Best 2012 GMC Sierra Bike Racks

I have not had the chance to actually use it yet. I did get it out and checked it's instalment in the bed of my pickup. If I had actually read the instruction it would have been simple (I'm a guy). I will install it again after I have the truck bed coated. I am thinking of modifying it so I can lock it in place with out disappearing while it's out of sight.

Very very sturdy! I had my doubts at first but those quickly went away after I installed and mounted my bike! Highly recommended for people with tool boxes!

Congrats to etrailer for the quick shipping....I think I ordered the bike rack on Saturday and received it UPS on Tuesday afternoon. EZ to assemble, was pretty straight-forward, didn't even have to refer to the instructions much. Maybe watching the video on the web site helped. I put 2 bikes on the rack, a little adjustment here and there, and looks good to go. I installed the rack on my GMC Sierra pick-up. Looks to be a very sturdy mount for the bikes, think they will ride fine with no problems. Maybe this weekend or next, we'll take the bikes to the forest preserve trail nearby and give the rack a road test. Looks like should be no problems, and would definitely recommend.

First-time rack buyer / owner / installer. The rack arrived in a timely fashion, maybe a day or 2 ahead of schedule. It was well packaged. I’m LOVING this bike rack. It was easy to put together and to mount on my new Honda Passport. Thus far, no squeaks in my 2” receiver. Hardest part of initial set-up is figuring out the best way to position two bikes. Trial & error and some patience. The directions weren’t clear as to where the 2 left-over screws went. I found the answer in another review and have posted a pic in case others have the same problem (photo with pen pointing at screw). These screws go in the underneath side of both of the folding arms. They appear to keep the wheel wells from sliding off in case in you drive with an empty, un-folded rack, and forgot to tighten down the wheel wells. The folding arm push / pull pins can be difficult at times. I coated the tips with some lube. That and a little jiggling seems to solve that issue. I guess it’s better for the pins to be snug vs popping right out. I added a small Master lock to the hitch pin (in lieu of the provided cotter pin) as a theft deterrent. I read that a 3/16 shackle lock will fit into the bike clamp down arms to also act as a deterrent. I had an old 3/16 lock that did snugly fit and appeared to be locked. HOWEVER, I yanked on the lock and it came open as there isn’t quite enough clearance for the shackle to lock. I discovered that longer 3/16 shackle locks are hard to find. Have attached a photo of the lock that actually fits and works (Ace Hardware). One lock on the upper clamp down arm will secure both arms as the lower arm can’t be removed without removing the upper arm. The clamp down arms appear to be coated to prevent damage to your bike. I’ve tried a simple rag and ultimately settled on pool noodle pieces as a precautionary measure. I CAN NOT open my tailgate (regardless of whether or not the rack is fold up and in the bike carry position). If that’s a concern for you, then spring for the more costly titling version. My back-up camera still functions.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

The fit for a 2014 Ram was spot on, no issue with the wide style tailgate top and the access flap for the tailgate handle lined up perfectly. Material is durable and easy to clean, the only thing holding it from a 5 stars is if it had the padded dividers on top to keep the bikes separated. But for the price, the fit and finish was exceptional, great value !!!

The product review/installation video helped me make my selection. I selected the full size pad for 2001 Silverado 1500. Installs easily, fits nicely, flap in pad is positioned for easy access to tailgate latch.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

So far I’ve just assembled it and took a quick test drive around the block. My initial thought is this thing is perfect. It’s super sturdy and easy to use. My only gripe and it’s not fault of the rack, but it’s heavy…

Click to Enlarge

Click to Enlarge

Click to Enlarge

If you've done any research or read any of the other comments on either this rack, or this seller...rest assured they really are as good as everyone says! I ordered my rack on around 4pm est on a Friday afternoon and within an hour I received an email that said they have shipped my product AND upgraded to priority shipping. Can't say enough positive things about the customer service! When the rack arrived, it took me a little over half an hour to get it set up. Probably would e been faster if I were even slightly mechanically inclined (or if didn't I didn't have to borrow a socket wrench from my neighbor). We finally had an opportunity to load up the bikes and head out for a ride today. As others have said, the first time you load up your bikes, it's kind of like a puzzle to get them situated. Took about 15 minutes. This rack is awesome! Very sturdy and the bikes were very secure. Only racks I have had in the past were rooftop fork mount racks. This is so much easier! On e we got to the trail (over an hour drive) getting the bikes off was a piece of cake. Afterwards, it was time to load them back up and it was less than 5 minutes to get them all on and ready to hit the road. There were other 4-bike racks on the website, but this one had enough great reviews that I felt comfortable making the purchase. After the fact, I'm very glad I did! I can't imagine the $800 rack can be that much better than this, and I highly recommend this for anyone looking for a 4-bike platform rack. I will definitely recommend this rack and etrailer.com to everyone I know.

