bing tracking image

Best 2012 Dodge Journey Bike Racks

change vehicle


Bike Rack Videos

Yakima SwingDaddy 4 Hitch Bike Rack Review - 2012 Dodge Journey

Today we have a 2012 Dodge Journey and we'll be test fitting the Yakima Swing Daddy four, hitch mounted bike carrier, part number Y02422. To mount our carrier to our vehicle we'll fit the shank of the carrier into our receiver tube of our hitch, line up the hitch pinholes and tighten down the anti-rattle bolt. Now we can look over some clearance measurements. From the furthest point of our bumper to the closest point of the bike rack measures about 5 inches of rear clearance. We've added an overall length of 11 inches to the rear of the vehicle and we've got about 12 inches of ground clearance from the bottom of the rack to the ground. Next we are ready to load our bike.



Yakima StickUp 2 Hitch Bike Rack Review - 2012 Dodge Journey

Today on our 2012 Dodge Journey we are going to be test fitting the Yakima Stickup two, hitch mounted bike carrier, part number Y02420. To mount our carrier to our vehicle we'll insert the shank of the carrier into our hitch. We'll line up the hitch pinholes and tighten down our anti-rattle bolt. Next we'll check for some clearance measurements. From the furthest point of our bumper to the closest part of the bike rack measures four inches. With the bike rack in it's stored position we've added an overall length of 13 inches to the rear of the vehicle.



Yakima Holdup Hitch Bike Rack Review - 2012 Dodge Journey

Today on our 2012 Dodge Journey we are going to be test fitting the Yakima Holdup Two hitch mounted bike carrier, part number Y02433. To mount the carrier to our vehicle we'll fit the shank of the carrier into our receiver hitch, line the hitch pinholes and tighten down our anti-rattle bolt. Now we can check for some clearance measurements. From the furthest part of bumper to the closest part of the bike rack measures 5 inches of rear clearance. We've added an overall length of the vehicle of 13 inches when the bike rack is collapsed. We've got about 12 inches of ground clearance from the bottom of the bike rack to the ground.



Thule Vertex 4 Hitch Bike Rack Review - 2012 Dodge Journey

Today on our 2012 Dodge Journey were going to be test fitting the Thule Vertex four hitch mounted bike carrier part #: TH9029. To mount our bike rack to the vehicle well insert the shank into the receiver tube on our hitch, well line up the hitch pinholes and feed in our anti-rattle bolt and tighten it down with a inch wrench. Once weve done that we can go ahead and check some clearance measurements. From the furthest point of our vehicle to the closest point of the bike rack measures about 8 inches of rear clearance. Weve got about 12 inches of ground clearance from the bottom of the rack to the ground. Next well check for rear vehicle access.



Thule Parkway 2 Hitch Bike Rack Review - 2012 Dodge Journey

Today on our 2012 Dodge Journey we're going to test-fit the Thule Parkway 2 Hitch-mounted bike Carrier, part number TH958. To mount the Parkway up on our vehicle, we'll insert the shank in to the receiver tube of our hitch. We'll line up the hitch pin holes in to the receiver tube of our hitch. We'll line up the hitch pin holes, and we'll start to feed in our anti-rattle bolt. Then we'll tighten it down with our three quarter inch wrench. We'll go ahead and check out some clearance measurements.



Thule Hitching Post Pro Hitch Bike Rack Review - 2012 Dodge Journey

Today we have a 2012 Dodge Journey and we'll be test fitting the Thule Hitching Post Pro hitch mounted bike rack, Part # TH934XTR. To mount the bike rack to our vehicle, we want to insert the shank into the receiver tube of our hitch. We'll line up the hitch pin holes and begin to feed in our anti-rattle bolt. We'll use a 3 quarter inch wrench to tighten it all the way down. Next we'll go over some clearance measurements. From the furthest point of the bumper to the bike rack measures 8 inches.



Thule Apex 4 Swing Hitch Bike Rack Review - 2012 Dodge Journey

Today on our 2012 Dodge Journey, we're going to be test fitting the Thule Apex Swing 4 bike carrier, Part # TH9027. To mount the carrier to our vehicle, we'll insert the shake into the hitch. We'll let the sub-closing pin close and we'll use the handout to tighten down the anti-rattle device. Next, we can give you some clearance measurements. From the furthest part of our bumper to the closest part of our bike rack measures 5 inches of rear clearance. We added an overall length of 13 inches to the rear of our vehicle.



