# 1
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 7" Drop, 7-1/2" Rise - 10K - Black
Using this hitch on my Expedition and LandCruiser. A standard hitch caused my 12 ft utility trailer to not ride level when towed behind either truck. Since my trucks have different ride heights, the B&W hitch allows me to get the perfect drop for each truck. Trailer responds much better to road issues level as opposed to angled behind the truck. Additionally, its rating exceeds both of the trucks’ towing capabilities, so I have the hitch I need for the future as I have plans for a heavier trailer down the road. Quality and fitment of the hitch is excellent.
hitch worked well for my small utility trailer behind my new full size truck. Only possible down side is the ball I'm not using does sit somewhat low and could in certain circumstances hit a kerb or other bump. Haven't had that issue and think it's unlikely, but it is possible. Note I need the ball mounted on the lowest seting, 7" drop to work with this trailer on this truck
# 2
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 6-1/4" Long - 3,500 lbs
Arrived earlier than promised, fits and functions as it should. A little disappointed in the finish. The powder coating was already flaking off in the package and some rust starting. It's going to get beat up anyway in use, but still. My old crome plated one did not have this issue.
excellent products, hitch installed in about a half hour and fit perfect. Installed your wiring kit and drawbar and towed my trailer that day.
# 3
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
Good hitch
Thank you George and etrailer. Very fast and timely delivery, only 2 days from ordering!! Product took 1 1/2 hours to install, with the assistance of my 13 year Grandson. We are ready to use the hitch this summer. Future trailer needs will be sought thru etrailer.
# 4
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
Great company to deal with would recommend them for your trailer hitch needs!!
Received my drawtite hitch, draw bar and wiring harness quickly.The draw bar pin was missing, but received excellence service from your customer service department (Sherry). Looks great and can't wait to pick up my trailer and go camping.
# 5
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
Arrived earlier than promised, fits and functions as it should. A little disappointed in the finish. The powder coating was already flaking off in the package and some rust starting. It's going to get beat up anyway in use, but still. My old crome plated one did not have this issue.
excellent products, hitch installed in about a half hour and fit perfect. Installed your wiring kit and drawbar and towed my trailer that day.
# 6
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
I just purchased a new hideaway hitch system. But the hitch sits only 15 inches off the ground at best. And, my trailer coupling is 22-23 inches off ground. So l needed 7-8 inches of rise on the new 1.25 inch receiver system. Internet research took me to etrailer and the Brophy hitch. I got 5.5 inches with the Brophy hitch, the highest available for a 1.25 inch receiver I could find. The others are limited to 5 inches max. I added another 1.5 inches with your Curt shock absorbing hitch. Voila, with a combined 7 inches of rise and on level ground the trailer now rides perfectly level!!!! Both parts were very easy to connect. Delivery was speedy. Thank you for saving the day and my investment in an expensive new hideaway hitch!
Quality parts, but the extra rise with this and the Curt Rocker Ball still wasn’t enough to avoid scraping the top of my inclined road while towing my boat.
# 7
Curt Class II Euro Style Drawbar with 2" Ball - 2-3/4" Rise - 3,500 lbs
Small footprint makes for classy look on my Equinox. Pulled my Bass boat no difficulties.
It is heavy duty and well-built. I am not disappointed at all and I get comments everyone smile from people who are used to traveling overseas asking where I got the European style hitch from. The only downside is the lack of interchangeability in the size of the ball itself but I don’t think that’s a big deal because I set it up for what I need it for and keep a vehicle vehicle for longer periods of time.
# 8
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Needed a large drop hitch to pull my car trailer. This item came quickly and worked perfectly.
This extreme rise ball mount is what I need to make my passenger car into a back-up trailer puller. It is well built and has a welded strut to reinforce the long rise/drop ball mount. The "shock damper" feature is sure to help absorb the leverage movement that a rise/drop ball mount passes on to the hitch receiver itself.
# 9
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
Arrived earlier than promised, fits and functions as it should. A little disappointed in the finish. The powder coating was already flaking off in the package and some rust starting. It's going to get beat up anyway in use, but still. My old crome plated one did not have this issue.
excellent products, hitch installed in about a half hour and fit perfect. Installed your wiring kit and drawbar and towed my trailer that day.
# 10
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
Arrived earlier than promised, fits and functions as it should. A little disappointed in the finish. The powder coating was already flaking off in the package and some rust starting. It's going to get beat up anyway in use, but still. My old crome plated one did not have this issue.
excellent products, hitch installed in about a half hour and fit perfect. Installed your wiring kit and drawbar and towed my trailer that day.
# 11
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Drop - 7,500 lbs
Very happy with my purchase
Purchased for a 2006 Jeep liberty. the only issue I have is that it connects right below the spare tire, making trailer attachment more difficult that it should be. If I had gotten a slightly longer hitch, wouldn't have been an issue. It's not a deal breaker, and the hitch itself has works perfectly.
