# 1
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
Ball mount kit arrived quickly (within a few days) upon placing order online. Parts were shipped loose in box and bottom flap on box was open when received. Fortunately, all the parts were still in box and in good condition. Kit includes ball mount hardware I need to pull trailers with different hitch heights.
I bought a trailer hitch for 2014 Subaru Forester. I installed the hitch and wiring harness myself in less than an hour. The product matched descriptions perfectly and thanks to the vehicle specific video installation tutorials these products are a breeze to install. Had a great year and attached two bike racks, one ski hitch, and one small trailer with ease also thanks to the accessory ball mount kit.
# 2
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
Very impressed with company keeping constant updates. Product was shipped very quickly. Heavy duty and extremely easy to install, granted I had a friend help and access to a lift. I will definitely be recommending etrailer to my friends.
# 3
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Quality products. The hitch and wiring harness installed easily because of the quality detailed installation videos you provided. I couldn't be happier. I saved $ 300 by doing the installation myself. I plan on using the hitch for a bicycle rack and to pull a motorcyle trailor. Since I don't have a pickup it is really convenient to be able to tow a utility trailor when needed. Thanks etrailer! You have a good thing going. Keep up the good work.
This hitch was installed on my 2015 Subaru Forester 2.5i Limited. The website is fantastic and makes finding the correct products for your vehicle very easy. The hitch arrived in only a few days and came complete with all the necessary installation accessories. The hitch comes with fish wire for the frame bolts so you don't need to fuss with buying fish wire. Some reviews stated that you can go in from the inside of the vehicle but this is totally unnecessary and more work. Just follow the instructions, with exception of the muffler heat shield. You can drill 1/2" holes through the heat shield in the dimpled areas corresponding to where the instructions tell you to cut out the heat shield (see some of the other reviews for more detail on this). These holes allow you to securely fasten the heat shield over the hitch using the hitch bolts. Make sure you have a torque wrench and an 11/16" deep socket to tighten the frame bolts. I would also recommend removing the muffler which is very simple. Lube the muffler mounts with WD-40 to facilitate the removal of the muffler. You will save at least $300 installing this yourself.
# 4
Curt Class II Drawbar - 3/8" Rise, 1" Drop - 7-13/16" Long - 3,500 lbs
Great service, very prompt, with good customer contact and follow-up.
The hitch works great and it was delivered FAST. I was very happy with the purchase. It was cake to install.
# 5
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
It looks tiny compared to other hitches, but is solid metal. The welds are fine and fits like it should. A necessary item for the trailer hitch.
Everything fit perfectly on my 2000 Subaru Forester and is still working a year after installation. I use the trailer every week.
# 6
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
I purchased a Curt class II hitch for my wifes subaru. I recieved it right away and the installation was a breeze. There was a simple little piece of two sided tape missing from the light wire kit. I called etrailer and George sent it to me that day. Service after the sale is what makes a good company great. I couldn't be happier. Thanks alot etrailer!
This trailer hitch was easy to install. I am eighty six years and a disabled Vet. I took my time and had it on in one and half hours. I also installed the heat deflector back on. I think this heat deflector should be reinstalled as the muffler creates a lot of heat. Saved a lot of money also as the dealer here wanted $500.00 for the hitch $60.00 for the wiring and half day to install. Thought he had a sucker but I didn't bite. Thanks much George J
# 7
Draw Tite Drawbar for 1-1/4" Hitch - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 3.5K
Every Item I have ordered from etrailer.com has been top of the line . Easy ordering , prompt service , and excellent installment instructions . I watch the video , more than once , and follow the expert's direction . I wouldnt order trailer parts anywhere else . Thank You
I believe my choice, with the help of etrailer, of this Draw-Tite trailer hitch receiver, along with a few other items to go with it, such as the drawbar, hitch ball and wiring harness, was a good one for my 2017 Subaru Forester. I also have to compliment etrailer for their excellent video on how to install it. All together, it really made the purchase very easy and smooth. Thanks etrailer.
# 8
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
This got installed on my wife's Forester and we have used it several times for pulling a utility trailer and also for pulling our dock and raft at our camp. Very happy with the options it offers for moving more than fits in the car. Since the Forester had the dual exhaust, i did cheat and have my mechanic do the install. He did it within the hour that is advertised, but did say it would have been a bit of a challenge working at ground level. I think I still ended up paying less in total than going to a hitch installer overall, very happy with the hitch, wiring harness, and drawbar. It's especially nice to have the harness tucked away, as it doesn't get used that often.
