Best 2010 GMC Sierra Front Receiver Hitches

This product was installed on my 2003 GMC Sierra 2500 HD pickup. The install took me approximately 15-20 minutes using a floor jack and a battery operated impact driver. No modifications to the bumper fascia were needed, nor was it necessary to remove the factory tow hooks. Although it has not been tested, the build quality seems very well made and capable of performing my intended use, which is to mount a motorcycle carrier and dirtbike. The position of the receiver is rather low (approximately 11.5” from the floor on my stock truck with 265/75/16 BFG AT’s), which may make the approach on steep driveways/berms difficult with a motorcycle carrier mounted. A receiver hitch riser may alleviate this concern, however. Untested, I would opine that this tow hitch will more than meet its intended use for me and would strongly recommend this product for its build quality and ease of installation.

Click to Enlarge

Hitch arrived in excellent shape on the expected date. It installed easily on my 2004 GMC Sierra 2500 HD and fit exactly as etrailer said it would. Great job...

Overall, my experience with etrailer was good. There was an initial delay in shipping, but once I talked to someone, everything went well. The help page was invaluable. The biggest help was the installation video. While there are slight differences between the 2011 GMC and the 2013, the process was the same. I am very pleased with the product and the support. Picture attached.

Click to Enlarge

Great product! Super easy to install! This makes my winch twice as versatile. Thanks for a design that leaves the tow hooks in the truck!

Click to Enlarge

Click to Enlarge

The questions that you answer about what truck you have do not get all the way to the correct model. So then when you scroll through the available products, it is showing products for different models that dont apply to your truck(like the 1500, 2500, 3500 etc). However, you dont realize this as you just finished putting in the inputs for your vehicles and then of course assume that the list they give you of available products would only include your vehicle since they say "confirmed fit" for your model. They sent me the hitch for the gmc sierra 1500, which does not fit my 2500 GMC and then want me to pay the $50 to send it back. It seems like the designers of the website should have finished the job before they went to lunch. Now I am out the money.

I ordered both the front and rear Curt class 3 hitches for my 2008 Gm sierra. The factory rear hitch had rusted from the inside and had split all the way across. This new hitch is a lot more heavy duty , with thicker metal and the ends are sealed to keep water out. I liked it so much , I ordered this front hitch to use our bicycle rack on front when we pull our camper . Did not know how to carry our bikes until I ran across this hitch on Trailer. I think it will solve our problem . Thanks etrailer !!! Also had best price, got free shipping, prompt service, and excellent customer service !! Will definitely order from them again !!!

This is the second hitch I've ordered for my truck. This hitch was very easy to install on the front of my GMC Sierra and is almost unnoticeable, which I like. I use it to transport a small Honda Trail 90 motorcycle, and it's 9000lb rating is well above what I am asking it to do. It arrived via UPS several days after ordering, was in good shape, and only took ten minutes to install with only two different size socket wrenches. Highly recommend this unit for the front of any truck.

Click to Enlarge

The Front Mount Hitch is very solid, well built and fits like a glove, no truck modifications required. I installed it on my '04 GMC Sierra Dually to make storing the boat in the "Toy Box" much easier. I was previously backing the Triple Axial Trailer about 700 feet from the street to the "Box" between a 2 foot tall rock planter box and Avocado trees. Truck mirrors were not adequate and spousal help created too much frustration so I bought the hitch

This hitch was very easy to install....I had to trim the lower air dam to fit around the receiver and that gives it a clean neat look. I didn't like that I had to remove and leave the shields around the tow hooks off. But overall I'm very pleased. I plan to use this hitch for maneuvering a camper in a narrow spot beside my home, and for a bike rack when towing a camper.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Perfect fit, quick and easy installation. Only took 25 minutes by myself. I would highly recommend this hitch. Plan using it for bike hitch, winch, cargo platform, etc.

Click to Enlarge

Easy to install works perfect on my gmc to haul small scooter

This Curt 31109 front hitch went on a 2009 GMC 2500 Sierra crew cab with a Duramax Diesel. Shipping was incredibly fast - just 1 day! The hitch appears well built and nicely finished - and it's made right here in the USA! It fit perfectly and was very easy to install. No trimming of bumper plastic was required. My wife and I are retired and we use this truck to pull a large 5th wheel trailer or carry a truck camper. We will transporting our bicycles on the front hitch. I should have done this earlier.

Front hitch Installed easily and fit my Sierra 1500 perfectly. Fast shipping and friendly service. I'll buy from etrailer again!