Click to Enlarge

Click to Enlarge

Click to Enlarge

The Hollywood Racks Truck Bed Bike Carrier - Fork Mount - Bolt On, is just what I was looking for to be able to build a bike rack for carrying one of my bikes on my motorcycle. It was easy to mount and it holds my bike in place while riding on bumpy dirt roads, city streets, highways and even when I hit some twisty country roads. It's really easy to load and unload my bike when I get to where I want to ride. I use a velcro strap around the quick-release and the fork arm as an added safety as well as a couple tie-downs from my bike handlebars to my motorcycle passenger pegs to help distribute the weight on my rack. If you want to build your own DIY bike rack I totally recommend the Hollywood Racks Truck Bed Bike Carrier - Fork Mount - Bolt On.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Love this product! I built a great bike carrying system for my F-150 using two of these fork clamps. They are easy to install and extremely well made. No more tangled bikes and lots more room in the bed for other stuff! Best way to go for a nice bike rack system. Thanks, Phil T.

Click to Enlarge

Click to Enlarge

Click to Enlarge

1. One star ding for price. Fairly expensive for a single bike, especially after adding a lock core. 2. The rack works exceptionally well and I'm not disappointed with the purchase. Installation is fairly simple. It does take a bit of fiddling to get the tension down on the rack clamps (connecting it to car) but it is a simple affair, and I'm able to move it between an aero rack and a round rack with out adjusting the tension. The sliding tray in the rear is a bit sticky, so if you carry bikes of different wheelbases, you may need to add some lubrication to the tract. Front wheel locks into place (I've used 700x25 and 29x2.3) simply, and the clutch in the tension wheel is a nice addition. It would be nice if there was a quick release button (like in times past) but it spins fairly quickly to unload. The locking whip is a nice addition. I have been able to rout it over the chainstay on both bikes. However, it is too short to route around chainstay and wheel. I'd prefer to include my rear wheel inside the lock. Overall, I'm very happy with the product.

Click to Enlarge

I bought two of these, they work great, good the bikes very solid and I'm confident using them over hundreds of miles. etrailer.com is my go-to for tracks and accessories

This rack is great. The adjustable tilt feature is convenient. The price point is solid for the quality. The 4 star rating is simply because some of the plastic melted due to exhaust heat when the rack was in the bikeless up position. Küat warranty and customer service was great. They are replacing the hook. If you're thinking of this for a 2021 Forester, definitely get the Hi-lo adapter so that the hook doesn't sit in line with the exhaust.

Click to Enlarge

Click to Enlarge

I had waited a long time to get this Kuat rack and I am glad I did. The build quality is excellent and using the box as an assembly platform is a nice touch. It went together easily with 3 bolts and secures to the hitch very securely with little to no wobble once the adjustment knob is tightened. My last hitch rack used a threaded bolt to secure it to the hitch and that did an ok job to reduce sway but so far this method is much better. Loading bikes is easy and it holds then securely. I haven't used the security cable yet, other than to test it out, but like anything else I consider it more of a deterrent than anything else as I doubt I would leave my bikes loaded w/o being able to keep eyes on them. Overall this was a good purchase and etrailer was fantastic throughout the process as well. They offered an alternative when I ordered as this item was out of stock, but this is what I wanted so I was prepared to wait. Then to my surprise it shipped almost 2 months earlier than expected! They of course notified me when it was shipped and when it was delivered and made sure I had a contact at etrailer if I had any questions with the rack. Overall it was a great process and a great looking and functioning rack.

Click to Enlarge

Click to Enlarge

Click to Enlarge

This Curt bike carrier is ideal for my front hitch that I recently installed on my 2005 GMC. I had to remove my front tag holder for clearance but it works perfectley. It can be easily removed and installed on the back hitch when I'm not towing my camper. This is a well built and solid bike carrier. It was delivered very timely and well packaged.