Item was as stated and fit receiver perfectly. I used this to get my 30 year old tilt bed trailer to the correct height for my Subaru, as I no longer have a pickup truck.
# 9
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Needed to pull a 5x8 trailer with a 22 forester. This ball mount had the perfect rise to brink the hitch ball to 18 & 3/4” at the center of the ball.
Great hitch for a reasonable price. Easy to install and works like it should
# 10
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
GREAT PRODUCT, FITS MY CAR PERFECT.
Got what I ordered !!
# 11
Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs
# 12
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
The 5" rise works very well on an '07 Subaru Forester to level out a utility trailer with 12" wheels. Shipping was prompt as well.
Well made, heavy duty hitch. Fit the Curt hitch on my 2007 Forester perfectly.
# 13
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
This drawbar was clearly used. See the picture. I asked etrailer about it and sent this picture but the person that replied, Noah, thought it must have been bumped around in shipping. If shipping caused this much damage, it's a poor quality product. If it was, in fact, used, then etrailer lied to me. Either way...not good.
Perfect hitch for my 2015 Subaru Forester. Put the ball in the right place!
# 14
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
I installed the trailer wiring and a friend helped install the hitch. Etrailer website is excellent. I got the right items on time and the fit is better than my wife’s dealer installed hitch. Videos on the etrailer site are clear and correct. One caveat, don’t try installing the hitch without at least one other person and having a way to lift the car(we used ramps) is a great help. The only possible way etrailer could be any more helpful is if they could recruit some local shops that would be willing to do the installation. I especially like having my wiring in the passenger compartment when not in use. It keeps it out of the Salt here in the northeast.
# 15
Curt Class II Euro Style Drawbar with 2" Ball - 2-3/4" Rise - 3,500 lbs
I like that this design keeps trailers level rather than pitched forward for my 2007 Subaru Forester. Seems incredibly strong because of its weight and being one piece.
This hitch has worked perfectly on my Subaru for over a year now. Last summer I pulled my tear drop trailer around the country with no problems and the finish on the hitch still looks like new. I would recommend this hitch to a friend.
# 16
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
Item shipped fast and exactly as described. No hesitation in ordering again from this company. Thanks.
The 5" rise works very well on an '07 Subaru Forester to level out a utility trailer with 12" wheels. Shipping was prompt as well.
# 17
Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
This hitch has worked perfectly on my Subaru for over a year now. Last summer I pulled my tear drop trailer around the country with no problems and the finish on the hitch still looks like new. I would recommend this hitch to a friend.
I like that this design keeps trailers level rather than pitched forward for my 2007 Subaru Forester. Seems incredibly strong because of its weight and being one piece.
# 18
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K
I installed the trailer wiring and a friend helped install the hitch. Etrailer website is excellent. I got the right items on time and the fit is better than my wife’s dealer installed hitch. Videos on the etrailer site are clear and correct. One caveat, don’t try installing the hitch without at least one other person and having a way to lift the car(we used ramps) is a great help. The only possible way etrailer could be any more helpful is if they could recruit some local shops that would be willing to do the installation. I especially like having my wiring in the passenger compartment when not in use. It keeps it out of the Salt here in the northeast.
This drawbar was clearly used. See the picture. I asked etrailer about it and sent this picture but the person that replied, Noah, thought it must have been bumped around in shipping. If shipping caused this much damage, it's a poor quality product. If it was, in fact, used, then etrailer lied to me. Either way...not good.
# 19
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 20
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
The 5" rise works very well on an '07 Subaru Forester to level out a utility trailer with 12" wheels. Shipping was prompt as well.
This got installed on my wife's Forester and we have used it several times for pulling a utility trailer and also for pulling our dock and raft at our camp. Very happy with the options it offers for moving more than fits in the car. Since the Forester had the dual exhaust, i did cheat and have my mechanic do the install. He did it within the hour that is advertised, but did say it would have been a bit of a challenge working at ground level. I think I still ended up paying less in total than going to a hitch installer overall, very happy with the hitch, wiring harness, and drawbar. It's especially nice to have the harness tucked away, as it doesn't get used that often.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."