The "no drill" aspect is really nice. The wire bolt guides are a huge helper. The instructions are very good except for detailing where to cut the trim. This lead to me cutting more than I would have needed to. That part was not good. I recommend having vehicle up on ramps and then using a car jack to support weight of the hitch as it is quite heavy to hold up as you begin to assemble to the frame.

Click to Enlarge

Click to Enlarge

Very easy to insall and you can't hardly see it sticking out the front of my truck.

Click to Enlarge

Great product and great delivery time.

Quality hitch and the excellent service all the way around I'm used to getting from etrailer over the years. Installed on my 2016 Sierra Denali 2500HD, note instructions say on first line down that it does not fit the Denali trim due to extensive fascia cutting required; actually it was quite simple with the aid of a 4-1/2" cutoff disk and a sawzall. Installation is much easier with two people. See attached pics for actual material removed, note the lower fascia need not be cut for the hitch to fit through the hole. Maybe more work to install than the Curt hitch, but well worth the additional ground clearance.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Got the front mount hitch 65078 on time. Installed the next day. Installed in less that 2 hours on my 2013 GMC Sierra 2500. Was a perfect but very close/tight fit. Some bolts were a challenge to get in but all went in without any modifications.

Click to Enlarge

Click to Enlarge

Product is great! Exceeds my expectations for ease of installation and performance. I removed the 3” spoiler completely vs cutting for hitch. The key is to “dry fit” in place and use a metal punch to mark all your drill holes. Wire bolt feeder worked great for installing bolts. I used the hitch to mount my eight pole rod & cooler holder for surf fishing.

Click to Enlarge

Super fast shipping,but could use better packing.Hitch actually made a large hole in box,UPS driver had me check to see if anything was missing.Easy install,but try finding a 17/32" bit. After seeing how big the front opening is I just used a 1/2" bit. I think it took longer to remove, trim and reinstall the front spoiler than the rest of the job. Looks great installed

Click to Enlarge

Just what I was looking for. Thank you.

I ordered these two, front and rear for a 1990 GEO Tracker 4 wheel drive that I am rebuilding. I believed they would fit, I finally got around to mounting them and they don't fit, to large. I think I have had them to long to return them.

Great products, great prices, fast shipping and a great company to do business with. Easy install, and it took longer to trim the air dam than installing the hitch.

Click to Enlarge

Click to Enlarge

Terrible, they sent the wrong hitch and now want me to pay shipping for the return

The Curt hitch assembly arrived in excellent condition. As usual, George did a fantastic job of getting my order to me very promptly. The installation went perfectly and exactly as shown in the video on the etrailer.com website. The front hitch fit was perfect on my 2015 GMC Sierra.

This product is super easy install (took me less than 20 minutes all by myself). No cutting or drilling required. The product also works great. This makes backing a trailer into a tight spot much easier. The only down fall of this product is that it has to drop down pretty close to the ground to clear the lower air dam on the Sierra 2500HD. The remaining ground clearance leaves the hitch low enough to hit the ground when pulling up to tall curbs or parking blocks and would also likely hit ground fairly easily while four wheeling. The low ground clearance is the only reason I gave this four stars instead of five stars. Please note that to get a front hitch that is no cutting or drilling, there is no other option...it has to be below the air dam.

Needed a front hitch for a 2006 Ridgeline Honda truck. I found it on etrailer.com and a better price for same hitch on another online store. As I talked with the customer service agent, I was also offered a discount which was quite a surprise. Shipping was very fast. Had it installed on my truck so I could attach a mounting hitch and snow blade. I am extremely happy with this hitch and etrailer.com.

We live just south of Buffalo and Put this on our '11 Honda Ridgeline with a snowsport plow and a week later it snowed, and snowed and snowed... 5 feet in 24 hours and it's still snowing.... It's not good.... It's AWESOME! Not one driveway or even our street is clear... Except ours. It was easy to put together , easy to install and works exactly like it's advertised! It's November and it paid for itself already. Communication with etrailer was exceptional. We could not be happier with the whole setup.