Click to Enlarge

Click to Enlarge

This rack has worked well for us. I fits the Curt hitch perfectly. It is easy to attach bicycles securely. We can get three adult bicycles on this hitch (see photo). There are sufficient means to protect against sway.

Click to Enlarge

This is an outstanding rail. And is the second one that I have bought. For a matched set. They were great on my BMW roof racks. Outstanding product as always. Thank you

Click to Enlarge

Click to Enlarge

Simple and easy. It fits my channel aero bars perfectly!!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Fantastic bike rack!! After getting fed up with loading my bike up repeatedly in the back of my 2003 GMC Sierra pickup (with a hard top cover) I decided to purchase this kuat rack. I wish I would’ve sooner. Assembly was easy and straight forward however I would use a magnetic parts bowl if I had it to do over. Kuat doesn’t included any extra nuts so I had to contact them to get another after I dropped and lost one (they were very polite and shipped one right away.) As far as function goes this rack is really easy to use. Just slide it into the receiver and put the lock pin it. Just like in the video you then tighten the knob at the back to secure the hitch so there is no movement. Load your bikes up and secure them and you’re ready to go. I did utilize the retractable cable locks after my ride when stopping to eat and they are very easy to use. No worries at all about a stolen bike. And the tilting feature is great too. It does allows you to access your truck bed with the tailgate down just as in the video. As an added bonus this rack fits perfect in my standard size truck bed even with the hard top cover closed (my truck is too long to fit in the garage with the rack folded up installed in the hitch.) Michael H. was outstanding providing schematic drawings with the dimensions so I would know this before my purchase (they’re on the Q&A page.) The free shipping was very fast so that made the purchase even better. I will definitely be a repeat customer as eTrailer is the one of the best companies out there with great customer service and timely communication. Great job!!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Really quick and accurate shipping from etrailer - Thanks! Just put the rack together and tried it out. It's everything I was looking for and solidly built. No more taking the wheels off bikes when putting them on the rack. Built-in locking, hitch locks too, tilts and folds, and a work stand. What more could you ask for.

Fantastic bike rack!! After getting fed up with loading my bike up repeatedly in the back of my 2003 GMC Sierra pickup (with a hard top cover) I decided to purchase this kuat rack. I wish I would’ve sooner. Assembly was easy and straight forward however I would use a magnetic parts bowl if I had it to do over. Kuat doesn’t included any extra nuts so I had to contact them to get another after I dropped and lost one (they were very polite and shipped one right away.) As far as function goes this rack is really easy to use. Just slide it into the receiver and put the lock pin it. Just like in the video you then tighten the knob at the back to secure the hitch so there is no movement. Load your bikes up and secure them and you’re ready to go. I did utilize the retractable cable locks after my ride when stopping to eat and they are very easy to use. No worries at all about a stolen bike. And the tilting feature is great too. It does allows you to access your truck bed with the tailgate down just as in the video. As an added bonus this rack fits perfect in my standard size truck bed even with the hard top cover closed (my truck is too long to fit in the garage with the rack folded up installed in the hitch.) Michael H. was outstanding providing schematic drawings with the dimensions so I would know this before my purchase (they’re on the Q&A page.) The free shipping was very fast so that made the purchase even better. I will definitely be a repeat customer as eTrailer is the one of the best companies out there with great customer service and timely communication. Great job!!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Really quick and accurate shipping from etrailer - Thanks! Just put the rack together and tried it out. It's everything I was looking for and solidly built. No more taking the wheels off bikes when putting them on the rack. Built-in locking, hitch locks too, tilts and folds, and a work stand. What more could you ask for.

The good: I like the way the bikes are held in and the ability to add the upright adapters to the bike frame holders. The straps are quality too. For a jeep with a spare tire, this is the perfect length to clear it. This rack is 5 stars from the bike holders to the base of it. The bad: the 2"receiver adapter and bolt are insufficient. I wish they made this in a solid 2" hitch. The entire setup is held into the receiver by a very short bolt. It only goes about half way into the receiver tube. So your hitch is only "secured" on one side. A hitch pin or bolt should go through the receiver tube completely imo so it can be secured on the other end with a retaining clip or nut. Because this only goes in the one side, the entire weight of the rack plus bikes are held tight to one side of the receiver by the undersized bolt and washer. A few bumps down the road and that bolt loosens. Now instead of distibuting the weight of the rack and bikes on the receiver and post, it's completely up to the bolt to keep you from losing the rack. The bolt threads get damaged too. I took this down a dirt road and nearly lost everything. I had to buy my own bolt with hd fender washers and lock washers to correct this. Thule should've provided this from the start. The current short bolt design where only one side of the receiver secures the rack is unacceptable. This rack is 1 star at best for the connection to the receiver.

