bing tracking image

Best 2014 Kia Sorento Cargo Carriers

change vehicle


Cargo Carriers Videos

Pro Series Solo Hitch Cargo Carrier Review - 2014 Kia Sorento

Today on our 2014 KIA Sorento, we will be test fitting the 31 by 47 Pro Series Solo cargo carrier for 2 inch hitches. With a 400 pound weight capacity, it's part number is PS1040100. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up our pins holes, insert our pins, and secure it with a clip. With our carrier secure, we will have about 13 inches of ground clearance at the rear. The closest point of the carrier to the back of our vehicle is about 7 3/4 of an inch. Overall, we've added about 39 1/2 inches to the length of our Sorento. The exhaust on our Sorento exists on the passenger side and it points directly out of the rear of the vehicle towards the cargo carrier. It's about 10 1/2 inches from our carrier.



MaxxTow Hitch Cargo Carrier Review - 2014 Kia Sorento

Today on our 2014 Kia Sorento, we will be test fitting the 17x50 Maxxtow cargo carrier for 2-inch hitches. With 500-pound weight capacity, its part number is Mt70107. We'll begin our test fit by sliding the shank of the carrier into the receiver tube of our hitch, line up our pinholes, insert our pin, and secure it with the clip. In this position, you'll have about 10-1/2 inches of ground clearance at the rear of the carrier. The closest point of the carrier to the back of the vehicle is about 3-1/2 inches, and overall, we've added about 22-1/4 inches to the length of the Sorento. The exhaust on our Sorento exits on the passenger side, and it points directly out of the rear of the vehicle, towards the cargo carrier. This should be considered, when transporting heat sensative materials.



Surco Hitch Cargo Carrier Review - 2014 Kia Sorento

Today on our 2014 Kia Sorento, we will be test fitting the 24X60 Surco Cargo Carrier for two inch hitches with the 500 pound weight capacity. It's part number 52018. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of our hitch. Line up our pinholes, insert our pin, and secure it with a clip. In this position, we'll have about ten and three quarters of an inch of ground clearance at the rear of our carrier. The closest point of the carrier to the back of the Sorento is about an inch and a half.



Rola Dart Folding Hitch Cargo Carrier Review - 2014 Kia Sorento

Today on our 2014 Kia Sorento we will be test fitting the 23x56 ROLA Dart Cargo Carrier for 2 inch hitches. With a 450 pound weight capacity, it's part number 59550. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of our hitch. We'll want to line up our pin holes, thread in our anti-rattle bolt, and tighten it with a wrench. With our carrier secure, we'll have about 11 inches of ground clearance at the rear. The closest point of the carrier to the back of the Sorento is about 3 and 3 quarters of an inch, and overall we've added about 10 and a quarter inches to the length of our vehicle.



Curt Folding Aluminum Cargo Carrier Review - 2014 Kia Sorento

Today in our 2014 Kia Sorento we will be test fitting the 19x60 Curt Folding Cargo Carrier for two inch hitches. With a five hundred pound weight capacity, it's part number is C18100. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of our hitch, line up our pinhole, slide in our pin, and secure it with our clip. In this position we have about nine and a half inches of ground clearance, the closest point of the carrier to the back of the vehicle is about two and a half inches. And overall we've added about six and a half inches to the length of our Sorento. Pulling the pin and clip at the base of our rack will allow you to fold it into its loading position. We will want to reinsert the pin and clip to secure it. In this position you will have about eleven and a half inches of ground clearance at the rear of the carrier.



Curt Hitch Cargo Carrier Review - 2014 Kia Sorento

Today on our 2014 Kia Sorento we'll be test fitting the Curt 17 by 46 Cargo Carrier for inch an a quarter and two inch hitches with a 500 pound weight capacity. It's part number C18145. To begin our test fit we'll slide the shank of our carrier into the receiver tube of our hitch, line up our pin holes, thread in our anti-rattle bolt, and tighten it with a wrench. In this position you'll have about 11 inches of ground clearance at the rear of the carrier. The closest point of the carrier to the back of the vehicle is about two and a quarter inches. Overall we've added about 21 and a quarter inches to the length of our Sorento.





2014 Kia Sorento Cargo Carriers Questions