Click to Enlarge

I bought this receiver to add front mounted 'accessories' on my 2007 Jeep Wrangler Unlimited Sahara. I plan on using this to add an extra bicycle rack, a cargo basket, a receiver mounted winch or other 'accessories' needed for my Jeep when I take my family camping. It will also be useful for "front launching" a boat or parking a trailer in tight spots. It took me about an hour to install, although I had already previously removed the lower wind deflector cowling, so did not have to spend time removing it or cutting it for a finished look. Detaching and moving the top trim panel between the grill and the bumper is a must to facilitate the installation. The receiver fits pretty close, although you do have to manipulate it to get the holes to line up with the frame. Follow the instructions and do not tighten any of the bolts until you get it lined up and all the bolts in loosely, then torque it down. As noted in the instruction sheet, the driver's side of the receiver does not sit flush against the frame, there is about a 1/4" to 5/8" gap. The instructions say to use the extra split washers (in the kit) as filler, but they would just rattle around loose in there and provide any benefit, so I omitted them. Once tightened down, the receiver tube was not parallel to the ground, it is slightly higher in the front, sloping towards the rear. It is not off enough to affect my intended use, but may be bothersome to those with type 'A' attention to detail. Overall a good product that will add a lot of flexibility to my Jeep~

Click to Enlarge

Click to Enlarge

Click to Enlarge

Relatively easy install. Just have to be mechanically inclined. We use the hitch to carry a fish rack/cooler on a 2011 Jeep Wrangler. So far so good.

I chose Draw-tite because they are built very well and this one is no different. The welds are done well and I have no fear that this product will serve me well. The install wasnt to bad for a DIY type like me and the fit was excellent, only took a few hours. Knowing that I can now be pulled out of a bad situation or pull someone else out is comforting with the help of a hitch mounted winch. The Price was right and etrailer shipped it out fast although packing could use a smaller box . Oh yeah, UPS sure tested the toughness of this receiver ! . Great product and great service from etrailer

Click to Enlarge

im very satisfied with my front receiver. ive used it as a recovery point,to move trailers, and as a mount for bike rack and cargo holder. if i had a winch platethat would be very handy too. etrailerhad a fair price, quick shipping, and overall great customer service. i would use them again andrecommend to a friend as well.

Fit nice. I haven't used it to move a trailer yet. I didn't have tow hooks and the factory ones are high so I paid the extra to get the hitch instead.

The product itself is great. One star deducted because 1) the wrong installation manual was provided. Credit to etrailer because once I notified them, they sent me the correct one within 24 hours. 2) A tremendously oversized box was used for shipping. Consequently , the item which is heavy as you would expect shifted during shipping and caused a huge hole in the box. Fortunately, the bolts were bagged and taped well to the item but this does give a slight passibility that the bolts could be lost in shipping.

Fits perfect and works just as I needed it to. I use it for my SnowSport plow set-up on a 2022 Gladiator Sport Max Tow. I’ve been using front receivers for this same plow for the last 24 years. It’s been used on 5 different trucks and this front receiver mount plow is the BEST. *** When installing on a Gladiator(possibly the Wrangler as well), the front plastic trim below the bumper needs to be cut for receiver clearance. I wanted a tight and “factory looking” install, so I took my time with a vibrating cutter and very sharp utility knife. After trying to put it back in place, the hole is not just square, it’s shaped more like. “T”. I suggest you make small adjustments/cuts as you go forward. It may take several times fitting and cutting to get it right and tight, but in the end it does look like it came that way from JEEP. On the Max Tow package, there is also a metal skid plate that does not get reinstalled. Unfortunately that piece is where the back of the plastic fascia mounts. I ended up securing it with some long heavy-duty zip-ties and it’s worked well for a year now. Just an FYI for those installing the same receiver on their same vehicle.

Click to Enlarge

Click to Enlarge

Installed real easy. Cuttingbthe plastic rock guard was the hardest part.

Click to Enlarge

Click to Enlarge

Very easy to install. works great for bike rack and generator box.

After struggling with the answering menu, Steve Z. was instrumental in locating a hitch to fit my van which was not specifically identified in any data search. Weird year, 2005, of popular Chevy Express van, my luck! Using manufacturers dimensions I purchased #31016 on 12/21 and it arrived on 12/24. It's a very well built, USA built, unit. It arrived rapidly, but was missing half of the mounting hardware. The remainder of the hardware was rolling around in the box. Zip lock baggie ripped apart spilling them. I used a hydraulic jack to elevate hitch into place, and an additional jack to push the drill up to drill the 6 mounting holes necessary. No factory hole alignment. All the nuts for the bolts were lost in transit, but by a Christmas day miracle, I found 2 metric nuts to fit supplied bolts that survived the delivery. I will acquire, and install remaining missing 4 tomorrow. The installation went smooth and easy using this technique. It took around 3 hours with much of the time searching for hardware.' Thanks Steve Z. and etrailer. .

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This was one of the easiest accessories I’ve installed on my Tundra. It is a front receiver hitch so I don’t use it very often. Mostly just for bike racks when towing a trailer, but when you need it you need it.

Straight forward and perfect fit on my 2008 Toyota Tundra!!

Click to Enlarge

Click to Enlarge