Rhode Gear Highway Hitch Bike Rack Review - 2012 Dodge Journey

Today we have with us the 2012 Dodge Journey and we'll be test fitting the Rhodegear Highway 2 bike carrier, Part # RG8015220. To mount the bike carrier to our vehicle, we'll want to insert the shank into the receiver tube on our hitch. We'll line up the hitch pin holes, feed our anti-rattle bolt in and tighten it down with a 3 quarter inch wrench. From the furthest point of our bumper to the bike rack upright measures 8 inches of rear clearance. From the rear of the vehicle to the farthest point of the bike carrier, we've added about 25 inches of overall length. And our ground clearance measures 11 inches from the bottom of the carrier to the ground.



Kuat Sherpa Hitch Bike Rack Review - 2012 Dodge Journey

Today on our 2012 Dodge Journey, we're going to be test fitting the Kuat Sherpa 2 bike carrier, Part # S102. To mount our bike carrier, we'll fit it into the hitch and line up the hitch pin hole. We'll use the hand knob at the end of the shank to tighten the anti-rattle device. Once weve done that, we can throw our hitch pin in place and secure it with a lock. There's about 2 1/2 inches of clearance from the farthest part of the bumper to the closet part of the bike rack. And that adds about 15 inches of overall length to our vehicle and it has ground clearance from the bottom of the shank to ground of about 12 inches.



Thule Doubletrack Hitch Bike Rack Review - 2012 Dodge Journey

Today on our 2012 Dodge Journey, we're going to be test fitting the Thule Doubletrack Hitch Mounted Bike Carrier, part number TH990XT. To mount our bike rack to our vehicle, we're going to insert the shank into the receiver tube on our hitch. We'll line up the hitch pin holes then we'll insert our anti-rattle bolt and tighten it down with a wrench. Next, we can give you some clearance measurements. From the furthest point of the bumper to the closest point of the bike rack measures 4 inches of rear clearance. We've added about a total of 11 inches of overall length to our vehicle.



Thule Apex 4 Hitch Bike Rack Review - 2012 Dodge Journey

Today, we have a 2012 Dodge Journey and we'll be test fitting the Thule Apex 4 Hitch Mounted Bike Carrier, part number TH9025. To mount the carrier to the hitch, we'll insert the shank and let our automatic pin snap into the hitch pin hole. Once the pin is in place, we can use the anti-rattle knob and tighten it down to secure the bike rack inside the hitch. Next, we'll go over some clearance measurements. From the furthest point of the bumper to the closest point of the bike rack measures 8-1/2 inches. We also have about 13 inches of ground clearance from the bottom of the bike rack to the ground.



Swagman Titan Hitch Bike Rack Review - 2012 Dodge Journey

Today on our 2012 Dodge Journey, we're going to be test fitting the Swagman Titan 4 Hitch Mounted Bike Carrier, part number S63410. To mount our bike carrier to the vehicle, we'll insert the shank into the receiver tube on our hitch. We'll line up the hitch pin holes, feed our anti-rattle bolt in and tighten it down. With that done, we'll take some clearance measurements. From the furthest point of the bumper to the closest point of our bike rack measures 10 inches of rear clearance. We've added an overall length of 21 inches to our vehicle and we have 14-3/4 inches of ground clearance from the bottom of the bike rack to the ground.



SportRack EZ Hitch Bike Rack Review - 2012 Dodge Journey

Today on our 2012 Dodge Journey, we're going to be test fitting the SportRack 2 Hitch Mounted Bike Carrier, part number A30901. To mount the bike carrier on our vehicle, we'll insert the shank into the receiver tube. We'll feed in our anti-rattle bolt and tighten it down with a 3/4-inch wrench. Next, we'll take some clearance measurements. From the furthest part of the bumper to the bike rack measures 9 inches. We've added an overall length of 26 inches to the rear of our vehicle and ground clearance from the bottom of the rack to the ground measures 15 inches.



SportRack Escape 3 Hitch Bike Rack Review - 2012 Dodge Journey

Today on our 2012 Dodge Journey, we'll be test fitting the SportRack Escape 3 Hitch Mounted Bike Carrier, part number A30403. To mount the bike carrier to our vehicle, we'll insert the shank of the carrier into the receiver tube. We'll line up the hitch pin holes, feed our anti-rattle bolt through and tighten it down. With that, our bike rack is all mounted to our vehicle. From the furthest point of our bumper to the closest point on our upright of the bike carrier measures 8 inches of rear clearance. From the bottom of the bike carrier to the ground measures about 12 inches of ground clearance.





2012 Dodge Journey Bike Rack Questions