# 1
Curt Q24 5th Wheel Trailer Hitch - Dual Jaw - 24,000 lbs
2005 Dodge Quad Cab Dully , Cedar Creek 36 ckts 16k very nice hitch , shipped relay fast 3 days to east coast, easy to install : had rails from old hitch, it did come a LITTLE scratched up from shipping . one thing i wish it had more height / it does sit lower than old hitch buy 1 inch. haven't tried pulling yet / will up date latter . hope it pulls as good as it looks. now no problem for bigger trailer, i hope! maybe a toy hauler?
I purchased a higher rated (weight) Curt hitch to prevent 'rolling' forward during hard stops. The new hitch far exceeds my trailer weight but I continue to have the problem, although not as often. I had the new hitch professionally installed.
# 2
Curt Q25 5th Wheel Trailer Hitch - Dual Jaw - 25,000 lbs
I have ran a cheap competitor hitch for several years. A manufacturing defect (welded pivot pin) caused the hitch to fail and resulted in 18000$ damage to my truck and trailer. I chose the Curt 25000# hitch after much research and found it to be very well made and clearly shows when it is properly coupled. It is quiet and operates with minimal klunking and chunking going down the road. Overall I am very pleased.
Mounted this hitch on my flatbed 3500 Ram and the hitch works flawlessly. Pull 44' tri-axle weighing in at 23,000# with ease. Very easy to use and understand, very easy to maintain.
# 3
B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs
From the start,the folks at etrailer were very courteous and helpful. I called many times during the decision making process and everyone was always right there to help. When I finally decided to purchase the B&W 18K Patriot w/slider Bailey was there to help with the order. She explained the free freight shipping and it was a done deal. It arrived 1 day earlier than stated, as soon as I opened the cartons it was in fact the good ol' American made quality I was accustomed to growing up. I proceeded to install on the B&W rails I purchased and installed locally on my 2022 F250 Lariat/ Tremor.I had a small hick- up with the install and etrailer gave me B&W's # as they like to handle issues themselves. Stephanie at B&W was just as courteous. Overall a very pleasant experience. The Patriot was basically plug and play. I then connected my 2021 Grand Design 303RLS Reflection and rolled down yhe road. What a smooth and quiet ride, loved it! I would definitely recommend etrailer and their products. Thank you all that helped.
So far so good. Hitch appears to be good quality. It was easy to install after installing the mounting kit. I haven't used it yet so I can't comment on how it handles when pulling a camper.
# 4
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs
Demco auto slide hitch works very well with my crew cab short bed Ram. Fits under my tonneau cover nicely. Trouble free thus far. Had to purchase a Demco plate for the camper to make the Rhino box hitch work. etrailer personnel were great in helping ensure I had the right products and kept me well informed of shipping dates.
My wife and I are full-time RVers, and have used this slider hitch from the get-go while traveling around seeing the country over the past year. We are happy with our purchase, which has proven to be both easy to hook up, adjust, and functions well, as advertised. The only matter I think you may want to address are the thick plastic removable maintenance access covers which tend to bow, and the areas around the attachment holes have melted, in the hot weather. Perhaps instead using a light metal for the covers would be better solution. We are very happy overall with this hitch, and plan to keep it . Thank you.
# 5
Curt Q20 5th Wheel Trailer Hitch - Dual Jaw - 20,000 lbs
I bought a new trailer recently that weighs 16k and I just didn't feel secure using my Reese pro series 16k to Haul with. So I started looking at various hitches. I've had 3 other fifth wheel hitches in the past. All of them have been 15 and 16k models. What I never liked was the latching system. I've even had a trailer come out of the hitch due to a poor latching hook up. There wasn't an good way to lock the hitch. Some of it was my fault and some was a poor design. When I saw the Curt Q20 had a latch on the handle and also was color coded I was hooked. This hitch satisfied my want list. It arrived 4 days after I ordered it and like other comments I've read it was full of heavy duty staples. It was double packaged. There had to be over 50 staples. It was defiantly packaged securely. After dimantaling the packing I finally got to the hitch. There were a few scratches on the hitch from all the staples but a bit of black touch up paint took care of that. After all the hitch is going to be used and get scrached by me anyways. Four bolts and it was together. It fit perfictly it my existing rails. By the way it's heavier than my other hitches. I wound be apprehensive to pull my new trailer. If your looking for a great hitch at a great price you can't go wrong.
Unlike other reviews...I will say that my packages all arrived in perfect condition. (Boxes were all intact). Assembling the Q20 is a breeze and by all appearances this hitch certainly seems to be more than adequate for my needs. I haven't had a chance to actually use it yet...but from what I can tell, I certainly don't expect any issues. I like the way the hitch latches and unlatches, and that you can add a lock to prevent someone from opening the jaws while you are parked somewhere. I think the only thing I'll add is a lock in place of one of the pins...just to make it difficult for someone to remove and steal the hitch.
