# 1
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
I've had this installed for a almost a year, and it works great. I added the 4" off-set ball because I have a short-bed F-150 truck, and the off-set centers the weight above the axel. I like the B&W design, because the receiver is a square, and minimizes rattle. There are cheaper options, but they don't have the square interface. The added cost is well worth the additional security. I have comfortably towed at the 10,000 lbs limit of my truck, and have accumulated more than 1,000 miles over the last year.
2011 f150 ext. cab 6.5’ bed. - fit great, instructions were clear and well marked. No need to remove the bed for install! Sturdily made product, very happy with mine.
# 2
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
2014 F150 Wow, what can I say, this is an extremely solid, well built unit. I knew it was about 90 pound, but when you take it out of the boxes the quality really hits you. Everything fits just as it is supposed to. The bolts are all Grade 8, and when you get everything torqued you know this unit is truly part of the truck frame. Maybe a little over kill for our 5500# Escape 5.0 TA, but I wanted that confidence while connected, and I got it. Coupled this with the Anderson Ultimate Hitch in Black Out and couldn't be happier.
Product was shipped and received within time frame given. Installed nicely, within 3 hours. Had to pry up truck bed, dented from hauling to get hitch in, and hole-saw walked a bit on me, but other than that good install.
# 3
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Great hitch! I put this on my 2021 F-150 LB to tow our 10k lb fifth wheel and it worked exceptionally. I love how the ball can hide away to let you use the full bed for other things. Took about two hours to install, including cutting the holes and painting them. You'll want two people for this install. I paired this with an Anderson Ultimate Connection gooseneck hitch and Roadmaster Active Suspension system and my little 3.5l V6 1/2 ton towed this trailer with ease.
The hitch is great, the directions were easy to follow and was an easy install.
# 4
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Unit installed and pulled my fifth wheel to provincetowne Mass. Unhooked and pulled the ball out and picked up some firewood. Nice flat surface. Love it. Only way to go.
Great value and durability. Self install in about 3 hours and has remained solid since then. Put in about 10k miles towing a 31 foot trailer with it.
# 5
Curt Above-Bed Gooseneck Trailer Hitch for Fifth Wheel Rails - 3" Offset - 25,000 lbs
I was looking for a way to shift my 5 th Wheel gooseneck hitch back b/c it was hitting my toolbox. Because I had a Ford with the factory installed hitch this was the only option. R Trailer walked me through what I needed and it worked great!
Delivery was prompt. Curt brand is quality!! Installed today with minimal effort. Can’t wait to try it out.
# 6
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
I purchased this to pull a 25Ton GN trailer with heavy equipment and so far it works great! Good price point and reliable product. I would highly recommend this product and trailer. Thank you!
Can’t go wrong with B&W hitches , install is straight forward everything fit perfect and etrailer ships fast with great customer service. Best hitch on the market as far as I’m concerned and quality is excellent, I have towed heavy and never worry about my hitch. I do add some of the blue loctite to my bolts before installation just for peace of mind.
# 7
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Your product has met all of my expectations. It fit my truck as you said it would. I am going to pull a fifth wheel with it.
Very good service and parts fit perfect , Thank for your help
# 8
Curt Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails, 25,000 lbs GTW
Had to hit one of my rails with a 2 lb sledge just a fuzz to let the tab drop in. The locking tabs are a good idea for the pins. I put my late grandfather’s old classic padlock from his jon boat on one of the tabs. A little nostalgia.
Well built heavy duty fit into the fifth wheel rail with no issue thanks
# 9
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Works great, haven't had any issues with it. Easy to install.
This is my second hitch from y’all. Outstanding service
# 10
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Difficult to determine installation ease, as I had the bed off my truck while installing. That made it very easy, but instructions were good and its a straightforward process. Very well made, and fit precisely on my truck. I think the B&W system is very tough to beat. Solid and dependable. And their after sale customer service is excellent.
Great service and a great product! Quick delivery and good communication regarding status. Of course it’s a great hitch, it’s a B&W…
# 11
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
I like the hitch but when ai am pulling my trailers, and I am moving them around at low speeds it seems that there is a good amount of movement in the hitch and the feel in the truck. I’m not sure what that is but I have used trucks that didn’t have that feel in them but mine definitely does. We followed all directions and torqued all bolts to the required amount. Maybe someone can shed some light on what that maybe. Thanks
The kit arrived in two days. The quality is very good. All the parts fit as described. We were able to install it in a few hours without a lift. We plan on pulling a 14,000 # trailer to move farm equipment. This trailer will replace an old 12,000# pintle hitch trailer. I would definitely recommend this kit to others.
# 12
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Excellent hitch for maintaining full access to your bed when you aren’t towing. Solo installation took about one afternoon. I recommend using a hole saw for the 4 inch big hole and a step drill for the safety chain bolts. The hitch bolted to existing factory holes in the frame as advertised. I was impressed that I could still buy something that fit like this for my 1995 F-250.
1997 ford f250 Works great, except the turnover part, the ball hits the sway bar. Install was not as easy as stated but that's probably because the kit was more of a universal fit for my truck and I had to do a lot of drilling.
# 13
Reese Elite Series Pop-In Ball Kit for Ford Super Duty and Nissan Titan XD Under-Bed Gooseneck Hitch
Unfortunately I'm not very happy with the service. I ordered a item from your website and it premised delivered on one date and I received it 4 days after that.. I needed on the date it was promised. I called the company and basically I was told, sorry. You can pay for it to be sent back.. So now it just sits in garage, cause I found another one at a trailer store, cause I was in need of it. Also, the box it came in was all torn up and taped together.
