Best 1995 Ford F-150 Fifth Wheel Hitches

Etrailer sent me a one year follow-up email. Since purchasing this I've used it to tow our 11k lb camper about 5k miles. The hitch and slider have worked exactly as they should and I have no complaints.

Click to Enlarge

Well, I haven't towed with it yet but we'll see how that goes. I purchased this hitch because I needed to drop the height as much as 6 inches. My previous hitch was dropped to the lowest setting and still 17 inches high! This E16 goes down to 14 inches... Assembly was straight forward and all pieces were present ( even 4 big washers which were not illustrated anywhere in the instructions as to where they went) The hitch seems well built but the welder needs to be more thorough in cleaning his Slag (got my finger good when I picked up the top plate) Stickers were falling off everywhere (my heat gun fixed those) But a couple notable design flaws... The top cradle for the 5th wheel plate is a triangular shaped arch and the top plate has an axle which is perfectly round. So when the 5th wheel assembly is down in the cradle, there are only two little points of contact instead of the cradle fitting uniformly around the axle rods...we'll see what kind of wear this causes. Next, the green ring on the indicator rod looked like a 3 year old toddler wiped lipstick on it. (Green paint is supposed to be in the little groove cut in the rod but instead, is smeared all over the end of the rod) Lastly... The side plates have a two rows of holes for height adjustment...I have installed the bolts to position the overall height at the lowest possible setting. However, there are two more holes in the tie plate but the casting prevents the sideplates from dropping down even lower. Definitely confused as to what the extra holes are for and disappointed that I can't drop this even lower... Definitely seems heavy duty, but again, I haven't towed yet, so hopefully the play in the base rails doesn't translate into obnoxious clanking and rattling.... If so, I will definitely be doing another review

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This product gets a three based on shipping condition only. etrailer customer service and shipping time was excellent as usual. The shipment arrived 2 days after the order was placed, as promised. However, as others have noted, the product packing is poor. The boxes arrived with significant damage resulting in cosmetic damage to several parts. I haven't put the hitch to use yet but I am assuming it will work correctly. I will leave a followup after I use it.

Click to Enlarge

Click to Enlarge

The hitch arrived nicely packed in two boxes. Very easy to assemble and install on my existing bed rails. I took the RV out for a first run with the hitch, and it performed as advertised. It was a no fuss transaction and the hitch arrived on-time!

Click to Enlarge

Upgraded from TT to fifth wheel. Once I learned the basic operation I have had mo problems with this hitch. Rides a little high because of adapter for factory puck adaptor but still fits my tonneau cover which I also bought from etrailer.

Click to Enlarge

Click to Enlarge

First off I just got done installing the hitch and I hooked on my 35ft fith wheel trailer and went for a ride with windows down sun roof open and not a single rattle , clank , or noise from the bed of the truck with this hitch . It was easy to assemble but I did have one spot where the paint got chipped on the slider during shipping so I just touched it up . Very satisfied with hitch it latches automatically when you back in to it and the slider part works like it should .

Click to Enlarge

Click to Enlarge

Click to Enlarge

Love the hitch. Hooks up easily and solid. Gives plenty of clearance. Only downside is it’s very noisy and you really feel the trailer. But for the price and weight it’s still 5 stars. Going to go up to a highway payload truck and will be getting the B&W companion for that. Not a reflection of the performance of this hitch though

Nice ride with this hitch . I was kind of on the fence about the pivoting but I’m good with .

After ordering rails for a fifth wheel that I had in an older truck, I was told the rails I ordered would work with my fifth wheel, however after installing the front rail, the fifth wheel would not work with the rails ordered. I ended up ordering a new fifth wheel plate. That was easier than removing the frame brackets I had already installed. It appears that there was a mis communication between the person I talked to with etrailer. Instead of a 1/2 day install it took a day and a half plus wait time for the fifth wheel to get to my address. However once installed it appears to be good.

Click to Enlarge

The hitch worked great. Reason for the 2 stars is the package got delayed twice in transit and I had to reschedule the pickup of my fifth wheel. When I also received the package the main crossmember bar was bent at the mounting point. Luckily I was able to bend it back but UPS needs to get there act together.