# 6
Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter - 20,000 lbs
We have the Anderson Hitch installed on our 2017 Ford SuperDuty and pull a Reflection 337RLS. We have traveled over 4,000 miles and have been extremely satisfied. The hitch allows plenty of clearance between 5th wheel, bed, and the truck cab. Hook-up and disconnect has always been easy, even with RV lots that were uneven dirt lots. I use Curt thin rubber sound dampeners (item 16900) and this provides a quiet, tight fit between the rails and hitch. Of course the light weight makes it easy to remove when not towing and less weight when you are towing. A great product for the right truck, trailer combination.
After receiving the kit i saw another one on the shelf at a local store. I noticed the one on the shelf had a steel ball cup mounted to it. Mine did not have that part. I called andersen and asked if the ball cup was available for purchase seperately. They told me no need to purchase bevause they will ship me one for free! Later on, i towed my trailer to a camp site and upon arrival i could not get the release pin to open to drop the trailer while we stayed in it. I called andersen and described the problem i had, they shipped a whole new block and cable assembly for free!! I am ver pleased with the product and also impressed with the level of customer service!
# 7
Curt A16 5th Wheel Trailer Hitch w/ R16 Slider - Dual Jaw - 16,000 lbs
Upgraded from TT to fifth wheel. Once I learned the basic operation I have had mo problems with this hitch. Rides a little high because of adapter for factory puck adaptor but still fits my tonneau cover which I also bought from etrailer.
First off I just got done installing the hitch and I hooked on my 35ft fith wheel trailer and went for a ride with windows down sun roof open and not a single rattle , clank , or noise from the bed of the truck with this hitch . It was easy to assemble but I did have one spot where the paint got chipped on the slider during shipping so I just touched it up . Very satisfied with hitch it latches automatically when you back in to it and the slider part works like it should .
# 8
B&W Patriot 5th Wheel Trailer Hitch - Dual Jaw - 18,000 lbs
This 5th wheel has exceeded all my expectations. It’s worked flawlessly for thousands of miles and many different type of 5th wheels trailers. Not a peep, B&W FTW!!
So far this has been a great hitch. Takes up a lot less space than the massive auto slider hitch that I had previously, and have had no problem with any sharp turns so far. It is also much easier to handle by myself taking it out of the truck. The only thing I’ve had some problems with is getting the handle lock pin out once I’m ready to disconnect. To solve, I’ve started wedging the flat part of my crowbar under the head of the pin and tapping it with a rubber mallet from underneath.
# 9
Reese M5 5th Wheel Trailer Hitch - Single Jaw - 20,000 lbs
Tried to install this on a 2001 Chevy Silverado 3500, dual rear wheel, long bed, 4x4, diesel engine truck. The clamp style mounting simply does not work. The ONLY way I can see this working is by drilling added holes in the frame of the truck at the front end of the side plates. This is because of a bend in the frame at the clamp location. Also at this location the frame is boxed in and any bolt holes will be hidden. Bolts would have to fished in with bolt wires.
I am very pleased with my purchase of the Reese M5, a major improvement over my old receiver. Great service from etrailer as well.
# 10
Curt A25 5th Wheel Trailer Hitch - Dual Jaw - 25,000 lbs
Ive been using this fifth wheel set up for about 5 months now and I don't have any complaints. I pull a 2022 Heartland Cyclone 4006 toyhauler fifth wheel. Loaded down its usually weighing between 18 to 20,000 lbs depending on what we are hauling.
Easy to order from etrailer with fast shipping. Ordered on Mon estimated delivery on Fri but came in only 2 days for a deliver Wed. Curt A25 hitch packaged very well good instruction easy assembly on tailgate filling installed and torqued in less that 30 mins.
# 11
Curt A16 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs
I purchased both the Curt A16 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs - C16120, and Reese Pull Pin Lock Plates for 5th Wheel Trailer Hitches - Qty 4 - RP58093 for my F350 SD 4X4 Crew Cab Long Bed. I'm pulling a 30' Retro 5th. Wheel and at times I pull my tandem axle UTV Trailer (Double Trailers) . I already had the rails installed in my truck, this fit right in and I used the new Pins and Lock Plates for securing to truck. I have pulled all over from South Dakota and the Northwest. The Hitch has performed Flawlessly. No bucking, nor clunking. Very quiet and smooth ride. I would recommend this set up to anyone for convenience of Hook up and Disconnect, Excellent towing, quiet, and the security of the lock pins. I use Disc locks to prevent access for bolt cutters.
I was fully expecting a hitch in excess of 100 pounds to show up in a destroyed box. This did not. They had taken the Time and effort to cover the box with an additional layer of cardboard and it must have had a million staples in it. It was almost comical, you will need a crowbar or large screwdriver to get it open. However, when I did finally get the package open I found a perfectly un scratched hitch with no missing parts. I have not pulled with the hitch yet but , it does look like it is going to perform great. I'm using this in a 2006 ram 2500 4x4 short bed pulling a 2015 forest river Salem and it allows 91 degrees of turning due to the clipped corners on the front cap of the trailer. I will be curious to see how long the rubber isolators last before needing replaced and if they are readily available. Also the curt sticker on the hitch was peeling off when I took it out of the box, would be nice to get that replaced.
