bing tracking image

Best 2010 Ford Flex Bike Racks

change vehicle


Bike Rack Videos

Thule Domestique Roof Bike Rack Review - 2010 Ford Flex

Today on our 2010 Ford Flex, we'll be test fitting the Thule Domestique roof-mounted bike carrier, part number TH513. We'll begin our test fit by placing the carrier onto the vehicle's crossbars. We'll loosen up the Allen bolts on the rear bracket, as well as the Allen bolts at the head of the carrier, to bring both brackets around the underside of the front and rear crossbar. Once we've positioned the brackets over the crossbars, we'll use the Allen key to tighten down the Allen bolts to secure our Thule Domestique to our Ford Flex. Once everything's tightened down and secured, we're ready to load up our bike. We'll undo the tray strap at the rear of the carrier and double check to make sure the skewer's loose as well.



Swagman Fork Down Roof Bike Rack Review - 2010 Ford Flex

Today on our 2010 Ford Flex, we'll be test fitting the Swagman Fork Down roof-mounted bike carrier, part number S64710. We'll begin our test fit by placing the carrier onto the vehicle's load bars. We'll start at the head of the carrier and slide the silver brackets around the underside of the front load bar. We'll then use the black wing nuts to thread onto the bracket, securing the head of the carrier to the front load bar. We'll then move to the rear load bar. This time, we'll slide the silver bracket through the top of the carrier, down against the edges of the rear load bar.



RockyMounts TieRod Stretch Roof Bike Rack Review - 2010 Ford Flex

Today on our 2010 Ford Flex well be test fitting the RockyMounts Tierod Stretch Roof Mounted Bike Carrier, part number rky1011. Well begin our test fit by placing the carrier on to the vehicles crossbars. Well then remove the black plastic cover at the head of the carrier to bring the rubber-coated steel straps around the underside of the front crossbar. Well then loosen up the Allen bolts at the rear of the carrier to bring the rear bracket around the underside of the rear load bar. Well then tighten down the silver bolt at the head of the carrier tightening the straps to the front load bar. Well then tighten down the Allen bolts at the rear of the carrier for the rear bracket to secure the rear of the carrier to the rear load bar.



Thule Vertex 4 Swing Hitch Bike Rack Review - 2010 Ford Flex

Today on this 2011 ford Flex were going to do a test fit of a Thule bike rack, part number TH9031, the Vertex Swing 4 bike rack. One quick note about this bicycle rack that it is designed for two inch receivers only. Well start off by installing the rack into the hitch. Well tighten down the anti-rattle bolt and then go from there. The bike rack does come with a tool to tighten it down, however a inch wrench may work better in certain applications. Next well give you some measurements that will give you an idea of clearance between the bicycle rack and the bumper and the ground.



Swagman XTC4 Wheel Mount Hitch Bike Rack Review - 2010 Ford Flex

All right, today on this 2010 Ford Flex, we're going to do a test fit of part number S64665 from Swagman. This is the XTC-4 bike rack. Okay one quick note about this bicycle rack that it is designed for 2-inch receivers only. We'll go ahead and install in our hitch, we'll slide an anti-rattle bolt and install a lock on the other side. Now with our bike installed, let's go ahead and give you some measurement that will give you an idea of clearance between the bumper and bike rack and the bike rack and the ground. Looks like bumper clearance is just under half an inch and ground clearance is 11 and 1/4 inches.



Softride Dura Hitch Bike Rack Review - 2010 Ford Flex

Alright, today on this 2010 Ford Flex, were going to do a test fit of part number SR26247 from Softride. This is a Softride Dura Parallelogram Bike Rack. One quick note about this bicycle rack is that will work of 1-1/4-inch receiver hitches, class 2 only, with the included adapter. In this application, we're using a 2-inch receiver. OK, we will start off by installing the bike rack into the hitch. We will tighten down the anti-rattle bolt and then install the lock onto it as well.





2010 Ford Flex Bike Rack Questions