Click to Enlarge

Love it works great

Click to Enlarge

Wow, where to begin. I can't imagine towing a 5th wheel trailer in a shorter bed truck without an autoslide setup. After the initial install I noted on the 2nd(?) trip a clunking noise during acceleration after a stop - a couple emails back and forth with Demco support, as well as a quick phone call, and it was all sorted out (user error) with no further issues - Thank you Demco! I tow a short & light Jayco 5th wheel with a 1/2 ton shortbed and having the ability to drive, turn, and park the camper without having to get out of the truck to manually engage or disengage a slide on the hitch has made for much more relaxing weekends away. The Hijacker autoslide gives PLENTY of space between the camper and cab and I've never had to worry, but I did my homework and ran the numbers well before I purchased my hitch so I wasn't surprised. I would say the only downside for me would be the weight and bulkiness of the hitch. Not having the means to easily remove and store it between trips, the hitch is forced to live in the bed of the truck right now, but I did know about the weight going into the purchase. All in all, for the peace of mind the Demco autoslide gives me, I'd spend the money all over again.

I purchased both the Curt A16 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs - C16120, and Reese Pull Pin Lock Plates for 5th Wheel Trailer Hitches - Qty 4 - RP58093 for my F350 SD 4X4 Crew Cab Long Bed. I'm pulling a 30' Retro 5th. Wheel and at times I pull my tandem axle UTV Trailer (Double Trailers) . I already had the rails installed in my truck, this fit right in and I used the new Pins and Lock Plates for securing to truck. I have pulled all over from South Dakota and the Northwest. The Hitch has performed Flawlessly. No bucking, nor clunking. Very quiet and smooth ride. I would recommend this set up to anyone for convenience of Hook up and Disconnect, Excellent towing, quiet, and the security of the lock pins. I use Disc locks to prevent access for bolt cutters.

Click to Enlarge

I was fully expecting a hitch in excess of 100 pounds to show up in a destroyed box. This did not. They had taken the Time and effort to cover the box with an additional layer of cardboard and it must have had a million staples in it. It was almost comical, you will need a crowbar or large screwdriver to get it open. However, when I did finally get the package open I found a perfectly un scratched hitch with no missing parts. I have not pulled with the hitch yet but , it does look like it is going to perform great. I'm using this in a 2006 ram 2500 4x4 short bed pulling a 2015 forest river Salem and it allows 91 degrees of turning due to the clipped corners on the front cap of the trailer. I will be curious to see how long the rubber isolators last before needing replaced and if they are readily available. Also the curt sticker on the hitch was peeling off when I took it out of the box, would be nice to get that replaced.

Click to Enlarge

We have the turning point pin on our rig so we had to get a wedge. I don't know if it was the wedge or the hitch but unless we were perfectly straight and level, we couldn't hitch up. Same with unhitching. After the 3rd time of not being able to unhitch without taking the entire head of the hitch off, we locked up the turning point and got a new hitch and do not use a wedge. Also, with only a bar going across, the pin seemed to wiggle around a lot.

Click to Enlarge

the 5th wheel hitch kit had everything I needed for install for f150 at a great price! takes a bit of work but set aside a few hours with basic tools and you’re ready to tow.

We have the Anderson Hitch installed on our 2017 Ford SuperDuty and pull a Reflection 337RLS. We have traveled over 4,000 miles and have been extremely satisfied. The hitch allows plenty of clearance between 5th wheel, bed, and the truck cab. Hook-up and disconnect has always been easy, even with RV lots that were uneven dirt lots. I use Curt thin rubber sound dampeners (item 16900) and this provides a quiet, tight fit between the rails and hitch. Of course the light weight makes it easy to remove when not towing and less weight when you are towing. A great product for the right truck, trailer combination.

Click to Enlarge

After receiving the kit i saw another one on the shelf at a local store. I noticed the one on the shelf had a steel ball cup mounted to it. Mine did not have that part. I called andersen and asked if the ball cup was available for purchase seperately. They told me no need to purchase bevause they will ship me one for free! Later on, i towed my trailer to a camp site and upon arrival i could not get the release pin to open to drop the trailer while we stayed in it. I called andersen and described the problem i had, they shipped a whole new block and cable assembly for free!! I am ver pleased with the product and also impressed with the level of customer service!