The hitch worked out perfectly, The chain pucks are a little small for some chain hooks, there rating is fine but to safety hooks for the rating of the fifth wheel would not fit in the holes, so I was forced to use hooks with the less rating, put 20000 miles on the ball and it was fine.
# 14
Remov-A-Ball Gooseneck Trailer Hitch with Custom Installation Kit - 30,000 lbs
great company. order shipped extremely fast, had a problem with ups losing 1 piece but they sent another out as soon as they found out what happened. i cannot give this company enough praise.
# 15
B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs
Came in a timely manner, about a week from the time I ordered it to it delivered to my door step in Alaska. The hitch itself is very high quality with nice clean welds and sharp clean edges which took almost no prep work to weld in to the frame I had built for it. You could tell by looking at this that B&W uses nice welding equipment and employs quality welders. Overall very happy with this. Installed on Monroe flatbed on F-450 cab and chassis truck.
This unit was very handy to be able to purchase and install on my Bradford Built flatbed so that I could install my B&W companion hitch with flatbed base on the truck. The welding was all fairly straight forward and didn't require much except for a few washers and a piece of flat steel for a spacer. The one down side is that the hitch pin/handle does not have any built in twist-n-lock method to lock it so the pin remains disengaged for the ball or companion assembly install like on the common B&W under truck bed assemblies I've had on several trucks. We ended up installing the pin slightly out of line so that the tip of the pin would catch on the exterior of the receiver when pulled out and then when I wanted to engage the pin just push up on the handle and press the pin back in. I do like that I can still cover the hitch hole with the cover plate as seen in the picture.
# 16
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installation was straight forward and it's well built. Works smoothly. etrailer was awesome as usual with shipping and service. However.... ;) on the BWGNRK1400 for '73-'87 GM trucks, the predrilled holes in the hitch for the safety chain u-bolts are 6-1/4" each way from center of the ball. This places the matching holes you have to drill in the truck bed on the sloped edge of the ribs, not in the center of the valley as intended. The instructions read as if the holes are not pre-drilled but they are, so I contacted B&W and asked if I can drill new holes at 8-3/4" each way of the ball so that they center in the next valley and they said no, that will void the warranty. So I had to do some bodywork, cut, weld and grind to scallop the ribs around the anchors to they won't always be sticking up (defeating the flat floor intent of this hitch design). I saw guy on [online] noted this was an issue on his squarebody bed as well. B&W needs to look at this dimension for future installations to help out the next guy.
Great hitch! I'm a pretty avid do it yourselfer so I did the install myself and it was relatively simple. The directions that came with the hitch had all the information I needed. It works well with my trailer and the quality seems to be pretty good. It's pretty low profile while you're not using it as well. Overall very happy with it. A couple of install notes for squarebody Chevy, GMC trucks which is what I installed mine on: You will need to lift the bed off the frame just enough to slide the hitch between the bed floor and the top of the frame rails so if your truck is rusty like mine, you may want to have new bed mount hardware on hand before you start in case you have to cut the old bolts to get them out. Also, the safety chain loops land right on the ridges in the bed floor so they don't recess completely flush even when they're not in use but so far it hasn't been a problem for me. I saw that mentioned in some other reviews on here so I already knew before I bought the hitch.
# 17
Elite Series Under-Bed Gooseneck Complete Hitch
I think this hitch is great, it was kind of hard to tighten the bolts that are for the chain hooks but after a year it has held up great and nothing is loose on it. I haul our 14k equipment trailer multiples times a week and a 22k gooseneck with our backhoe at least once every two weeks in between jobs. I also use it to move our 5th wheel with an attachment and it pulls really smooth. The only thing is the dust covers won’t stay on but it’s fine I just vacuum them.
I love it. Has worked flawlessly since being installed. Install directions were good with step by step instructions that were easy to follow. If there was any one thing I would knock, it would be the boxes were pretty well destroyed when it got delivered, but that is t necessarily etrailer’s doing. Nothing was missing and all parts were individually packaged. Solid, sturdy, well constructed. Highly recommend for anybody wanting to add a puck system/gooseneck ball to there HD GM truck.
# 18
Overall good product. I added 2 pieces of 2x2 (¼" thick) angle iron to the back of the base plate to stiffen up the plate more. I've used it on a 3500 dually pulling fully loaded dumpster trailers with no issues at all.
The box they shipped it in was pretty much destroyed. Several holes in it. Need a smaller box or better packing material than just paper. Plate is warped a little in the middle from the welding of the gooseball plate.
# 19
Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch - 30K
When I placed my order I was given the option of taking a slightly used item for a nice discount. It arrived and looks BRAND NEW! I am happy once again for the quick service and great products from etrailer.
Excellent . I love this whole unit. As a single woman I really appreciate the case to hold the hitch and tie down rings. When I need to use the gooseneck in my truck it's quick and easy to install. When I need the full bed to haul hay and bags of grain, the hitch can be stored away under the back seat in my truck. Very bpkeased with the quality.
# 20
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Got this for our new camper last year. Did the installation myself with a few buddies very straight forward directions. We use a Reese goose box with the curt 4” off set ball on our 08 short bed truck! Would definitely recommend
Great product and perfect fit for my 2005 GMC Sierra duramax. I just purchased a Montana fifth wheel and wanted to still be able to use the bed of the truck without taking a heavy hitch in and out and breaking my back. The hitch arrived really fast and the boxes were in pretty good shape and I was only missing one washer from a torn parts bag. I was able to install the hitch that weekend with help of the directions and how to YouTube video. The only issue I had was that the video stated the crossbar with the notch went to the rear while the directions showed it going to the front. It definitely goes to the front and was pretty obvious when installing it. I didn’t have any real issues with the install and it looks great and hides away nicely leaving a clean flat bed. I look forward to hauling my fifth wheel real soon.
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."