# 12
Curt Class II Drawbar - 3-1/8" Rise - 11-1/4" Long - 3,500 lbs
Arrived earlier than promised, fits and functions as it should. A little disappointed in the finish. The powder coating was already flaking off in the package and some rust starting. It's going to get beat up anyway in use, but still. My old crome plated one did not have this issue.
excellent products, hitch installed in about a half hour and fit perfect. Installed your wiring kit and drawbar and towed my trailer that day.
# 13
Draw-Tite Ball Mount - 3/4" Rise, 2" Drop - 10-1/2" Long - 6,000 lbs
I searched the internet to put a hitch on my 2016 Chevy Equinox and found an instructional video from eTrailer.com where they installed on my exact car. I decided to go with eTrailer.com because they answered all my questions and because of the video-I support businesses that go the extra mile with these videos. Shipping was quick and well tracked, however, the box was flimsy and the one end of the hitch had come out of the box side and the ball mount could have easily come out of that hole during shipping. If I were eTrailer.com I'd charge an extra couple of bucks for more sturdy boxes-people will still buy as eTrailer is a well-trusted brand and this would overcome a lot of the negative reviews you'll see on their site about this shipping issue in their own reviews :-) I installed the hitch by myself (definitely recommend help as two people holding it up to the frame makes attaching 100% easier) in about 45 minutes total (out of the box, read instructions, review video again and installation complete). All hardware went on with no issues. Great quality hitch! I also bought the lesser expensive wiring assembly because most recent equinox's come hitch ready with pre-wired assembly in the left side compartment-snap and done. Picked up a new trailer at Home Depot within days and drove 5 feet and the clacking was horrible. I had always had a welded hitch before buying a hitch that took a ball mount. I really thought something was wrong and when I searched the internet that night it turns out this is very common. However, all you need is some sort of hitch "silencing" device. The number of options will drive you mad but I went with the Roadmaster Quiet Hitch and it did the trick for much less than most of the other options. If I were eTrailer.com I'd have that as one of the RECOMMENDED add-ons and explanation why its super-worthy when customers are buying a hitch. Would have saved me the time and hassle of dealing with it later and the extra shipping charge for buying after the fact when I got free shipping for the other items the first time :-) All in all, I'm super, super happy with my hitch, wiring assembly, ball mount, ball mount locking pin and the hitch silencer. Buy with confidence from eTrailer.com Paul R., Syracuse, NY
Ordered a receiver, hitch, ball, and wire harness for my 2017 Chevy Equinox. It was shipped the same day and at my house 2 days later. I installed it in the driveway in less than an hour! To make an already great online purchase better with the tracking info was install videos and directions for all the products I purchased. Etrailer.com saved me $210 over taking it to a local trailer rental retailer.
# 14
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
Great company to deal with would recommend them for your trailer hitch needs!!
Received my drawtite hitch, draw bar and wiring harness quickly.The draw bar pin was missing, but received excellence service from your customer service department (Sherry). Looks great and can't wait to pick up my trailer and go camping.
# 15
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
Works great. Needed the drop to tow a utility trailer at level.
Have pulled trailer several times with this hitch. Very impressive, smoother and easier on truck than conventional hitch, less jerking and bounce.
# 16
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
I ordered this item just before midnight on a Saturday, it shows up Wednesday morning at 9am. Super fast shipping, reasonable prices, virtually any kind of towing anything that you could ever need, & the customer service was great. Computers are not my thing at all, but their website made my search and eventual purchase an absolute breeze. I highly recommend them, and I will most definitely shop here again!!
Thank you George and etrailer. Very fast and timely delivery, only 2 days from ordering!! Product took 1 1/2 hours to install, with the assistance of my 13 year Grandson. We are ready to use the hitch this summer. Future trailer needs will be sought thru etrailer.
# 17
Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs
The Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs - C45019 is idle for pulling a utility trailer for most around the house yard work just remember to follow all safety rules.
Very well built and finished. Excellent value for the price. Curt builds an excellent product. Would highly recommend
# 18
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
A great please to order(etrailer.com), very good explanation of product details, fast delivery.
Great company to deal with would recommend them for your trailer hitch needs!!
# 19
Self-Locking, Adjustable 2-Ball Mount w Chrome Balls - 2.5" Hitch - 8" Drop, 9" Rise
Great hitch at a great price. Shipping was fast. Ordered online and it was a breeze. The picture of the hitch showed it had a sleeve but when it came there was no sleeve. Which was nice fits great in my 21/2 receiver.
I use this everyday, and I love it. It still looks like new, the key locks and slides still work like they did when they were new. I would 100% buy another one.
# 20
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
What our customers are saying:
"very easy to shop"