# 12
Curt A20 5th Wheel Trailer Hitch - Dual Jaw - 20,000 lbs
I have towed with the Curt A20 for a few thousand miles. I really like this hitch. The visual hooked versus unkooked indicator is awesome. It operates flawlessly. I do get some chucking over bridge expansion joints. However, it seems like most people have this problem. On normal roads it pulls great.
Hitch slid into existing rails after a very minor adjustment. Took my son and I about 25 minutes to assemble, torgue bolts and adjust rails in the bed of my truck. we have used it twice already and camper did not bang and pop like it did on old worn out receiver. The ordering process was also very smooth. Kelsey took the time to explain the differences in the hitches before I made my decision! I Would recommend both etrailer and this hitch if you are looking to change out!
# 13
Curt PowerRide 5th Wheel Trailer Hitch - Dual Jaw - 30,000 lbs
I would give this hitch 5 stars but it was damaged when I got it. The handle was apparently dented when it was shipped so I had the choice of either sending sending back a 125 pound hitch or banging out a dent in the handle and getting the damn thing installed.
# 14
B&W Patriot 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs
Product is very well made. Glad I went with B and W Patriot Hitch. Once the bed rails were installed the rest was a breeze. Now it's time to get a 5th wheel and hit the open road. etrailer, my go-to website.
I bought this hitch to replace a slider hitch from another manufacturer. I wanted something I could get out of the bed without help, and with the 2" offset, I can get plenty of angle in a tight turn, thus eliminating the need for a slider. So far this hitch is fantastic. Hook up is so easy. Handle moves with zero effort. Same for unhooking. As soon as it was installed, I did a test run, and it was rock solid. I tried to make it chuck when starting and stopping. It wouldn't do it. Zero slop. On that note, the tolerances are tight on this thing from the bolt holes to the legs that insert it into the rails. My rails we're not perfectly lined up and required a little dremel and foot stomping to get it in the rails. In summary, if your looking for solid, conventional, non-slider FW hitch, this one is a great choice.
# 15
Curt E16 5th Wheel Trailer Hitch w/ R16 Roller - Slide Bar Jaw - 16,000 lbs
Etrailer sent me a one year follow-up email. Since purchasing this I've used it to tow our 11k lb camper about 5k miles. The hitch and slider have worked exactly as they should and I have no complaints.
Well, I haven't towed with it yet but we'll see how that goes. I purchased this hitch because I needed to drop the height as much as 6 inches. My previous hitch was dropped to the lowest setting and still 17 inches high! This E16 goes down to 14 inches... Assembly was straight forward and all pieces were present ( even 4 big washers which were not illustrated anywhere in the instructions as to where they went) The hitch seems well built but the welder needs to be more thorough in cleaning his Slag (got my finger good when I picked up the top plate) Stickers were falling off everywhere (my heat gun fixed those) But a couple notable design flaws... The top cradle for the 5th wheel plate is a triangular shaped arch and the top plate has an axle which is perfectly round. So when the 5th wheel assembly is down in the cradle, there are only two little points of contact instead of the cradle fitting uniformly around the axle rods...we'll see what kind of wear this causes. Next, the green ring on the indicator rod looked like a 3 year old toddler wiped lipstick on it. (Green paint is supposed to be in the little groove cut in the rod but instead, is smeared all over the end of the rod) Lastly... The side plates have a two rows of holes for height adjustment...I have installed the bolts to position the overall height at the lowest possible setting. However, there are two more holes in the tie plate but the casting prevents the sideplates from dropping down even lower. Definitely confused as to what the extra holes are for and disappointed that I can't drop this even lower... Definitely seems heavy duty, but again, I haven't towed yet, so hopefully the play in the base rails doesn't translate into obnoxious clanking and rattling.... If so, I will definitely be doing another review
# 16
Curt A20 5th Wheel Trailer Hitch w/ R20 Slider - Dual Jaw - 20,000 lbs
Great Hitch, very happy with this unit. Have pulled the 18K lb fifth wheel over 25K miles (Florida to Idaho, back to Florida and now Alaska). We have covered many rough roads and challenging situations, without problems and have never had a bad couple. The hitch indicator on front of head gives a clear indication of latching condition, and the latch handle has a locking pin for added protection. This pin is the only issue I have had, which can be trapped under the slide plate if your truck is at an angle (beyond about 35 deg) from the rv. I make it a point to pull this pin prior to backing if I am the least bit concerned. This is a great hitch! Excellent quality and it's made here in America.
This is very well built and operates great. Once I got the first rail positioned and mounted, everything else was very easy. The R20 slider came in a single box and was very heavy. The packaging is not suitable for the weight. As others have also reported, the package was completely demolished when it arrived. Thankfully , all the part’s made it okay and nothing was damaged. I love the product.
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."