Most Popular Self Adjust for 2002 Jeep TJ

Excellent. Be sure your axle bearing seals are not leaking grease onto the backing plate.

Brakes work great! I used a self tapping screw to ground the brake to the trailer. This worked really well and I didn't need to run a ground wire. The studs needed a trip to the hardware store to get some 7/16 by 40 pitch (fine thread) nylock nuts. All in all a nice brake setup.

Click to Enlarge

Etrailer is great. I have been using them since 2014 or 2015 for various stuff. This order was for electric Dexter brakes - ten inch. Some other suppliers offer similar ones for half price but they are not as good as Etrailer. Auto-adjust (they call it Never-adjust) is very important. Also the shoes are cut nicer. One of the electromagnets failed - open circuit - first time that happened. I had 6600 miles on it. Curious failure. Recommended changeout is 12,000 miles anyhow so I am not real upset. When you're flying down a 9% grade in the Rockies you want the best brakes and the best tires. Get Etrailer. Get the largest wheel and highest load range tires that will fit your trailer from Etrailer. I considered modifying the brakes to disc. $2000 plus they are not maintenance free either. Nothing is "maintenance free". I could change out all the brakes and drums 7 times for that $.

This is what you want. Do not cheap out. At first, I took my trailer to a trailer shop and specified American parts and told them to replace my brakes. They put no brand Chinese crap in my trailer and on my first trip in the rain I totaled my truck and damaged, my trailer and track car all because the brakes did nothing. So I bought the Dexters from Etrailer, put them in myself, and now the rig stops beautifully.

I ordered a complete 4 Brake and Hub kit to replace my old brakes on my Toy Hauler. My wife and I go fron Florida to the Black Hills and visit our family there as wells as enjoy the Sturgis Bike Rally as well as the beautiful country. Madison M. and Robert R. assisted me in getting the correct replacement brakes and even saved me money on making the whole package up with no issues, even answered my numerous questions. Once I received the complete set I noticed to hub rear seals damaged in shipping. I ordered replacements seal and Madison was on it and will refund my seals! Good Job all around by Madison and Robert! Thanks Very Much.

Replaced old non-self-adjusting trailer brake assemblies with new self-adjusting ones. See photos of old & new. TIP: Temporarily tape new wires out of the way to avoid pinching them between the axle flange and backing plate when mounting the new brake assemblies (ask me how I know).

Click to Enlarge

Click to Enlarge

Exact replacement for the airstream 12x 2 brake assembly. Service and delivery were excellent.

Click to Enlarge

Did a remove and replace. Original Dexter Brake assemblies had curved wear and missing the brake adjusting plugs, getting dust and no doubt water in them from the Airstream plant in Jackson Center, OH. All EIGHT of eight wheels had them missing. That was my Problem. Now the Cure: etrailer had two Brake Assembly kits at my door three days after ordering. I installed them today and they work and had supplied five fresh locking bolts and the two plastic brake adjusting plugs. I am one happy Airstream trailer camper. First time doing brakes on a trailer and it was much easier doing the complete assembly. Will break them in as suggested in their installation instructions. I recommended etrailer.com on the Airforums.com that Airstream owners follow for information. One member already said he ordered parts, as he did not know how to find what he needed. Excellent service ordering from my computer. Notice of parts being shipped was emailed to me. Parts were dropped off at my doorstop. If the carton had some glazed doughnuts included... it would have been 5% better. George J.... you did me right as a first time customer.

Click to Enlarge

Click to Enlarge

Nice brakes ready to go

Product is great and easy to set up however the packaging from which it was sent as was a little less desirable from my seals getting dented and brake assemblies where thrown around in box with tears in box but all should be usable