Click to Enlarge

The hitch is great. I installed it myself and it worked very well pulling a 5th Wheel Trailer across the country last year. I have learned however that one must start out from corners slower to avoid a large "clunk" as the hitch slides in the frame per the inherent design. Great Product!

From the start,the folks at etrailer were very courteous and helpful. I called many times during the decision making process and everyone was always right there to help. When I finally decided to purchase the B&W 18K Patriot w/slider Bailey was there to help with the order. She explained the free freight shipping and it was a done deal. It arrived 1 day earlier than stated, as soon as I opened the cartons it was in fact the good ol' American made quality I was accustomed to growing up. I proceeded to install on the B&W rails I purchased and installed locally on my 2022 F250 Lariat/ Tremor.I had a small hick- up with the install and etrailer gave me B&W's # as they like to handle issues themselves. Stephanie at B&W was just as courteous. Overall a very pleasant experience. The Patriot was basically plug and play. I then connected my 2021 Grand Design 303RLS Reflection and rolled down yhe road. What a smooth and quiet ride, loved it! I would definitely recommend etrailer and their products. Thank you all that helped.

Click to Enlarge

Click to Enlarge

So far so good. Hitch appears to be good quality. It was easy to install after installing the mounting kit. I haven't used it yet so I can't comment on how it handles when pulling a camper.

Demco auto slide hitch works very well with my crew cab short bed Ram. Fits under my tonneau cover nicely. Trouble free thus far. Had to purchase a Demco plate for the camper to make the Rhino box hitch work. etrailer personnel were great in helping ensure I had the right products and kept me well informed of shipping dates.

Click to Enlarge

My wife and I are full-time RVers, and have used this slider hitch from the get-go while traveling around seeing the country over the past year. We are happy with our purchase, which has proven to be both easy to hook up, adjust, and functions well, as advertised. The only matter I think you may want to address are the thick plastic removable maintenance access covers which tend to bow, and the areas around the attachment holes have melted, in the hot weather. Perhaps instead using a light metal for the covers would be better solution. We are very happy overall with this hitch, and plan to keep it . Thank you.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Product is very well made. Glad I went with B and W Patriot Hitch. Once the bed rails were installed the rest was a breeze. Now it's time to get a 5th wheel and hit the open road. etrailer, my go-to website.

Click to Enlarge

Click to Enlarge

I bought this hitch to replace a slider hitch from another manufacturer. I wanted something I could get out of the bed without help, and with the 2" offset, I can get plenty of angle in a tight turn, thus eliminating the need for a slider. So far this hitch is fantastic. Hook up is so easy. Handle moves with zero effort. Same for unhooking. As soon as it was installed, I did a test run, and it was rock solid. I tried to make it chuck when starting and stopping. It wouldn't do it. Zero slop. On that note, the tolerances are tight on this thing from the bolt holes to the legs that insert it into the rails. My rails we're not perfectly lined up and required a little dremel and foot stomping to get it in the rails. In summary, if your looking for solid, conventional, non-slider FW hitch, this one is a great choice.

Click to Enlarge

Click to Enlarge

Excellent product and customer service was outstanding. I just bought the product so I haven’t towed with it yet but after many many years of towing with other fifth wheel hitches, I can tell this is going to be an huge improvement!

The truck that got the install is a 2002 Ford F350 Super Duty 7.3 L Diesel dually. The Demco Recon 5th wheel hitch (DM8550043) looks like a well made, heavy duty hitch. All the welds are precise and well done. I like the single wrap around jaw with the real thick bar that backs that up. The handle that pulls out to unlock the jaw moves with ease and locks in the out position when the jaw opens. When the king pin comes in contact with the back of jaw, the jaw wraps around the king pin, the handle closes, you put in the safety pin and your ready to go RVing. I chose the Husky Custom Rails and installation kit (HT31405-686) for my install. The reason I chose these rails over the ones that etrailer had matched up for the hitch is, I had previously installed a set of Airlift Airbags and I didn't want the rail install to interfere with the airbags. It was a good choice, there was no interference at all. If I had not had the bags, I would have chose the rails and install kit that require no drilling. Drilling the holes went very fast and easy, it was torking the rear bolts down that was very difficult. There was not enough room to get a wrench of any kind around the nut. I wound up using a set of vise grips on the nut while a friend of mine torked the bolt slowly from above. All and all I'm happy with the product and I'll give another review in a year.