Click to Enlarge

Hitch pin broke before I got it. Looks like a poor design for the locking pin, they might want to consider a different design. I got a 3/8 shear pin from Home Depot to replace and it works great. Bike rack is great!

Click to Enlarge

So after much research into bike racks, I decided on pulling the plug on the Kuat Sherpa 2.0. I've looked into the Kuat NV and other brands, but they were just too much for my needs. If you've got "regular" bikes and not the heavier eBikes, then this rack is perfect. I wanted a hitch rack that was user friendly and not overly complicated. I have a mixed bag of bikes and this rack can handle them all, from mountain bikes, street bikes, and BMX bikes. I like that this rack comes with an adapter piece for 20"-24" wheels. Assembly of the Kuat Sherpa 2.0 is really a no-brainer. I think it's only 4-5 bolts really. Everything else is ready to go. The anti-rattle hitch ball mechanism is simple to use with just a twist of the dial, easy. The tilt pedal/lever is also easy to access should you need to open your hatch, a solid "click" assures it's in place. So far, loving this rack. Fit and finish is superb. Thanks to Jerred and etrailer for answering my questions, always helpful.

Click to Enlarge

Click to Enlarge

OMG!! I have been researching and pricing bike racks for a month. Every time I thought I was ready to pull the trigger, I have a question or review that through me off the trail. I was ready to purchase the rack from outdoor retail store and drive 2 hours to pick it up from store to save the $75 shipping, when I thought about etrailer that I had used when I had a travel trailer. Checked them out, they had the exact rack I decided to buy, with $[XX] discount and free shipping. Life doesn’t get any better. It was delivered right on time and in great shape. BTW etrailers website description and videos were better than the racks manufacturer site. You are Rock Stars in my book. Overall, start to finish was above and beyond expectations.

Click to Enlarge

Click to Enlarge

I purchased this bike rack a year ago and I use it A LOT. I had to buy and install a stabilizer because without it, the unit would sway back and forth even without a bike on it (very noisy). This makes removal more cumbersome but since I keep the hitch on year round it doesn't matter to me. The tilting function is fabulous allowing easy use of my RAV4 hatchback. I can even tilt it down with a bike on it. I got the 2 bike hitch. Plenty of room for two bikes to fit without rubbing. Lastly, the hitch has a sizable through-hole on the bottom to thread a good sized cable so I can lock my bike up. Sturdy. I highly recommend.

The unit ‘s simplicity is a real plus. It takes less than 3 minutes to put the rack on the vehicle. It is well built and very durable and has a nice feature that allows you to open the rear hatch for SUV owners without removing the rack.

This two bike rack has been great for the occasional bike ride outside of our home area. I like the sturdy construction, but beware that it is a little heavier than it looks (I’m retired and a bit older so maybe not as strong). Easy to fit into the factory trailer hitch on our 5 passenger SUV and no problem securing the bikes for transport. My only complaint is, the stick on Yakima Graphic started coming apart the day we got it. Sorry, no free advertising for Yakima.

I used this product twice to go back and forth on a 700 mile trip (1400 miles total). My initial impression was that it was sturdy because it was larger than most 2 bike carriers I've seen. The strapping system is convenient and the locking system worked great. The only flaw so far is that one of the locking mechanisms actually broke off. After closer inspection, I realized that the parts are plastic. I'm not sure what actually caused it to break other than the force of hitting a pothole causing the bike to bounce on the rack. Those types of forces should be expected with normal driving however and I expected the locking mechanism to hold up. I was fairly disappointed that it happened given the asking price and the reviews I read prior to my purchase. Other than the locking mechanism on the actual bike rack, I wouldn't put to much faith in the red handled locking pin that inserts into the trailer hitch and insertion bar portion of the bike rack. It is understood that the pin does not go all the way through the insertion bar as the locking mechanism is inside and prevents further advancement. Yakima could probably improve this aspect of the product. I will be contacting Yakima to see if they will replace the broken part. One thing I did notice was that the broken bracket is screwed in and can be removed/replaced fairly easily. I have included pics of the broken bracket and working bracket for comparison. Hope this helps in your decision!

Click to Enlarge

Click to Enlarge