
Today, on our 2015, Ram 1500, we're going to be going over a test fit of this SARIS Bike Porter, 4-bike carrier. This is going to have an inch and a quarter shank, with a 2 inch sleeve on it, and your part number is going to be, SA404B. Insert your shank into our receiver. With the shank in our 2 inch receiver, let's line up our pin-holes and take our anti-rattle bolt and insert it. Once you have your anti-rattle bolt inserted, screw that in. Since we've got it tightened down as far as we can by hand, let's take our 3/4 inch ratchet and tighten it down the rest of the way. This will help eliminate a lot of the rattle, sway, or wobble we may have left in our hitch, as you can see there.
Yakima FullTilt Hitch Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 1500, we'll be test fitting the Yakima FullTilt 4 Bike Carrier, this has got an inch and quarter shank, with a 2 inch sleeve on it. Its part number's going to be, Y02462. Let's go ahead and do the test fit. Go ahead and take your shank and insert it into your receiver. Make sure that this gray piece is down so you have an easy job inserting it. It also has an auto-locking pin so that won't come out.
SportRack Hitch Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 1500, we're going to be going over a test fit of the SportRack Platform Style 4-Bike Rack. It's going to be part number SR2902. It comes with a 2-inch shank. I'm going to go ahead by starting off and inserting that into our 2-inch receiver. Let's go ahead and line up our pin holes. Once you've got them lined up, go ahead and take your anti-rattle bolt that's included, as you can see there, and insert that into our hole and thread it in.
Swagman Pick Up Truck Bed Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 1500, we're going to go ahead and do a test fit of the Swagman Pick-Up Truck-Bed-Mounted 2-Bike Rack. This would be Part Number S64702. First thing we're going to do is you're going to locate the locking mechanism. We'll go ahead and take our key, insert it with the tip down, and go ahead and turn that one full turn, and pull it out. That will allow the knob to be out here to where we can push the nipple in, and pull that part down. With that part down, we will go ahead and place the edge of this on the line on our bed.
Pro Series Hitch Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 1500 we're going to be doing a test fit of the Pro Series Q-Slot. This is a 2 and 4 bike rack. It's going to be PS63138. This is for 2 inch receivers only. We'll go ahead and take our 2 inch shank and insert that into our receiver that we have here today. Go ahead and line up our pin holes. Once you have your pin holes lined up, go ahead and take your anti-rattle bolt and thread that in.
Thule Hitch Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 1500 we're going to be doing the test fit of the Thule Vertex 5-bike rack. It's got a 2" shank on it for 2" hitches only and the part number is going to be TH9030XT. Let's go ahead and take the shank and insert that into our hitch. Once you get it inserted let's go ahead and line up our pinholes. Once you have those pinholes lined up, go ahead and thread in the bolt. Once you have that threaded in as far as you can get it with your hand, go ahead and use a 3/4" socket to tighten it the rest of the way.
Saris Freedom Hitch Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 1500 Series Crew Cab, we'll be test fitting the Saris Freedom Platform Style Tilting 4 Bike Rack, that's part number SA4414B. This is for 2 inch hitches, we've got a 2 inch receiver here today. We can go ahead and begin by inserting our shank into our receiver. Next thing I'm going to do is we'll line up our pin holes. Once that is lined up we'll take our included anti rattle bolt and thread that through and we'll take our socket wrench and tighten that the rest of the way down. Nice thing about this anti rattle bolt it is going to help reduce the play and rattle within our hitch and our bike rack.
Saris Thelma Hitch Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 1500 series crew cab we will be test fitting the Saris Thelma platform-style 3-bike rack. That's part number SA4239B. This can be used for either 1-1/4" or 2" hitches. We've got our adapter on our shank down there for our 2" receiver here today. We can go ahead and begin by inserting that into our receiver. Next thing we want to do is line up our pinholes.
Saris Freedom SuperClamp Hitch Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 1500 series Crew Cab, we will be test fitting the Saris Freedom Super Clamp platform style 2 bike rack. That's part number SA4025. This can be used for either 1 and 3/4 or 2 inch hitches. We have got a 2 inch hitch here today. We can go ahead and begin by inserting our shank into our receiver.Line up our pin holes. When we get those lined up, we will take our included anti-rattle bolt and lockand thread that through.
Saris Axis Hitch Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 1500 series crew cab we will be test fitting the Saris Axis tilting 2-bike rack. That's part number SA832. This can be used for either 1-1/4" or 2" hitches. We've got our adapter here for our 2" receiver. We can go ahead and begin by inserting our shank into our receiver. Next thing we'll do is we'll line up our pinholes.
Hollywood Racks Traveler Hitch Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 1500, we'll be doing a test fit of the Hollywood Racks traveler 5-bike carrier. This is going to come with your 2" shank for your 2" hitches only. This is going to be part number HR9200. Let's go ahead and take our shank and insert that into the receiver. Once you've lined up your pin holes, you'll go ahead and take your anti-rattle bolt and thread that in as far as you can. Once you're unable to get it any further by hand, go and use a 3/4" socket to put it the rest of the way in. This anti-rattle bolt will help to eliminate a lot of the sway, rattle, and/or wobble that you may still have in your hitch.
Hollywood Racks Traveler Hitch Bike Racks Review - 2015 Ram 1500
Today on our 2015 Ram 100 we're going to be doing a test fit of the Hollywood Racks Traveler 4-bike carrier. It's got a 1-1/4" shank with a 2" sleeve. Part number is going to be HR8500. Let's go ahead and take this shank and insert it into our receiver. Once you've got it inserted, let's go ahead and line up our pin holes. With our pin holes lined up, go ahead and insert your anti-rattle bolt, and thread that in as far as you can by hand. Now tightening this anti-rattle bolt will help to reduce a lot of your sway, rattle, or wobble that you may still have left in your hitch.
What our customers are saying:
"Sent out an e-mail to you earlier this week asking which hitch woudld be the best choice for installing on a 2000 Venture van for hauling a bike rack with two bikes. You suggested the one that would be easiest to install..received in a matter of days..installation went great ..very well thought out instructions. Everything went smooothly and the hitch is up nice and snug..doesn't stick out..looks great."