Click to Enlarge

Click to Enlarge

I wanted to be able to easily utilize my truck bed and this hitch provides that in spades! Easy to remove and install. I absolutely have to give a shout out to Paula on customer service. She was amazing! My first shipment was damaged and missing a vital part. Paula had another one shipped right away and made my return shipment a breeze. She stayed in contact with me to the end. I felt like she shared in my joy once the install was complete! The hitch is super adjustable for optimal placement in the bed and height of the trailer. Make a few quick measurements and it just goes together quickly. Love the dual jaw release lever. Our last 5th wheel hitch had the standard pull to release lever and it was often very difficult to operate. This lever style is a game changer. Overall, I couldn't be more pleased with the product and customer service!

Click to Enlarge

Click to Enlarge

I installed this system in my classic square body Silverado after installing the Turnover Ball BK1400 gooseneck hitch. Both work great together and this companion installed beautifully. I tow a 40’ Cougar camper with it.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

my companion 5th wheel hitch(rvk3370) hitch was delivered on 3/11, I installed it in a couple hours on 3/12. It was a piece of cake, the delivery was made with a lift gate truck that I back my truck up to and had the driver lower the lift gate down onto my tailgate, I unpackaged the hitch and was able to Maneuver it by myself into the puck system on my truck, I have the slider hitch so much heavier than the standard one, but still very easy for my 65 year old body to handle, the B t W was the only hitch I considered because of the ruggedness and quality of their products my truck is a 2023 Ford F 350

Click to Enlarge

Will at eTrailer.com did a great job walking me through the 5th wheel hitch and air lift options that I needed. The B&W Companion Slider Hitch installed like a charm, and looks to be great quality! Nice fit and finish, B&W.

Click to Enlarge

Extremely easy install. You will need a torque wrench that’ll go up to 110 ft/lbs. glad I did my research and went with the B&w gooseneck hitch in anticipation of getting this 5th wheel companion hitch at a later time.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Fast shipping and the box was in perfect condition. I appreciate the amazing customer service. They were friendly and had a good attitude when I called with questions. I look forward to shopping with them in the future. The shipping company called ahead of time and scheduled the delivery because it was such a large item they were friendly and was within their timeframe. Thank you etrailer.com I appreciate it.

Click to Enlarge

Tried to install this on a 2001 Chevy Silverado 3500, dual rear wheel, long bed, 4x4, diesel engine truck. The clamp style mounting simply does not work. The ONLY way I can see this working is by drilling added holes in the frame of the truck at the front end of the side plates. This is because of a bend in the frame at the clamp location. Also at this location the frame is boxed in and any bolt holes will be hidden. Bolts would have to fished in with bolt wires.

Click to Enlarge

I am very pleased with my purchase of the Reese M5, a major improvement over my old receiver. Great service from etrailer as well.

6000 miles towing this year; loaded trailer weight 16,480 lbs (based on CAT scale weight tickets). Hitch is awesome. Very secure with no noticeable chucking. I can remove and install this hitch by myself. The two pieces are very manageable. My fifth B&W hitch over the years; 2 turnover ball goosenecks and 2 tow & stows. Quality hitches which I recommend highly.

Click to Enlarge

Very happy with the B&W hitch we received. etrailer and their staff were excellent to work with. Shipping was sooner than projected. And the installation was extremely easy. Would absolutely use etrailer again as well as B&W products. Thank you all!

Click to Enlarge

Click to Enlarge

Click to Enlarge

GREAT GREAT GREAT EXPERIENCE AND EVERYTHING THAT GOES WITH THIS WEB SITE.....PRODUCT TO PRICING TO SERVICE.....

Click to Enlarge

Excellent quality products from Reese along with great service and pricing from e-trailer. I did run into some availability issues from the manufacturer with my initial order but Kelsey informed me quickly so we could modify my order. My order was shipped very promptly as promised. Thank you Kelsey for the amazing customer service!